Category RSS Feed - Dock Levelers http://www.easyrack.org Easyrack.org sales@easyrack.org (Easyrack.org) en Sat, 20 Oct 2018 16:11:42 GMT http://www.easyrack.org/images/rss_logo.jpg Easyrack.org http://www.easyrack.org Easyrack.org Truck Actuated Dockleveler 48" Deep Pit Dock Levelers http://www.easyrack.org/truck-actuated-dockleveler-deep-pit-p-4376.html Truck Actuated Dockleveler 48" Deep Pit
]]><p> <b>Truck Actuated Dock leveler for 48&#38;quot; Deep Pit With Legs</b> is the Fully Automatic Loading Ramp, so no dock attendant needed. The truck backs against twin actuating arms (bumpers) pushing carriage back (dock and trailer door must be raised). As carriage goes back, deck goes up. When the carriage bumpers contact dock, the deck floats down to rest on trailer. When truck pulls out, deck returns to level supported position automatically. <font color="#0000f0"><b>Details:</b> Uniform Capacity 20,000 lbs; 55,000 psi high strength checker plate deck;12&#38;rdquo; long lip (extends 6 &#38;frac12;&#38;rdquo; into truck); toeguards on each side; service range of 14&#38;rdquo; above and 8&#38;rdquo; below dock; (2) molded bumpers &#38;ndash; 5&#38;rdquo;W x 16&#38;rdquo;H x 6&#38;rdquo;D; and lift by-pass for safety.</font><b>Available in 6&#38;rsquo;W x 6&#38;rsquo;L( Standard 48&#38;quot; Deep Pit) Unit, 6&#38;rsquo;W x 8&#38;rsquo;L Unit, 6&#38;rsquo;W x 8&#38;#39;6&#38;quot;L Unit and 6&#38;rsquo;W x 10&#38;rsquo;L Unit.<br /> <i>*Please select appropriate size when ordering.</i></b></p> <p> <strong><em>Truck Actuated Dockleveler Options:</em></strong></p> <p> &#38;nbsp;</p> <table align="center" border="1" cellpadding="1" cellspacing="1" style="width: 80%"> <thead> <tr> <th scope="col"> &#38;nbsp;Model Number</th> <th> Description&#38;nbsp;</th> <th> Price&#38;nbsp;</th> </tr> </thead> <tbody> <tr> <td> &#38;nbsp;ER-WS-DV</td> <td> &#38;nbsp;Dual Vinyl Weather Stripping (Factory Installed)</td> <td> &#38;nbsp;81.00</td> </tr> <tr> <td> &#38;nbsp;ER-CAS</td> <td> &#38;nbsp;Curb Angle Set (For any size dock leveler)</td> <td> &#38;nbsp;225.00</td> </tr> <tr> <td> &#38;nbsp;ER-TA-30K/6</td> <td> &#38;nbsp;30,000 Pound Capacity For 6 Foot Length</td> <td> &#38;nbsp;673.00</td> </tr> <tr> <td> &#38;nbsp;ER-TA-30K/8</td> <td> &#38;nbsp;30,000 Pound Capacity For 8 Foot Length</td> <td> &#38;nbsp;886.00</td> </tr> <tr> <td> &#38;nbsp;ER-TA-30K/10</td> <td> &#38;nbsp;30,000 Pound Capacity For 10 Foot Length</td> <td> 1449.00</td> </tr> <tr> <td> &#38;nbsp;ER-7W/6</td> <td> &#38;nbsp;7 Foot Width For 6 Foot Length</td> <td> &#38;nbsp;367.00</td> </tr> <tr> <td> &#38;nbsp;ER-7W/8</td> <td> &#38;nbsp;7 Foot Width For&#38;nbsp;8 Foot Length</td> <td> &#38;nbsp;563.00</td> </tr> <tr> <td> &#38;nbsp;ER-7W/10</td> <td> &#38;nbsp;7 Foot Width For&#38;nbsp;10 Foot Length</td> <td> &#38;nbsp;846.00</td> </tr> <tr> <td> &#38;nbsp;ER-FI</td> <td> &#38;nbsp;Foam Insulation</td> <td> &#38;nbsp;192.00</td> </tr> <tr> <td> ER-TL</td> <td> &#38;nbsp;Notch For Trailer Lock</td> <td> &#38;nbsp;111.00</td> </tr> <tr> <td> &#38;nbsp;ER-SPO</td> <td> &#38;nbsp;Shallow Pit Option (minimum depth 24&#38;quot;)</td> <td> &#38;nbsp;101.00</td> </tr> <tr> <td> &#38;nbsp;ER-BE</td> <td> &#38;nbsp;Bumper Extension For Low Docks</td> <td> &#38;nbsp;85</td> </tr> </tbody> </table> <p> <br /> &#38;nbsp;</p>Manufacturer: ]]> Model #: ER-SU-SCB]]> Price: $5159.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/truck-actuated-dockleveler-deep-pit-p-4376.html Mon, 21 Feb 2011 20:08:46 GMT
Truck Actuated Loading Dock Levelers 28" Pit Dock Levelers http://www.easyrack.org/truck-actuated-loading-dock-levelers-pit-p-4375.html Truck Actuated Loading Dock Levelers 28" Pit
]]><p> <b>Truck Actuated Dock leveler for 28&#38;quot;Pit or recessed</b> &#38;nbsp;is the Fully Automatic Loading Ramp, so no dock attendant needed. The truck backs against twin actuating arms (bumpers) pushing carriage back (dock and trailer door must be raised). As carriage goes back, deck goes up. When the carriage bumpers contact dock, the deck floats down to rest on trailer. When truck pulls out, deck returns to level supported position automatically. <font color="#0000f0"><b>Details:</b> Uniform Capacity 20,000 lbs; 55,000 psi high strength checker plate deck;12&#38;rdquo; long lip (extends 6 &#38;frac12;&#38;rdquo; into truck); toeguards on each side; service range of 14&#38;rdquo; above and 8&#38;rdquo; below dock; (2) molded bumpers &#38;ndash; 5&#38;rdquo;W x 16&#38;rdquo;H x 6&#38;rdquo;D; and lift by-pass for safety.</font><b>Available in 6&#38;rsquo;W x 6&#38;rsquo;L( Standard 28&#38;quot; Deep Pit)&#38;nbsp;Unit, 6&#38;rsquo;W x 8&#38;rsquo;L Unit, 6&#38;rsquo;W x 8&#38;#39;6&#38;quot;L Unit&#38;nbsp;&#38;nbsp;and 6&#38;rsquo;W x 10&#38;rsquo;L Unit.<br /> <i>*Please select appropriate size when ordering.</i></b></p> <p> <strong><em>Truck Actuated Dockleveler Options:</em></strong></p> <p> &#38;nbsp;</p> <p> &#38;nbsp;</p> <table align="center" border="1" cellpadding="1" cellspacing="1" style="width: 80%"> <thead> <tr> <th scope="col"> &#38;nbsp;Model Number</th> <th> Description&#38;nbsp;</th> <th> Price&#38;nbsp;</th> </tr> </thead> <tbody> <tr> <td> &#38;nbsp;ER-WS-DV</td> <td> &#38;nbsp;Dual Vinyl Weather Stripping (Factory Installed)</td> <td> &#38;nbsp;81.00</td> </tr> <tr> <td> &#38;nbsp;ER-CAS</td> <td> &#38;nbsp;Curb Angle Set (For any size dock leveler)</td> <td> &#38;nbsp;225.00</td> </tr> <tr> <td> &#38;nbsp;ER-TA-30K/6</td> <td> &#38;nbsp;30,000 Pound Capacity For 6 Foot Length</td> <td> 673.00</td> </tr> <tr> <td> &#38;nbsp;ER-TA-30K/8</td> <td> &#38;nbsp;30,000 Pound Capacity For 8 Foot Length</td> <td> 886.00</td> </tr> <tr> <td> &#38;nbsp;ER-TA-30K/10</td> <td> &#38;nbsp;30,000 Pound Capacity For 10 Foot Length</td> <td> 1449.00</td> </tr> <tr> <td> &#38;nbsp;ER-7W/6</td> <td> &#38;nbsp;7 Foot Width For 6 Foot Length</td> <td> &#38;nbsp;367.00</td> </tr> <tr> <td> &#38;nbsp;ER-7W/8</td> <td> &#38;nbsp;7 Foot Width For&#38;nbsp;8 Foot Length</td> <td> &#38;nbsp;563.00</td> </tr> <tr> <td> &#38;nbsp;ER-7W/10</td> <td> &#38;nbsp;7 Foot Width For&#38;nbsp;10 Foot Length</td> <td> &#38;nbsp;846.00</td> </tr> <tr> <td> &#38;nbsp;ER-FI</td> <td> &#38;nbsp;Foam Insulation</td> <td> &#38;nbsp;192.00</td> </tr> <tr> <td> ER-TL</td> <td> &#38;nbsp;Notch For Trailer Lock</td> <td> &#38;nbsp;111.00</td> </tr> <tr> <td> &#38;nbsp;ER-SPO</td> <td> &#38;nbsp;Shallow Pit Option (minimum depth 24&#38;quot;)</td> <td> &#38;nbsp;101.00</td> </tr> <tr> <td> &#38;nbsp;ER-BE</td> <td> &#38;nbsp;Bumper Extension For Low Docks</td> <td> &#38;nbsp;85</td> </tr> </tbody> </table> <p> <br /> &#38;nbsp;</p>Manufacturer: ]]> Model #: ER-RU-SCB]]> Price: $4866.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/truck-actuated-loading-dock-levelers-pit-p-4375.html Mon, 21 Feb 2011 19:39:53 GMT
78"Width Lo-Dock Levelers for Refrigerated Trailers-25,000lb Cap Dock Levelers http://www.easyrack.org/78width-dock-levelers-for-refrigerated-trailers-25000lb-cap-p-3239.html 78"Width Lo-Dock Levelers for Refrigerated Trailers-25,000lb Cap
]]><p><strong>78" Width Lo-Dock Levelers for Refrigerated Trailers - 25,000lb Capacity</strong> are the perfect choice when the original building did not include pit mounted levelers. Now without expensive dock alterations, you can raise the height of your present dock as much as 11". Lo-dock levelers can easily be installed on any concrete dock without welding or modifications. This unit provides for fork truck traffic that is from 5" below dock level to 5" above dock level. The product includes molded bumpers and a mechanical spring operation that takes the heavy work out of the lifting. Refrigerated lip is optional. The patented design assures that the leveler is positioned exactly for correct use every time. <font color="#0000FF">See table for specs.</font></p> <table width="80%" border="1" align="center"> <tr> <td width="24%"><div align="center"><strong>RAMP LENGTH</strong></div></td> <td width="27%"><div align="center"> WIDTH</div></td> <td width="27%"><div align="center">OVERALL WIDTH</div></td> <td width="22%"><div align="center">RAMP UP</div></td> </tr> <tr> <td><div align="center"><strong>30"</strong></div></td> <td><div align="center">72"</div></td> <td><div align="center">94"</div></td> <td><div align="center">3</div></td> </tr> <tr> <td><div align="center"><strong>48"</strong></div></td> <td><div align="center">72"</div></td> <td><div align="center">94"</div></td> <td><div align="center">5</div></td> </tr> <tr> <td height="25"><div align="center"><strong>51"</strong></div></td> <td><div align="center">72"</div></td> <td><div align="center">94"</div></td> <td><div align="center">7</div></td> </tr> <tr> <td><div align="center"><strong>61"</strong></div></td> <td><div align="center">72"</div></td> <td><div align="center">94"</div></td> <td><div align="center">9</div></td> </tr> </table> <p><font color="#FF0000">Available options are Set of 3" Channel Curbs Welded to 30"L Lo-Dock, Set of 3" Channel Curbs Welded to 48"L Lo-Dock, Set of 3" Channel Curbs Welded to 51"L Lo-Dock, Set of 3" Channel Curbs Welded to 61"L Lo-Dock and Fasteners for Mounting Lo-Dock.</font><strong></strong><em><em><strong><br> *Please select appropriate options when ordering.</strong></em></em></p>Manufacturer: ]]> Model #: B25LD78-#R]]> Price: $2197.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/78width-dock-levelers-for-refrigerated-trailers-25000lb-cap-p-3239.html Wed, 20 Aug 2008 18:03:52 GMT
