Electric Hydraulic Edge-O-Dock levelers is the easiest to operate. After the truck is backed against the dock, push and hold the control button. The leveler raises and the lip will extend and rest on the truck bed. The unit is operated by a ¾ HP. 11/220V, single phase motor pre-wired to 10V. Unit comes complete with motor, pump, control box, cylinder, lines and oil. The Edge-O-Docklevelers permanently attach to the face of the dock. These are recommended for docks at least 48” high. Concrete recess is not required. Details: Service range of 5” up and down; and 2” x 8” x 18” bumpers; standard ramping length of 27”; overall width is Usable width plus 26”. A steel dock edge, optional approach plate, or approach ramp is required for proper installation. Available in 72” 15,000 Capacity (with 36” ramping length for smaller grade), 66” 20,000 Capacity, 72” 20,000 Capacity, 66” 25,000 Capacity and 72” 25,000 Capacity, 72” 25,000 Capacity (with 36” ramping length for smaller grade), 66” 30,000 Capacity, and 72” 30,000 Capacity.
*Please select appropriate size when ordering.

EDGE-O-DOCKLEVELER OPTIONS