Loading Dock
Lift
EasyRack Dock
Lifts
Transfer Loads from any truck bed height to
any loading dock height... even ground level!
The Advantage of a EasyRack Dock Lift:
Dock lifts are more versatile than dock levelers, faster
than manual loading and unloading, safer than ramps and inclines, and less
expensive than recesses truck wells. That's why every building should have a
EasyRack Dock Lift.
A Model for Every Application:
EasyRack offers seven standard dock lift modelswith
capacities from 5,000 to 20,000 lbs., platform sizes up to 8' x 12' and a
variety of installation configurations to accommodate any loading dock
requirement. Models featuring an "M" designation are built for use with two
wheel dollies, hand carts, and hand pallet trucks. "H" model designations
can be used with powered devices like powered pallet trucks, counterbalanced
stackers and fork lift trucks.
The Fast, Safe, Easy Way to Service Any
Truck:
With nearly 5' of travel range, dock lifts can service
any type of truck from vans and pickups to tractor trialers and container
trucks. Loads on dock lifts are always kept level making transport safer and
easier than traveling up or down inclines created by dock levelers or ramps.
Rugged Weatherproof Construction:
All EasyRack Dock Lifts are manufactured with
structurally reinforced heavy steel plate platforms to minimize deflection. Wide
base design provides increases rigidity to create the industry's most stable
dock lift. Model SWDL5-59 and SWDL6-59 DURADOCK" dock lifts feature
corrosion resistant galvanized base and legs as standard, resulting in
longer trouble-free service even in hostile environments.
Pit of Top of Ground Mounting:
EasyRack Dock Lifts can be recessed in a pit for ground
level lowering or surface mounted on a concrete pad (requires optional ramp for
grade level access).
Features and
Options
Mechanical Features:
Bevel toe guard platform
Diamond tread deck for improved traction
Diamond tread hinged throw-over plate with lifting
chain
Removable steel handrails with mid-rail, 4' side kick
plate and safety chain
Maintenance strut supports lift for servicing
Removable lifting eyes for ease of installation
Conforms to ANSI MH 29.1 Standards
Electrical/Hydraulic Features:
Pre-wired power unit and control panel
Weatherproof NEMA 4 push-button control pendant with 20'
coil cord
Oversized, low pressure hydraulic cylinders
Heavy-Duty hoses with burst strength 4x greater than
operating pressure
Flow control valve with adjustable lowering time
Excess flow protection for controlled descent of lift in
the unlikely event of a hydraulic line rupture
Standard Voltages: 208/230/460V - 3 Phase
Options and Accessories:
Grade level access ramp (for above ground
lifts)
Accordion skirting or roller shade
NEMA 4 enclosures
Environmentally friendly biodegradable hydraulic fluid
(standard on Dura-Dock models)
Mechanical wheel chock to prevent fork truck from
inadvertently rolling off lift while elevated
Upper travel limit switch- mounted and wired
Warning bell with flashing light
Special paint finishes and custom colors
Corrosion resistant coatings (standard on Dura-Dock
models)
Other bridge plate sizes available
Specifications
H-Series - Heavy-Duty Dock Lifts
Model |
Lift Capacity |
Roll-Over Capacity |
Standard Platform |
Maximum Platform |
Vertical Travel |
Low Height |
Throw-Over Plate |
Rise Time |
Motor |
Approx. Weight |
SWDL10-59H |
10,000 lbs |
10, 000 lbs |
6' x 10' |
8' x 12' |
59" |
16" |
18" x 60" |
34 sec. |
5 HP |
5,000 lbs |
SWDL 12- 59H |
12,000 lbs |
12,000 lbs |
6' x 10' |
8' x 12' |
59" |
16" |
18" x 60" |
36 sec. |
5 HP |
5,200 lbs |
SWDL16-59H |
16,000 lbs |
16,000 lbs |
6' x 10' |
8' x 12' |
59" |
16" |
18" x 60" |
50 sec. |
5 HP |
5,500 lbs |
SWDL 20-59H |
20,000 lbs |
20,000 lbs |
6' x 11' |
8' x 12' |
59" |
22" |
18" x 60" |
60 sec. |
5 HP |
7,900 lbs |
This Web Page Created with PageBreeze Free HTML
Editor
|