72"Width Lo-Dock Levelers for Refrigerated Trailers-25,000lb Cap Dock Levelers http://www.easyrack.org/72width-dock-levelers-for-refrigerated-trailers-25000lb-cap-p-3238.html 72"Width Lo-Dock Levelers for Refrigerated Trailers-25,000lb Cap
]]><p><strong>72" Width Lo-Dock Levelers for Refrigerated Trailers - 25,000lb Capacity</strong> are the perfect choice when the original building did not include pit mounted levelers. Now without expensive dock alterations, you can raise the height of your present dock as much as 11". Lo-dock levelers can easily be installed on any concrete dock without welding or modifications. This unit provides for fork truck traffic that is from 5" below dock level to 5" above dock level. The product includes molded bumpers and a mechanical spring operation that takes the heavy work out of the lifting. Refrigerated lip is optional. The patented design assures that the leveler is positioned exactly for correct use every time. <font color="#0000FF">See table for specs.</font></p> <table width="80%" border="1" align="center"> <tr> <td width="24%"><div align="center"><strong>RAMP LENGTH</strong></div></td> <td width="27%"><div align="center"> WIDTH</div></td> <td width="27%"><div align="center">OVERALL WIDTH</div></td> <td width="22%"><div align="center">RAMP UP</div></td> </tr> <tr> <td><div align="center"><strong>30"</strong></div></td> <td><div align="center">72"</div></td> <td><div align="center">94"</div></td> <td><div align="center">3</div></td> </tr> <tr> <td><div align="center"><strong>48"</strong></div></td> <td><div align="center">72"</div></td> <td><div align="center">94"</div></td> <td><div align="center">5</div></td> </tr> <tr> <td height="25"><div align="center"><strong>51"</strong></div></td> <td><div align="center">72"</div></td> <td><div align="center">94"</div></td> <td><div align="center">7</div></td> </tr> <tr> <td><div align="center"><strong>61"</strong></div></td> <td><div align="center">72"</div></td> <td><div align="center">94"</div></td> <td><div align="center">9</div></td> </tr> </table> <p><font color="#FF0000">Available options are Set of 3" Channel Curbs Welded to 30"L Lo-Dock, Set of 3" Channel Curbs Welded to 48"L Lo-Dock, Set of 3" Channel Curbs Welded to 51"L Lo-Dock, Set of 3" Channel Curbs Welded to 61"L Lo-Dock and Fasteners for Mounting Lo-Dock.</font><strong></strong><em><em><strong><br> *Please select appropriate options when ordering.</strong></em></em></p>Manufacturer: ]]> Model #: B25LD72-#R]]> Price: $2114.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/72width-dock-levelers-for-refrigerated-trailers-25000lb-cap-p-3238.html Wed, 20 Aug 2008 17:53:37 GMT
78"Width Lo-Dock Levelers for Refrigerated Trailers-20,000lb Cap Dock Levelers http://www.easyrack.org/78width-dock-levelers-for-refrigerated-trailers-20000lb-cap-p-3237.html 78"Width Lo-Dock Levelers for Refrigerated Trailers-20,000lb Cap
]]><p><strong>78" Width Lo-Dock Levelers for Refrigerated Trailers - 20,000lb Capacity</strong> are the perfect choice when the original building did not include pit mounted levelers. Now without expensive dock alterations, you can raise the height of your present dock as much as 11". Lo-dock levelers can easily be installed on any concrete dock without welding or modifications. This unit provides for fork truck traffic that is from 5" below dock level to 5" above dock level. The product includes molded bumpers and a mechanical spring operation that takes the heavy work out of the lifting. Refrigerated lip is optional. The patented design assures that the leveler is positioned exactly for correct use every time. <font color="#0000FF">See table for specs.</font></p> <table width="80%" border="1" align="center"> <tr> <td width="24%"><div align="center"><strong>RAMP LENGTH</strong></div></td> <td width="27%"><div align="center"> WIDTH</div></td> <td width="27%"><div align="center">OVERALL WIDTH</div></td> <td width="22%"><div align="center">RAMP UP</div></td> </tr> <tr> <td><div align="center"><strong>30"</strong></div></td> <td><div align="center">72"</div></td> <td><div align="center">94"</div></td> <td><div align="center">3</div></td> </tr> <tr> <td><div align="center"><strong>48"</strong></div></td> <td><div align="center">72"</div></td> <td><div align="center">94"</div></td> <td><div align="center">5</div></td> </tr> <tr> <td height="25"><div align="center"><strong>51"</strong></div></td> <td><div align="center">72"</div></td> <td><div align="center">94"</div></td> <td><div align="center">7</div></td> </tr> <tr> <td><div align="center"><strong>61"</strong></div></td> <td><div align="center">72"</div></td> <td><div align="center">94"</div></td> <td><div align="center">9</div></td> </tr> </table> <p><font color="#FF0000">Available options are Set of 3" Channel Curbs Welded to 30"L Lo-Dock, Set of 3" Channel Curbs Welded to 48"L Lo-Dock, Set of 3" Channel Curbs Welded to 51"L Lo-Dock, Set of 3" Channel Curbs Welded to 61"L Lo-Dock and Fasteners for Mounting Lo-Dock.</font><strong></strong><em><em><strong><br> *Please select appropriate options when ordering.</strong></em></em></p>Manufacturer: ]]> Model #: B20LD78-#R]]> Price: $2115.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/78width-dock-levelers-for-refrigerated-trailers-20000lb-cap-p-3237.html Wed, 20 Aug 2008 17:44:54 GMT
72"Width Lo-Dock Levelers for Refrigerated Trailers-20,000lb Cap Dock Levelers http://www.easyrack.org/72width-dock-levelers-for-refrigerated-trailers-20000lb-cap-p-3236.html 72"Width Lo-Dock Levelers for Refrigerated Trailers-20,000lb Cap
]]><p><strong>72" Width Lo-Dock Levelers for Refrigerated Trailers - 20,000lb Capacity</strong> are the perfect choice when the original building did not include pit mounted levelers. Now without expensive dock alterations, you can raise the height of your present dock as much as 11". Lo-dock levelers can easily be installed on any concrete dock without welding or modifications. This unit provides for fork truck traffic that is from 5" below dock level to 5" above dock level. The product includes molded bumpers and a mechanical spring operation that takes the heavy work out of the lifting. Refrigerated lip is optional. The patented design assures that the leveler is positioned exactly for correct use every time. <font color="#0000FF">See table for specs.</font></p> <table width="80%" border="1" align="center"> <tr> <td width="24%"><div align="center"><strong>RAMP LENGTH</strong></div></td> <td width="27%"><div align="center"> WIDTH</div></td> <td width="27%"><div align="center">OVERALL WIDTH</div></td> <td width="22%"><div align="center">RAMP UP</div></td> </tr> <tr> <td><div align="center"><strong>30"</strong></div></td> <td><div align="center">72"</div></td> <td><div align="center">94"</div></td> <td><div align="center">3</div></td> </tr> <tr> <td><div align="center"><strong>48"</strong></div></td> <td><div align="center">72"</div></td> <td><div align="center">94"</div></td> <td><div align="center">5</div></td> </tr> <tr> <td height="25"><div align="center"><strong>51"</strong></div></td> <td><div align="center">72"</div></td> <td><div align="center">94"</div></td> <td><div align="center">7</div></td> </tr> <tr> <td><div align="center"><strong>61"</strong></div></td> <td><div align="center">72"</div></td> <td><div align="center">94"</div></td> <td><div align="center">9</div></td> </tr> </table> <p><font color="#FF0000">Available options are Set of 3" Channel Curbs Welded to 30"L Lo-Dock, Set of 3" Channel Curbs Welded to 48"L Lo-Dock, Set of 3" Channel Curbs Welded to 51"L Lo-Dock, Set of 3" Channel Curbs Welded to 61"L Lo-Dock and Fasteners for Mounting Lo-Dock.</font><strong></strong><em><em><strong><br> *Please select appropriate options when ordering.</strong></em></em></p>Manufacturer: ]]> Model #: B20LD72-#R]]> Price: $2039.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/72width-dock-levelers-for-refrigerated-trailers-20000lb-cap-p-3236.html Wed, 20 Aug 2008 17:25:43 GMT
