Shark Bite "Big Tooth" Tooth Bars for Buckets w/ Bolt-on-Blade.
Heavy duty tooth bars for tough applications that fits of a bolt-on-blade.
Quality materials and workmanship produce a tough long lasting tooth bar. Shanks
are 1 5/8" Heat Treated Cast Steel and conform to ASTM 4150 for greater
strength and abrasion resistance. Features include 1/2" x 4" beveled
mounting bar, 2" wide HD Cast pin-on teeth - side flex pin, adjustable
mounting brackets with dual elongated holes and tension bolts and adjustable
center mounting bracket on tooth bars 72" and over. Simple and quick to
install. Slip the tooth bar onto your blade, mark and drill a hole on each side.
Install the 3/4" bolts and nuts, tighten and it's ready to dig.
See table below for Specs.
BUCKET SIZE (I.D. WIDTH OF BUCKET) |
NO. OF TEETH |
60" to 65" |
6 |
66" to 74" |
7 |
75" to 86" |
8 |
87" to 96" |
9 |
Please Note: The following dimensions are required
when ordering tooth bars: Bucket inside width - Bucket I.D.; thickness
of cutting blade; thickness of bolt-on-blade; distance from inside bucket wall
to center of first bolt and center to center of other bolts.
*Please select appropriate options when ordering.
Available Options: |
Width: |
|
|