Folding Security Gates

Folding Security Gates limit access to hallways and buildings without blocking exposure to air or blocking visibility.

The typical folding gate design is that of an interlocking lattice of galvanized steel, riveted back to back to offer a strong barricade against invasion and to survive exposure to environmental elements.  Standard sizes offered by Easy Rack from 4-1/2' wide by 5-1/2' high single gates to 16' wide by 8-1/2' high double gates.  Door gates are made for door openings between 24” to 48” wide in heights from 61” to 83”.  Portable gates are available in sizes 6 and 12 feet wide.  Easy Rack will also provide custom size single and double security folding gates up to 10’ high.

Folding Security Door Gates

These gates are intended to secure door openings ranging from 24" to 48" wide and 61" to 83" high. They feature a exclusive reversible hinge design that allows them to be mounted to either the right side or the left side of the doorway in either the casing or the face of the opening.  Each folding security door gate comes with a locking bar that can be secured with a padlock.  When not in use, the gate will pivot 180 degrees out of the way when open.

Single Folding Security Gates

These one piece gates are intended for standard openings, patio doors, garages, and industrial and commercial entrances measuring 4-1/2' to 7-1/2' wide and up to 8' in height.   Single folding security gates are shipped preconfigured to lock on the left (default position), but an Easy Rack specialist can have them custom made to lock on the right side.  A ball bearing caster, welded to the lead rail of the gate, is used to aid in the opening and closing of the gate.  Like door gates, single gates will pivot 180 degrees when not in use. To compensate from the loss of structure when the gate is stretched open, a drop pin holds the center of the gate in place.

Double Folding Security Gates

These gates are essential for larger openings, overhead doors, warehouse dock doors, storefronts, and bay doors in factories and warehouses. These two-piece gates can be custom fitted to any size width, and a maximum height of 10'. Because they are Double Gates, each side will pivot 180 degrees out of the way, allowing the gates to be used with dock and overhead warehouse doors in commercial facilities that need an clear passage for vehicles and material handling equipment to pass through.

Portable Folding Security Gates

These gates are routinely used in public schools and hospitals to seal off hallways, cafeteria areas, and sensitive areas within the building.  They feature a two piece design consisting of dual 6’ X 6.5’ sections.  They are easy to install because they are designed to pass through standard door heights and be can be rolled up for convenient storage.  For extremely large entrances or hallways, additional 6’ sections can be added on.

Easy Rack carries a wide variety of material handling equipment, folding security gates pallet racks, and modular buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with distributors located in all 50 States including New York NY, Los Angeles CA, Miami, FL. Chicago, IL. Denver CO., Dallas TX, San Antonio, TX. and Austin, TX. 

Below is a list of articles with the most recent ones listed first.

Folding Gates

Folding security gates block access to passageways and buildings without blocking ventilation or limiting visibility. Warehouses and manufacturers use folding gates to protect halls, entrances to buildings, warehouse doors, docks, and plant entrances.

Security Gates

Security gates improve security, prevent unauthorized access to restricted areas, maintain ventilation to the building, and provide guards and managers with visibility in both directions.

Collapsible Gates

Collapsible gates install over dock doors, lift-up doors, hallways and entranceways and provide ventilation, visibility, and security. Collapsible gates are manufactured from 3/4" wide 14 gauge steel channel that is riveted together back to back.

Portable Security Gates

Portable security gates are often used for restricting access in hospitals, schools and construction sites where certain areas must be protected from theft or vandalism, or where certain areas simply do not need to be accessed by the general public.

Steel Security Gates

teel security gates block access points and create restricted areas for security and safety reasons. Made from a sturdy, impenetrable lattice of 14-guage channel steel, a steel security gate cannot be pushed through or broken down.

Metal Security Gates

Metal security gates block access points and create restricted areas for security and safety reasons. Made from a sturdy, impenetrable lattice of 14-guage channel steel, a metal security gate cannot be pushed through or broken down.

Industrial Security Gates

Industrial security gates are intended to cover access points of different types and sizes. They are made from a sturdy, impenetrable lattice work of 14-guage channel steel.

Folding Security Gates

Warehouses and manufacturers commonly use folding security gates to protect halls, building entrances, bay doors, docks, and rear entrances to plants.

Folding Door Security Gates

Warehouse folding door security gates. Even the sturdiest of doors do not always prevent unauthorized entry or break in. Intruders can and will enter virtually any door if they enough determination.