78" Width Lo-Dock Levelers - 25,000lb Capacity Dock Levelers http://www.easyrack.org/width-dock-levelers-25000lb-capacity-p-3235.html 78" Width Lo-Dock Levelers - 25,000lb Capacity
]]><p><strong>78" Width Lo-Dock Levelers - 25,000lb Capacity</strong> are the perfect choice when the original building did not include pit mounted levelers. Now without expensive dock alterations, you can raise the height of your present dock as much as 11". Lo-dock levelers can easily be installed on any concrete dock without welding or modifications. This unit provides for fork truck traffic that is from 5" below dock level to 5" above dock level. The product includes molded bumpers and a mechanical spring operation that takes the heavy work out of the lifting. The patented design assures that the leveler is positioned exactly for correct use every time. <font color="#0000FF">See table for specs.</font></p> <table width="80%" border="1" align="center"> <tr> <td width="24%"><div align="center"><strong>RAMP LENGTH</strong></div></td> <td width="27%"><div align="center"> WIDTH</div></td> <td width="27%"><div align="center">OVERALL WIDTH</div></td> <td width="22%"><div align="center">RAMP UP</div></td> </tr> <tr> <td><div align="center"><strong>30"</strong></div></td> <td><div align="center">72"</div></td> <td><div align="center">94"</div></td> <td><div align="center">3</div></td> </tr> <tr> <td><div align="center"><strong>48"</strong></div></td> <td><div align="center">72"</div></td> <td><div align="center">94"</div></td> <td><div align="center">5</div></td> </tr> <tr> <td height="25"><div align="center"><strong>51"</strong></div></td> <td><div align="center">72"</div></td> <td><div align="center">94"</div></td> <td><div align="center">7</div></td> </tr> <tr> <td><div align="center"><strong>61"</strong></div></td> <td><div align="center">72"</div></td> <td><div align="center">94"</div></td> <td><div align="center">9</div></td> </tr> </table> <p><font color="#FF0000">Available options are Set of 3" Channel Curbs Welded to 30"L Lo-Dock, Set of 3" Channel Curbs Welded to 48"L Lo-Dock, Set of 3" Channel Curbs Welded to 51"L Lo-Dock, Set of 3" Channel Curbs Welded to 61"L Lo-Dock and Fasteners for Mounting Lo-Dock.</font><em><strong><br> *Please select appropriate options when ordering.</strong></em></p>Manufacturer: ]]> Model #: B25LD78-#]]> Price: $1989.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/width-dock-levelers-25000lb-capacity-p-3235.html Wed, 20 Aug 2008 17:08:25 GMT
78" Width Lo-Dock Levelers - 20,000lb Capacity Dock Levelers http://www.easyrack.org/width-dock-levelers-20000lb-capacity-p-3233.html 78" Width Lo-Dock Levelers - 20,000lb Capacity
]]><p><strong>78" Width Lo-Dock Levelers - 20,000lb Capacity</strong> are the perfect choice when the original building did not include pit mounted levelers. Now without expensive dock alterations, you can raise the height of your present dock as much as 11". Lo-dock levelers can easily be installed on any concrete dock without welding or modifications. This unit provides for fork truck traffic that is from 5" below dock level to 5" above dock level. The product includes molded bumpers and a mechanical spring operation that takes the heavy work out of the lifting. The patented design assures that the leveler is positioned exactly for correct use every time. <font color="#0000FF">See table for specs.</font></p> <table width="80%" border="1" align="center"> <tr> <td width="24%"><div align="center"><strong>RAMP LENGTH</strong></div></td> <td width="27%"><div align="center"> WIDTH</div></td> <td width="27%"><div align="center">OVERALL WIDTH</div></td> <td width="22%"><div align="center">RAMP UP</div></td> </tr> <tr> <td><div align="center"><strong>30"</strong></div></td> <td><div align="center">72"</div></td> <td><div align="center">94"</div></td> <td><div align="center">3</div></td> </tr> <tr> <td><div align="center"><strong>48"</strong></div></td> <td><div align="center">72"</div></td> <td><div align="center">94"</div></td> <td><div align="center">5</div></td> </tr> <tr> <td height="25"><div align="center"><strong>51"</strong></div></td> <td><div align="center">72"</div></td> <td><div align="center">94"</div></td> <td><div align="center">7</div></td> </tr> <tr> <td><div align="center"><strong>61"</strong></div></td> <td><div align="center">72"</div></td> <td><div align="center">94"</div></td> <td><div align="center">9</div></td> </tr> </table> <p><font color="#FF0000">Available options are Set of 3" Channel Curbs Welded to 30"L Lo-Dock, Set of 3" Channel Curbs Welded to 48"L Lo-Dock, Set of 3" Channel Curbs Welded to 51"L Lo-Dock, Set of 3" Channel Curbs Welded to 61"L Lo-Dock and Fasteners for Mounting Lo-Dock.</font><em><strong><br> *Please select appropriate options when ordering.</strong></em></p>Manufacturer: ]]> Model #: B20LD78-#]]> Price: $1860.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/width-dock-levelers-20000lb-capacity-p-3233.html Wed, 20 Aug 2008 16:47:19 GMT
72" Width Lo-Dock Levelers - 20,000lb Capacity Dock Levelers http://www.easyrack.org/width-dock-levelers-20000lb-capacity-p-3232.html 72" Width Lo-Dock Levelers - 20,000lb Capacity
]]><p> <strong>72&#38;quot; Width Lo-Dock Levelers - 20,000lb Capacity</strong> are the perfect choice when the original building did not include pit mounted levelers. Now without expensive dock alterations, you can raise the height of your present dock as much as 11&#38;quot;. Lo-dock levelers can easily be installed on any concrete dock without welding or modifications. This unit provides for fork truck traffic that is from 5&#38;quot; below dock level to 5&#38;quot; above dock level. The product includes molded bumpers and a mechanical spring operation that takes the heavy work out of the lifting. The patented design assures that the leveler is positioned exactly for correct use every time. <font color="#0000ff">See table for specs.</font></p> <table align="center" border="1" width="80%"> <tbody> <tr> <td width="24%"> <div align="center"> <strong>RAMP LENGTH</strong></div> </td> <td width="27%"> <div align="center"> WIDTH</div> </td> <td width="27%"> <div align="center"> OVERALL WIDTH</div> </td> <td width="22%"> <div align="center"> RAMP UP</div> </td> </tr> <tr> <td> <div align="center"> <strong>30&#38;quot;</strong></div> </td> <td> <div align="center"> 72&#38;quot;</div> </td> <td> <div align="center"> 94&#38;quot;</div> </td> <td> <div align="center"> 3</div> </td> </tr> <tr> <td> <div align="center"> <strong>48&#38;quot;</strong></div> </td> <td> <div align="center"> 72&#38;quot;</div> </td> <td> <div align="center"> 94&#38;quot;</div> </td> <td> <div align="center"> 5</div> </td> </tr> <tr> <td height="25"> <div align="center"> <strong>51&#38;quot;</strong></div> </td> <td> <div align="center"> 72&#38;quot;</div> </td> <td> <div align="center"> 94&#38;quot;</div> </td> <td> <div align="center"> 7</div> </td> </tr> <tr> <td> <div align="center"> <strong>61&#38;quot;</strong></div> </td> <td> <div align="center"> 72&#38;quot;</div> </td> <td> <div align="center"> 94&#38;quot;</div> </td> <td> <div align="center"> 9</div> </td> </tr> </tbody> </table> <p> <font color="#ff0000">Available options are Set of 3&#38;quot; Channel Curbs Welded to 30&#38;quot;L Lo-Dock, Set of 3&#38;quot; Channel Curbs Welded to 48&#38;quot;L Lo-Dock, Set of 3&#38;quot; Channel Curbs Welded to 51&#38;quot;L Lo-Dock, Set of 3&#38;quot; Channel Curbs Welded to 61&#38;quot;L Lo-Dock and Fasteners for Mounting Lo-Dock.</font><em><strong><br /> *Please select appropriate options when ordering.</strong></em></p>Manufacturer: ]]> Model #: B20LD72-#]]> Price: $1796.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/width-dock-levelers-20000lb-capacity-p-3232.html Wed, 20 Aug 2008 16:30:50 GMT
EZ-Pull Edge of Dock Levelers for Refrigerated Trailers-25,000lb Dock Levelers http://www.easyrack.org/pull-edge-dock-levelers-for-refrigerated-trailers-25000lb-p-3231.html EZ-Pull Edge of Dock Levelers for Refrigerated Trailers-25,000lb
