Loading Dock Shelters

Loading Dock Shelters & Seals

Call An Easy Rack Loading Dock Shelter Expert For A FREE Quote – 888-776-3720.

Quality Dock Shelters

Easy Rack’s superior 36 oz. nylon reinforced vinyl facing has a higher tear strength than equivalent weight hypalon. The chemically sealed ends prevent moisture infiltration. It is mounted on and bonded on a durable wolmanized wood and contains a full height air escape tunnel. The unit consists of a three (3) piece construction (12″ high; sides – beveled sides with 9.” width at the wall and 12″ width at the face) and a through the wall installation kit that is included. 5″ maximum compression is recommended.  Application with a flush dock to building in conjunction with an Edge-O-Dock use a twenty (20) inch projection Dock Seal.  This unit is non-returnable.

Dock Seal/Shelter Combinations

loading-dock-shelterOur Dock Shelter Combo is for use with an 8’W x 10’H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run-off. Header measures 114″W with a 30″ drop curtain. Side (verticals) measure 120″ tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12″W and will taper to 9-1⁄2″ at wall. Verticals are mounted on wooden 2″ x 12″ to allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge-O-Dock use a 20″ projection Dock Seal. Units are non-returnable.

 Dock Shelters

dry-dock-shelterFor dock shelters with doors up to 10’W x 10’H. Reduces oversized doors to match truck opening. Long wear Vestex V-42 fabric is highly resistant to abrasion and tearing. Fiberglass staves are sewn into the flaps. Seal is formed along the sides and top of trailer when the vertical and top panels are pushed inward by the trailer. Recommend minimum 10″ trailer penetration for a good seal. Supporting structure is made of 2 x 4 wolmanized lumber. Shelter is protected by safety yellow steel guide protectors. The top header piece measures 132″W and contains a drop curtain which measures 36″H. Two vertical pieces measure 126″ tall with vertical flaps measuring 21″W. When installed the shelter will close door opening down to 90″W x 90″H opening (between flaps). Includes two yellow steel guide protectors and foam-filled corner pads for extra sealing action.

Retractable Dock Shelter

retractable-dock-sheltersOur Retractable Dock Shelter fits up to a 120″W x 120″H door. Independent spring loaded scissors mechanism allows shelter to retract with the trailer keeping the shelter square. The design also eliminates the need for rigid steel guide protectors. Overall size 132″W x 126″H x 24″ projection. The 40 ounce reinforced vinyl flaps close the opening down to 90″ x 90″. The 36″ header curtain has armor pleats for extended wear. Shelter is black with aluminum edge trim.