]]><p><strong>EZ-Pull Edge of Dock Levelers for Refrigerated Trailers - 25,000lb Capacity</strong> are the perfect choice when the original building did not include pit mounted levelers. Fast and easy to operate, the edge of dock leveler is positioned by lifting a self-storing handle and pulling the handle to the dock floor. The latch assembly activates the lip forward to the floor of the trailer as the handle is lifted. When released, the handle automatically returns to a stored position. The proper dock height for refrigerated equipment is 55", the refrigerated lip is optional. The product includes molded bumpers and a mechanical spring operation that takes the heavy work out of the lifting. The patented design assures that the leveler is positioned exactly for correct use every time. <font color="#0000FF">See table for specs.</font></p> <table width="80%" border="1" align="center"> <tr> <td width="10%"><div align="center">USABLE WIDTH</div></td> <td width="10%"><div align="center">OVERALL WIDTH</div></td> <td width="13%"><div align="center">LIP LENGTH</div></td> <td width="34%"><div align="center">SPAN</div></td> </tr> <tr> <td><div align="center">66"</div></td> <td><div align="center">88"</div></td> <td><div align="center">15"</div></td> <td><div align="center">27.75</div></td> </tr> <tr> <td><div align="center">72"</div></td> <td><div align="center">94"</div></td> <td><div align="center">15"</div></td> <td><div align="center">27.75</div></td> </tr> <tr> <td><div align="center">78"</div></td> <td><div align="center">100"</div></td> <td><div align="center">15"</div></td> <td><div align="center">27.75</div></td> </tr> </table> <p><font color="#FF0000">Available accessories are 12" Long Beveled Approach Plate 120" Wide, 24" Long Beveled Approach Plate 120" Wide, Fastener Kit for Approach Plate, Fastener Kit for Installation of Leveler and Fastener Kit for Installation of Leveler and Approach Plate. Available replacement parts are Handle, Spring Assembly, Molded Bumper (1), and Molded Bumper with Steel Base (1).</font><font color="#00FFFF"><br> </font><em><strong>*Please select appropriate options when ordering.</strong></em></p>Manufacturer: ]]> Model #: B25EP-uw-R]]> Price: $1194.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/pull-edge-dock-levelers-for-refrigerated-trailers-25000lb-p-3231.html Wed, 20 Aug 2008 00:26:59 GMT
EZ-Pull Edge of Dock Levelers for Refrigerated Trailers-20,000lb Dock Levelers http://www.easyrack.org/pull-edge-dock-levelers-for-refrigerated-trailers-20000lb-p-3230.html EZ-Pull Edge of Dock Levelers for Refrigerated Trailers-20,000lb
]]><p><strong>EZ-Pull Edge of Dock Levelers for Refrigerated Trailers - 20,000lb Capacity</strong> are the perfect choice when the original building did not include pit mounted levelers. Fast and easy to operate, the edge of dock leveler is positioned by lifting a self-storing handle and pulling the handle to the dock floor. The latch assembly activates the lip forward to the floor of the trailer as the handle is lifted. When released, the handle automatically returns to a stored position. The proper dock height for refrigerated equipment is 55", the refrigerated lip is optional. The product includes molded bumpers and a mechanical spring operation that takes the heavy work out of the lifting. The patented design assures that the leveler is positioned exactly for correct use every time. <font color="#0000FF">See table for specs.</font></p> <table width="80%" border="1" align="center"> <tr> <td width="10%"><div align="center">USABLE WIDTH</div></td> <td width="10%"><div align="center">OVERALL WIDTH</div></td> <td width="13%"><div align="center">LIP LENGTH</div></td> <td width="34%"><div align="center">SPAN</div></td> </tr> <tr> <td><div align="center">66"</div></td> <td><div align="center">88"</div></td> <td><div align="center">15"</div></td> <td><div align="center">27.75</div></td> </tr> <tr> <td><div align="center">72"</div></td> <td><div align="center">94"</div></td> <td><div align="center">15"</div></td> <td><div align="center">27.75</div></td> </tr> <tr> <td><div align="center">78"</div></td> <td><div align="center">100"</div></td> <td><div align="center">15"</div></td> <td><div align="center">27.75</div></td> </tr> </table> <p><font color="#FF0000">Available accessories are 12" Long Beveled Approach Plate 120" Wide, 24" Long Beveled Approach Plate 120" Wide, Fastener Kit for Approach Plate, Fastener Kit for Installation of Leveler and Fastener Kit for Installation of Leveler and Approach Plate. Available replacement parts are Handle, Spring Assembly, Molded Bumper (1), and Molded Bumper with Steel Base (1).</font><font color="#00FFFF"><br> </font><em><strong>*Please select appropriate options when ordering.</strong></em></p>Manufacturer: ]]> Model #: B20EP-uw-R]]> Price: $931.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/pull-edge-dock-levelers-for-refrigerated-trailers-20000lb-p-3230.html Wed, 20 Aug 2008 00:00:11 GMT
EZ-Pull Edge of Dock Levelers - 25,000lb Capacity Dock Levelers http://www.easyrack.org/pull-edge-dock-levelers-25000lb-capacity-p-3229.html EZ-Pull Edge of Dock Levelers - 25,000lb Capacity
]]><p> <strong>EZ-Pull Edge of Dock Levelers - 25,000lb Capacity</strong> are the perfect choice when the original building did not include pit mounted levelers. Fast and easy to operate, the edge of dock leveler is positioned by lifting a self-storing handle and pulling the handle to the dock floor. The latch assembly activates the lip forward to the floor of the trailer as the handle is lifted. When released, the handle automatically returns to a stored position. The optimum dock height for conventional trailers is 51&#38;quot;, this unit provides for fork truck traffic that is from 5&#38;quot; below dock level to 5&#38;quot; above dock level. The product includes molded bumpers and a mechanical spring operation that takes the heavy work out of the lifting. The patented design assures that the leveler is positioned exactly for correct use every time. <font color="#0000ff">See table for specs.</font></p> <table align="center" border="1" width="80%"> <tbody> <tr> <td width="10%"> <div align="center"> USABLE WIDTH</div> </td> <td width="10%"> <div align="center"> OVERALL WIDTH</div> </td> <td width="13%"> <div align="center"> LIP LENGTH</div> </td> <td width="34%"> <div align="center"> SPAN</div> </td> </tr> <tr> <td> <div align="center"> 66&#38;quot;</div> </td> <td> <div align="center"> 88&#38;quot;</div> </td> <td> <div align="center"> 15&#38;quot;</div> </td> <td> <div align="center"> 27.75</div> </td> </tr> <tr> <td> <div align="center"> 72&#38;quot;</div> </td> <td> <div align="center"> 94&#38;quot;</div> </td> <td> <div align="center"> 15&#38;quot;</div> </td> <td> <div align="center"> 27.75</div> </td> </tr> <tr> <td> <div align="center"> 78&#38;quot;</div> </td> <td> <div align="center"> 100&#38;quot;</div> </td> <td> <div align="center"> 15&#38;quot;</div> </td> <td> <div align="center"> 27.75</div> </td> </tr> </tbody> </table> <p> <font color="#ff0000">Available accessories are 12&#38;quot; Long Beveled Approach Plate 120&#38;quot; Wide, 24&#38;quot; Long Beveled Approach Plate 120&#38;quot; Wide, Fastener Kit for Approach Plate, Fastener Kit for Installation of Leveler and Fastener Kit for Installation of Leveler and Approach Plate. Available replacement parts are Handle, Spring Assembly, Molded Bumper (1), and Molded Bumper with Steel Base (1).</font><font color="#00ffff"><br /> </font><em><strong>*Please select appropriate options when ordering.</strong></em></p>Manufacturer: ]]> Model #: B25EP-uw]]> Price: $1071.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/pull-edge-dock-levelers-25000lb-capacity-p-3229.html Tue, 19 Aug 2008 22:07:12 GMT
EZ-Pull Edge of Dock Levelers - 20,000lb Capacity Dock Levelers http://www.easyrack.org/pull-edge-dock-levelers-20000lb-capacity-p-3228.html EZ-Pull Edge of Dock Levelers - 20,000lb Capacity
]]><p><strong>EZ-Pull Edge of Dock Levelers - 20,000lb Capacity</strong> are the perfect choice when the original building did not include pit mounted levelers. Fast and easy to operate, the edge of dock leveler is positioned by lifting a self-storing handle and pulling the handle to the dock floor. The latch assembly activates the lip forward to the floor of the trailer as the handle is lifted. When released, the handle automatically returns to a stored position. The optimum dock height for conventional trailers is 51", this unit provides for fork truck traffic that is from 5" below dock level to 5" above dock level. The product includes molded bumpers and a mechanical spring operation that takes the heavy work out of the lifting. The patented design assures that the leveler is positioned exactly for correct use every time. <font color="#0000FF">See table for specs.</font></p> <table width="80%" border="1" align="center"> <tr> <td width="10%"><div align="center">USABLE WIDTH</div></td> <td width="10%"><div align="center">OVERALL WIDTH</div></td> <td width="13%"><div align="center">LIP LENGTH</div></td> <td width="34%"><div align="center">SPAN</div></td> </tr> <tr> <td><div align="center">66"</div></td> <td><div align="center">88"</div></td> <td><div align="center">15"</div></td> <td><div align="center">27.75</div></td> </tr> <tr> <td><div align="center">72"</div></td> <td><div align="center">94"</div></td> <td><div align="center">15"</div></td> <td><div align="center">27.75</div></td> </tr> <tr> <td><div align="center">78"</div></td> <td><div align="center">100"</div></td> <td><div align="center">15"</div></td> <td><div align="center">27.75</div></td> </tr> </table> <p><font color="#FF0000">Available accessories are 12" Long Beveled Approach Plate 120" Wide, 24" Long Beveled Approach Plate 120" Wide, Fastener Kit for Approach Plate, Fastener Kit for Installation of Leveler and Fastener Kit for Installation of Leveler and Approach Plate. Available replacement parts are Handle, Spring Assembly, Molded Bumper (1), and Molded Bumper with Steel Base (1).</font><font color="#00FFFF"><br> </font><em><strong>*Please select appropriate options when ordering.</strong></em></p>Manufacturer: ]]> Model #: B20EP-uw]]> Price: $931.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/pull-edge-dock-levelers-20000lb-capacity-p-3228.html Tue, 19 Aug 2008 21:34:44 GMT
Approach Plates for Edge-O-Dock Levelers Dock Levelers http://www.easyrack.org/approach-plates-for-edge-dock-levelers-p-966.html <p> <b>Approach Plates for Edge-O-Dock levelers</b> are 1/4&#38;quot; Thick x 12&#38;quot;Lx96&#38;quot;W and are available with or without a beveled edge. <b>Hydraulic Hand Pump Edge-O-Dock levelers</b> systems are used to lift the leveler and extend the lip. The lip operator rotates the relief valve allowing the deck to descend down and rest upon the trailer. Unit comes complete with hand pump, wall-mount brackets, cylinder, 15 feet of hydraulic line and oil. The Edge-O-Docklevelers permanently attach to the face of the dock. These are recommended for docks at least 48&#38;rdquo; high. Concrete recess is not required. <b>Electric Hydraulic Edge-O-Dock levelers</b> is the easiest to operate. After the truck is backed against the dock, push and hold the control button. The leveler raises and the lip will extend and rest on the truck bed. The unit is operated by a &#38;frac34; HP. 11/220V, single phase motor pre-wired to 10V. Unit comes complete with motor, pump, control box, cylinder, lines and oil. The Edge-O-Docklevelers permanently attach to the face of the dock. These are recommended for docks at least 48&#38;rdquo; high. Concrete recess is not required. <b>Mechanical Edge-O-Docklevers</b> are operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically. The Edge-O-Docklevelers permanently attach to the face of the dock. These are recommended for docks at least 48&#38;rdquo; high. Concrete recess is not required.</p>Manufacturer: ]]> Model #: AP-x]]> Price: $175.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/approach-plates-for-edge-dock-levelers-p-966.html Wed, 12 Sep 2007 21:30:29 GMT
Approach Ramps for Edge-O-Dock Levelers Dock Levelers http://www.easyrack.org/approach-ramps-for-edge-dock-levelers-p-965.html Approach Ramps for Edge-O-Dock Levelers
]]><p> <b>Approach Ramps for Edge-O-Dock levelers</b> are available in 96&#38;quot;Wx12&#38;quot;Lx2&#38;quot;H and 96&#38;quot;Wx24&#38;quot;Lx4&#38;quot;H. <b>Hydraulic Hand Pump Edge-O-Docklevers</b> systems are used to lift the leveler and extend the lip. The lip operator rotates the relief valve allowing the deck to descend down and rest upon the trailer. Unit comes complete with hand pump, wall-mount brackets, cylinder, 15 feet of hydraulic line and oil. The Edge-O-Dock levelers permanently attach to the face of the dock. These are recommended for docks at least 48&#38;rdquo; high. Concrete recess is not required. <b>Electric Hydraulic Edge-O-Dock Levelers</b> is the easiest to operate. After the truck is backed against the dock, push and hold the control button. The leveler raises and the lip will extend and rest on the truck bed. The unit is operated by a &#38;frac34; HP. 11/220V, single phase motor pre-wired to 10V. Unit comes complete with motor, pump, control box, cylinder, lines and oil. The Edge-O-Docklevelers permanently attach to the face of the dock. These are recommended for docks at least 48&#38;rdquo; high. Concrete recess is not required. <b>Mechanical Edge-O-Dock levelers</b> are operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically. The Edge-O-Docklevelers permanently attach to the face of the dock. These are recommended for docks at least 48&#38;rdquo; high. Concrete recess is not required.</p>Manufacturer: ]]> Model #: RAMP-l]]> Price: $296.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/approach-ramps-for-edge-dock-levelers-p-965.html Wed, 12 Sep 2007 21:26:17 GMT
Curb Edge for Edge-O-Dock Levelers Dock Levelers http://www.easyrack.org/curb-edge-for-edge-dock-levelers-p-964.html <p> <b>Curb Edge for Edge-O-Dock levelers</b> has a 6&#38;quot; channel and is 96&#38;quot; long. <b>Hydraulic Hand Pump Edge-O-Docklevers</b> systems are used to lift the leveler and extend the lip. The lip operator rotates the relief valve allowing the deck to descend down and rest upon the trailer. Unit comes complete with hand pump, wall-mount brackets, cylinder, 15 feet of hydraulic line and oil. The Edge-O-Docklevelers permanently attach to the face of the dock. These are recommended for docks at least 48&#38;rdquo; high. Concrete recess is not required. <b>Electric Hydraulic Edge-O-Dock levelers</b> is the easiest to operate. After the truck is backed against the dock, push and hold the control button. The leveler raises and the lip will extend and rest on the truck bed. The unit is operated by a &#38;frac34; HP. 11/220V, single phase motor pre-wired to 10V. Unit comes complete with motor, pump, control box, cylinder, lines and oil. The Edge-O-Docklevelers permanently attach to the face of the dock. These are recommended for docks at least 48&#38;rdquo; high. Concrete recess is not required. <b>Mechanical Edge-O-Docklevers</b> are operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically. The Edge-O-Docklevelers permanently attach to the face of the dock. These are recommended for docks at least 48&#38;rdquo; high. Concrete recess is not required.</p>Manufacturer: ]]> Model #: CE]]> Price: $169.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/curb-edge-for-edge-dock-levelers-p-964.html Wed, 12 Sep 2007 21:22:45 GMT
Conversion Kits for Edge-O-Dock Levelers Dock Levelers http://www.easyrack.org/conversion-kits-for-edge-dock-levelers-p-963.html Conversion Kits for Edge-O-Dock Levelers
]]><p> <b>Conversion Kits for Edge-O Loading Dock levelers. </b><b>Hydraulic Hand Pump Edge-O-Docklevers</b> systems are used to lift the leveler and extend the lip. The lip operator rotates the relief valve allowing the deck to descend down and rest upon the trailer. Unit comes complete with hand pump, wall-mount brackets, cylinder, 15 feet of hydraulic line and oil. The Edge-O-Docklevelers permanently attach to the face of the dock. These are recommended for docks at least 48&#38;rdquo; high. Concrete recess is not required. <b>Electric Hydraulic Edge-O-Docklevelers</b> is the easiest to operate. After the truck is backed against the dock, push and hold the control button. The leveler raises and the lip will extend and rest on the truck bed. The unit is operated by a &#38;frac34; HP. 11/220V, single phase motor pre-wired to 10V. Unit comes complete with motor, pump, control box, cylinder, lines and oil. The Edge-O-Docklevelers permanently attach to the face of the dock. These are recommended for docks at least 48&#38;rdquo; high. Concrete recess is not required. <b>Mechanical Edge-O-Docklevers</b> are operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically. The Edge-O-Docklevelers permanently attach to the face of the dock. These are recommended for docks at least 48&#38;rdquo; high. Concrete recess is not required. <b>Available in Mechanical Hook to Mechanical Handle, Mechanical to Hydraulic Hand Pump, Mechanical to Electric Hydraulic and Hydraulic Hand Pump to Electric Hydraulic.<br /> <i>*Please select appropriate option when ordering.</i> </b></p>Manufacturer: ]]> Model #: ]]> Price: $266.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/conversion-kits-for-edge-dock-levelers-p-963.html Wed, 12 Sep 2007 21:14:50 GMT
Replacement Rubber Bumper for Edge-O-Dock Leveler Dock Levelers http://www.easyrack.org/replacement-rubber-bumper-for-edge-dock-leveler-p-962.html <p> <b>Replacement Rubber Bumper for Edge-O-Dock leveler. </b><b>Hydraulic Hand Pump Edge-O-Docklevers</b> systems are used to lift the leveler and extend the lip. The lip operator rotates the relief valve allowing the deck to descend down and rest upon the trailer. Unit comes complete with hand pump, wall-mount brackets, cylinder, 15 feet of hydraulic line and oil. The Edge-O-Docklevelers permanently attach to the face of the dock. These are recommended for docks at least 48&#38;rdquo; high. Concrete recess is not required. <b>Electric Hydraulic Edge-O-Docklevelers</b> is the easiest to operate. After the truck is backed against the dock, push and hold the control button. The leveler raises and the lip will extend and rest on the truck bed. The unit is operated by a &#38;frac34; HP. 11/220V, single phase motor pre-wired to 10V. Unit comes complete with motor, pump, control box, cylinder, lines and oil. The Edge-O-Dock Loading Levelers permanently attach to the face of the dock. These are recommended for loading docks at least 48&#38;rdquo; high. Concrete recess is not required. <b>Mechanical Edge-O-Dock Levelers</b> are operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically. The Edge-O-Docklevelers permanently attach to the face of the dock. These are recommended for docks at least 48&#38;rdquo; high. Concrete recess is not required.</p>Manufacturer: ]]> Model #: RB]]> Price: $49.50
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/replacement-rubber-bumper-for-edge-dock-leveler-p-962.html Wed, 12 Sep 2007 21:13:13 GMT
Steel Bumber Box for Edge-O-Dock Leveler Dock Levelers http://www.easyrack.org/steel-bumber-box-for-edge-dock-leveler-p-961.html <p> <b>Steel Bumber Box for Edge-O-Dock leveler. </b><b>Hydraulic Hand Pump Edge-O-Docklevers</b> systems are used to lift the leveler and extend the lip. The lip operator rotates the relief valve allowing the deck to descend down and rest upon the trailer. Unit comes complete with hand pump, wall-mount brackets, cylinder, 15 feet of hydraulic line and oil. The Edge-O-Dock levelers permanently attach to the face of the dock. These are recommended for docks at least 48&#38;rdquo; high. Concrete recess is not required. <b>Electric Hydraulic Edge-O-Dock levelers</b> is the easiest to operate. After the truck is backed against the dock, push and hold the control button. The leveler raises and the lip will extend and rest on the truck bed. The unit is operated by a &#38;frac34; HP. 11/220V, single phase motor pre-wired to 10V. Unit comes complete with motor, pump, control box, cylinder, lines and oil. The Edge-O-Docklevelers permanently attach to the face of the dock. These are recommended for docks at least 48&#38;rdquo; high. Concrete recess is not required. <b>Mechanical Edge-O-Docklevers</b> are operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically. The Edge-O-Dock levelers permanently attach to the face of the dock. These are recommended for docks at least 48&#38;rdquo; high. Concrete recess is not required.</p>Manufacturer: ]]> Model #: BB]]> Price: $235.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/steel-bumber-box-for-edge-dock-leveler-p-961.html Wed, 12 Sep 2007 21:09:38 GMT
Pulling Hook Handle for Mechanical Edge-O-Loading Dock Levelers Dock Levelers http://www.easyrack.org/pulling-hook-handle-for-mechanical-edge-loading-dock-levelers-p-960.html <p> <b>Pulling Hook/Actuation Handle for Mechanical Edge-O-Dock levelers.</b> The <b>Pulling Hook</b> is the old style, while the <b>Actuation Handle</b> is the new style available. <b>Mechanical Edge-O-Dock Levelers</b> are operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically. The Edge-O-Dock Loading Levelers permanently attach to the face of the dock. These are recommended for docks at least 48&#38;rdquo; high. Concrete recess is not required.</p>Manufacturer: ]]> Model #: FM-HOOK]]> Price: $36.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/pulling-hook-handle-for-mechanical-edge-loading-dock-levelers-p-960.html Wed, 12 Sep 2007 21:02:15 GMT
Electric Hydraulic Loading Dock Levelers Dock Levelers http://www.easyrack.org/electric-hydraulic-loading-dock-levelers-p-958.html <p> <b>Electric Interlock for Electric Hydraulic Loading Dock levelers &#38;amp; Trailer Restraint. Electric Hydraulic Dock Levelers</b> have a state-of-the-art hydraulic design with simple operation at the push of a button. The <b>Electric Hydraulic Dock Leveler</b> is ideal for high usage dock areas. This is an easy to operate unit. Operator pushes and holds the &#38;ldquo;raise&#38;rdquo; button which activates the hydraulic pump and raises the deck. When the deck reaches the raised position the lip automatically extends. The operator releases the &#38;ldquo;raise&#38;rdquo; button and deck descends to rest on trailer. Control box includes red emergency stop button standard. When the truck pulls away, the deck descends to full down position, trips the limit switch and returns automatically to the level support cross traffic position. <font color="#0000ff">Trailer Restraint sold sepereately.</font></p>Manufacturer: ]]> Model #: EH-TL]]> Price: $684.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/electric-hydraulic-loading-dock-levelers-p-958.html Wed, 12 Sep 2007 20:56:08 GMT
Lip Extend Button for Electric Hydraulic Dock Levelers Dock Levelers http://www.easyrack.org/lip-extend-button-for-electric-hydraulic-dock-levelers-p-957.html Lip Extend Button for Electric Hydraulic Dock Levelers
]]><b>Lip Extend Button for Electric Hydraulic Dock levelers. Electric Hydraulic Docklevers</B> have a state-of-the-art hydraulic design with simple operation at the push of a button. The <B>Electric Hydraulic Dock leveler</B> is ideal for high usage dock areas. This is an easy to operate unit. Operator pushes and holds the “raise” button which activates the hydraulic pump and raises the deck. When the deck reaches the raised position the lip automatically extends. The operator releases the “raise” button and deck descends to rest on trailer. Control box includes red emergency stop button standard. When the truck pulls away, the deck descends to full down position, trips the limit switch and returns automatically to the level support cross traffic position.Manufacturer: ]]> Model #: LIP-EX]]> Price: $234.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/lip-extend-button-for-electric-hydraulic-dock-levelers-p-957.html Wed, 12 Sep 2007 20:50:14 GMT
Cold Weather Oil for Electric Hydraulic Dock Levelers Dock Levelers http://www.easyrack.org/cold-weather-oil-for-electric-hydraulic-dock-levelers-p-956.html <b>Cold Weather Oil for Electric Hydraulic Dock levelers</b> are good to -10º weather. <B> Electric Hydraulic Docklevers</B> have a state-of-the-art hydraulic design with simple operation at the push of a button. The <B>Electric Hydraulic Dock leveler</B> is ideal for high usage dock areas. This is an easy to operate unit. Operator pushes and holds the “raise” button which activates the hydraulic pump and raises the deck. When the deck reaches the raised position the lip automatically extends. The operator releases the “raise” button and deck descends to rest on trailer. Control box includes red emergency stop button standard. When the truck pulls away, the deck descends to full down position, trips the limit switch and returns automatically to the level support cross traffic position.Manufacturer: ]]> Model #: CWO]]> Price: $63.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/cold-weather-oil-for-electric-hydraulic-dock-levelers-p-956.html Wed, 12 Sep 2007 20:40:44 GMT
Steel Shell Installation for Dock Levelers Dock Levelers http://www.easyrack.org/steel-shell-installation-for-dock-levelers-p-955.html <p> <b>Steel Shell for Pour in Place Installation for Mechanical &#38;amp; Electric Hydraulic Dock levelers. Mechanical Docklevers </b> are engineered and designed for minimum maintenance. Make loading and unloading easy with this rugged dockleveler. This system features a pull chain operation.<b> Electric Hydraulic Dock Dock Levelers</b> have a state-of-the-art hydraulic design with simple operation at the push of a button. The <b>Electric Hydraulic Dock Levelers</b> is ideal for high usage dock areas. This is an easy to operate unit. Operator pushes and holds the &#38;ldquo;raise&#38;rdquo; button which activates the hydraulic pump and raises the deck. When the deck reaches the raised position the lip automatically extends. The operator releases the &#38;ldquo;raise&#38;rdquo; button and deck descends to rest on trailer. Control box includes red emergency stop button standard. When the truck pulls away, the deck descends to full down position, trips the limit switch and returns automatically to the level support cross traffic position.</p>Manufacturer: ]]> Model #: SS/wl]]> Price: $627.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/steel-shell-installation-for-dock-levelers-p-955.html Wed, 12 Sep 2007 20:40:09 GMT
Leg Option for Electric Hydraulic &#38; Mechanical Dock Levelers Dock Levelers http://www.easyrack.org/leg-option-for-electric-hydraulic-mechanical-dock-levelers-p-954.html <p> <b>Leg Option for Electric Hydraulic &#38;amp; Mechanical Docklevelers</b> is for in front of dock placement. <b>Mechanical Dock Levelers </b>are engineered and designed for minimum maintenance. Make loading and unloading easy with this rugged dockleveler. This system features a pull chain operation.<b> Electric Hydraulic Docklevers</b> have a state-of-the-art hydraulic design with simple operation at the push of a button. The <b>Electric Hydraulic Dock leveler</b> is ideal for high usage dock areas. This is an easy to operate unit. Operator pushes and holds the &#38;ldquo;raise&#38;rdquo; button which activates the hydraulic pump and raises the deck. When the deck reaches the raised position the lip automatically extends. The operator releases the &#38;ldquo;raise&#38;rdquo; button and deck descends to rest on trailer. Control box includes red emergency stop button standard. When the truck pulls away, the deck descends to full down position, trips the limit switch and returns automatically to the level support cross traffic position.</p>Manufacturer: ]]> Model #: FOD/l']]> Price: $564.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/leg-option-for-electric-hydraulic-mechanical-dock-levelers-p-954.html Wed, 12 Sep 2007 20:29:32 GMT
18" Long Lip for Electric Hydraulic &#38; Mechanical Dock Levelers Dock Levelers http://www.easyrack.org/long-lip-for-electric-hydraulic-mechanical-dock-levelers-p-953.html <p> <b>18&#38;quot; Long Lip for Electric Hydraulic &#38;amp; Mechanical Dock levelers.</b> <b>Mechanical Docklevers </b> are engineered and designed for minimum maintenance. Make loading and unloading easy with this rugged dockleveler. This system features a pull chain operation.<b> Electric Hydraulic Dock Levelers</b> have a state-of-the-art hydraulic design with simple operation at the push of a button. The <b>Electric Hydraulic Dock leveler</b> is ideal for high usage dock areas. This is an easy to operate unit. Operator pushes and holds the &#38;ldquo;raise&#38;rdquo; button which activates the hydraulic pump and raises the deck. When the deck reaches the raised position the lip automatically extends. The operator releases the &#38;ldquo;raise&#38;rdquo; button and deck descends to rest on trailer. Control box includes red emergency stop button standard. When the truck pulls away, the deck descends to full down position, trips the limit switch and returns automatically to the level support cross traffic position.</p>Manufacturer: ]]> Model #: 18"LIP/]]> Price: $158.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/long-lip-for-electric-hydraulic-mechanical-dock-levelers-p-953.html Wed, 12 Sep 2007 20:23:05 GMT
Manual Return System for Electric Hydraulic Dock Levelers Dock Levelers http://www.easyrack.org/manual-return-system-for-electric-hydraulic-dock-levelers-p-952.html Manual Return System for Electric Hydraulic Dock Levelers
]]><b>Manual Cross Traffic Return System for Electric Hydraulic Dock Levelers</b> is no additional charge. <B> Electric Hydraulic Dock Levelers</B> have a state-of-the-art hydraulic design with simple operation at the push of a button. The <B>Electric Hydraulic Dock leveler</B> is ideal for high usage dock areas. This is an easy to operate unit. Operator pushes and holds the “raise” button which activates the hydraulic pump and raises the deck. When the deck reaches the raised position the lip automatically extends. The operator releases the “raise” button and deck descends to rest on trailer. Control box includes red emergency stop button standard. When the truck pulls away, the deck descends to full down position, trips the limit switch and returns automatically to the level support cross traffic position.Manufacturer: ]]> Model #: MCTS]]> Price: $0.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/manual-return-system-for-electric-hydraulic-dock-levelers-p-952.html Wed, 12 Sep 2007 20:18:24 GMT
Emergency Stop for Mechanical Dock levelers Dock Levelers http://www.easyrack.org/emergency-stop-for-mechanical-dock-levelers-p-951.html <p> <b>Emergency Stop for Mechanical Dock levelers.</b> <b>Mechanical Dock Levelers </b> are engineered and designed for minimum maintenance. Make loading and unloading easy with this rugged dockleveler. This system features a pull chain operation.</p>Manufacturer: ]]> Model #: ES]]> Price: $281.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/emergency-stop-for-mechanical-dock-levelers-p-951.html Wed, 12 Sep 2007 20:06:34 GMT
Bumper Extension for Truck Actuated Dock Levelers Dock Levelers http://www.easyrack.org/bumper-extension-for-truck-actuated-dock-levelers-p-950.html <p> <b>Bumper Extension for Truck Actuated Dock Levelers</b> is designed for low docks. Truck Actuated Docklevelers are the Fully Automatic Loading Ramp, so no dock attendant needed. This dock leveler unit comes with legs for in front of dock placement. The truck backs against twin actuating arms (bumpers) pushing carriage back (dock and trailer door must be raised). As carriage goes back, deck goes up. When the carriage bumpers contact dock, the deck floats down to rest on trailer. When truck pulls out, deck returns to level supported position automatically.</p>Manufacturer: ]]> Model #: BE]]> Price: $103.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/bumper-extension-for-truck-actuated-dock-levelers-p-950.html Wed, 12 Sep 2007 20:04:47 GMT
Shallow Pit Option for Dock Levelers Dock Levelers http://www.easyrack.org/shallow-pit-option-for-dock-levelers-p-949.html <p> <b>Shallow Pit Option for Dock Levelers</b> requires a minimum depth of 24&#38;quot; for Truck Actuated Docklevelers and a minimum depth of 17 1/2&#38;quot; for Mechanical &#38;amp; Electric Hydraulic Loading Dock Levelers. Truck Actuated Dock loading levelers are the Fully Automatic Loading Ramp, so no dock attendant needed. This loading dock leveler unit comes with legs for in front of dock placement. The truck backs against twin actuating arms (bumpers) pushing carriage back (dock and trailer door must be raised). As carriage goes back, deck goes up. When the carriage bumpers contact dock, the deck floats down to rest on trailer. When truck pulls out, deck returns to level supported position automatically. <b>Mechanical Docklevers </b> are engineered and designed for minimum maintenance. Make loading and unloading easy with this rugged dockleveler. This system features a pull chain operation.<b> Electric Hydraulic Dock Levelers</b> have a state-of-the-art hydraulic design with simple operation at the push of a button. The <b>Electric Hydraulic Dock Leveler</b> is ideal for high usage dock areas. This is an easy to operate unit. Operator pushes and holds the &#38;ldquo;raise&#38;rdquo; button which activates the hydraulic pump and raises the deck. When the deck reaches the raised position the lip automatically extends. The operator releases the &#38;ldquo;raise&#38;rdquo; button and deck descends to rest on trailer. Control box includes red emergency stop button standard. When the truck pulls away, the deck descends to full down position, trips the limit switch and returns automatically to the level support cross traffic position.&#38;nbsp;</p>Manufacturer: ]]> Model #: SPO]]> Price: $122.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/shallow-pit-option-for-dock-levelers-p-949.html Wed, 12 Sep 2007 20:03:08 GMT
Notch for Trailer Lock for Truck Actuated Dock Levelers Dock Levelers http://www.easyrack.org/notch-for-trailer-lock-for-truck-actuated-dock-levelers-p-948.html <p> <b>Notch for Trailer Lock for Truck Actuated Dock levelers.</b> Truck Actuated Docklevelers are the Fully Automatic Loading Ramp, so no dock attendant needed. This docklever unit comes with legs for in front of dock placement. The truck backs against twin actuating arms (bumpers) pushing carriage back (dock and trailer door must be raised). As carriage goes back, deck goes up. When the carriage bumpers contact dock, the deck floats down to rest on trailer. When truck pulls out, deck returns to level supported position automatically.</p>Manufacturer: ]]> Model #: TL]]> Price: $134.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/notch-for-trailer-lock-for-truck-actuated-dock-levelers-p-948.html Wed, 12 Sep 2007 20:01:36 GMT
Foam Insulation for Dock Levelers Dock Levelers http://www.easyrack.org/foam-insulation-for-dock-levelers-p-947.html <p> <b>Foam Insulation for Dock Levelers.</b> Truck Actuated Docklevelers are the Fully Automatic Loading Ramp, so no dock attendant needed. This dock leveler unit comes with legs for in front of dock placement. The truck backs against twin actuating arms (bumpers) pushing carriage back (dock and trailer door must be raised). As carriage goes back, deck goes up. When the carriage bumpers contact dock, the deck floats down to rest on trailer. When truck pulls out, deck returns to level supported position automatically. <b>Mechanical Docklevers </b>are engineered and designed for minimum maintenance. Make loading and unloading easy with this rugged dockleveler. This system features a pull chain operation.<b> Electric Hydraulic Docklevers</b> have a state-of-the-art hydraulic design with simple operation at the push of a button. The <b>Electric Hydraulic Dockleveler</b> is ideal for high usage dock areas. This is an easy to operate unit. Operator pushes and holds the &#38;ldquo;raise&#38;rdquo; button which activates the hydraulic pump and raises the deck. When the deck reaches the raised position the lip automatically extends. The operator releases the &#38;ldquo;raise&#38;rdquo; button and deck descends to rest on trailer. Control box includes red emergency stop button standard. When the truck pulls away, the deck descends to full down position, trips the limit switch and returns automatically to the level support cross traffic position.</p>Manufacturer: ]]> Model #: FI]]> Price: $211.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/foam-insulation-for-dock-levelers-p-947.html Wed, 12 Sep 2007 19:55:20 GMT
30,000 Capacity for Loading Dock Levelers Dock Levelers http://www.easyrack.org/30000-capacity-for-loading-dock-levelers-p-945.html <p> <b>30,000 Capacity for Dock Levelers</b> increases the standard capacity of 20,000 lbs. by an additional 10,000 lbs. Truck Actuated Docklevelers are the Fully Automatic Loading Ramp, so no dock attendant needed. This dock levelers unit comes with legs for in front of dock placement. The truck backs against twin actuating arms (bumpers) pushing carriage back (dock and trailer door must be raised). As carriage goes back, deck goes up. When the carriage bumpers contact dock, the deck floats down to rest on trailer. When truck pulls out, deck returns to level supported position automatically. <b>Mechanical Dock levelers </b>are engineered and designed for minimum maintenance. Make loading and unloading easy with this rugged dockleveler. This system features a pull chain operation.<b> Electric Hydraulic Dock levelers</b> have a state-of-the-art hydraulic design with simple operation at the push of a button. The <b>Electric Hydraulic Dock leveler</b> is ideal for high usage dock areas. This is an easy to operate unit. Operator pushes and holds the &#38;ldquo;raise&#38;rdquo; button which activates the hydraulic pump and raises the deck. When the deck reaches the raised position the lip automatically extends. The operator releases the &#38;ldquo;raise&#38;rdquo; button and deck descends to rest on trailer. Control box includes red emergency stop button standard. When the truck pulls away, the deck descends to full down position, trips the limit switch and returns automatically to the level support cross traffic position.</p>Manufacturer: ]]> Model #: TA-30K/]]> Price: $747.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/30000-capacity-for-loading-dock-levelers-p-945.html Wed, 12 Sep 2007 19:45:35 GMT
Curb Angle Set for Dock Levelers Dock Levelers http://www.easyrack.org/curb-angle-set-for-dock-levelers-p-944.html <p> <b>Curb Angle Set for Dock Levelers</b> is for any size dockleveler. Truck Actuated Docklevelers are the Fully Automatic Loading Ramp, so no dock attendant needed. This docklever unit comes with legs for in front of dock placement. The truck backs against twin actuating arms (bumpers) pushing carriage back (dock and trailer door must be raised). As carriage goes back, deck goes up. When the carriage bumpers contact dock, the deck floats down to rest on trailer. When truck pulls out, deck returns to level supported position automatically. <b>Mechanical Docklevers </b> are engineered and designed for minimum maintenance. Make loading and unloading easy with this rugged dockleveler. This system features a pull chain operation.<b> Electric Hydraulic Docklevers</b> have a state-of-the-art hydraulic design with simple operation at the push of a button. The <b>Electric Hydraulic Dockleveler</b> is ideal for high usage dock areas. This is an easy to operate unit. Operator pushes and holds the &#38;ldquo;raise&#38;rdquo; button which activates the hydraulic pump and raises the deck. When the deck reaches the raised position the lip automatically extends. The operator releases the &#38;ldquo;raise&#38;rdquo; button and deck descends to rest on trailer. Control box includes red emergency stop button standard. When the truck pulls away, the deck descends to full down position, trips the limit switch and returns automatically to the level support cross traffic position.</p>Manufacturer: ]]> Model #: CAS]]> Price: $273.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/curb-angle-set-for-dock-levelers-p-944.html Wed, 12 Sep 2007 19:43:37 GMT
Dual Vinyl Weather Stripping for Dock Levelers Dock Levelers http://www.easyrack.org/dual-vinyl-weather-stripping-for-dock-levelers-p-943.html Dual Vinyl Weather Stripping for Dock Levelers
]]><p> <b>Dual Weather Vinyl Weather Stripping for Dock Levelers</b> is factory installed. Truck Actuated Docklevelers are the Fully Automatic Loading Ramp, so no dock attendant needed. This docklever unit comes with legs for in front of dock placement. The truck backs against twin actuating arms (bumpers) pushing carriage back (dock and trailer door must be raised). As carriage goes back, deck goes up. When the carriage bumpers contact dock, the deck floats down to rest on trailer. When truck pulls out, deck returns to level supported position automatically. <b>Mechanical Dock Levelers </b>are engineered and designed for minimum maintenance. Make loading and unloading easy with this rugged dockleveler. This system features a pull chain operation.<b> Electric Hydraulic Docklevers</b> have a state-of-the-art hydraulic design with simple operation at the push of a button. The <b>Electric Hydraulic Dockleveler</b> is ideal for high usage dock areas. This is an easy to operate unit. Operator pushes and holds the &#38;ldquo;raise&#38;rdquo; button which activates the hydraulic pump and raises the deck. When the deck reaches the raised position the lip automatically extends. The operator releases the &#38;ldquo;raise&#38;rdquo; button and deck descends to rest on trailer. Control box includes red emergency stop button standard. When the truck pulls away, the deck descends to full down position, trips the limit switch and returns automatically to the level support cross traffic position.</p>Manufacturer: ]]> Model #: WS-DV]]> Price: $99.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/dual-vinyl-weather-stripping-for-dock-levelers-p-943.html Wed, 12 Sep 2007 19:43:20 GMT
Replaceable Brush Weather Stripping for Pit Mounted Dock Leveler Dock Levelers http://www.easyrack.org/replaceable-brush-weather-stripping-for-pit-mounted-dock-leveler-p-934.html <p> <b>Replaceable Brush Weather Stripping <i>for Pit Mounted Dock loading levelers</i></b> is easy to install. Bolt aluminum extrusion to sides of leveler then simply slide brushes into aluminum extrusion channel. <b>Available in 1&#38;rdquo; Width and 1 &#38;frac12;&#38;rdquo; Width. Available on the following Pit/Strip sizes: 50&#38;rdquo;/41&#38;rdquo;, 62&#38;rdquo;/53&#38;rdquo;, 85&#38;rdquo;/77&#38;rdquo; and 110&#38;rdquo;/101&#38;rdquo;.<br /> <i>*Please select appropriate size when ordering.</i></b></p>Manufacturer: ]]> Model #: WS-RB-]]> Price: $93.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/replaceable-brush-weather-stripping-for-pit-mounted-dock-leveler-p-934.html Thu, 01 Jan 1970 00:00:00 GMT
Dual Vinyl Weather Stripping for Pit Mounted Dock Levelers Dock Levelers http://www.easyrack.org/dual-vinyl-weather-stripping-for-pit-mounted-dock-levelers-p-933.html Dual Vinyl Weather Stripping for Pit Mounted Dock Levelers
]]><p> <b>Dual Vinyl Weather Stripping <i>for Pit Mounted Dock levelers</i></b> is a white dual-seal vinyl that attaches to the side of Dockleveler with self-tapping sheet metal screws. The replacement vinyl slides into extruded channel that is attached with self-tapping screws. <b>Available on the following Pit/Strip sizes: 50&#38;rdquo;/41&#38;rdquo;, 62&#38;rdquo;/53&#38;rdquo;, 85&#38;rdquo;/77&#38;rdquo; and 110&#38;rdquo;/101&#38;rdquo;. Available in Standard Dual Vinyl and Replaceable Dual Vinyl.<br /> <i>*Please select appropriate size when ordering.</i></b></p>Manufacturer: ]]> Model #: WS-6-DV]]> Price: $56.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/dual-vinyl-weather-stripping-for-pit-mounted-dock-levelers-p-933.html Thu, 01 Jan 1970 00:00:00 GMT
Truck Recessed Actuated Docklevers with Legs Dock Levelers http://www.easyrack.org/truck-recessed-actuated-docklevers-with-legs-p-865.html Truck Recessed Actuated Docklevers with Legs
]]><p> <b>Truck Recessed Actuated Docklevers<i> with Legs</i></b> is the Fully Automatic Loading Ramp, so no dock attendant needed. The truck backs against twin actuating arms (bumpers) pushing carriage back (dock and trailer door must be raised). As carriage goes back, deck goes up. When the carriage bumpers contact dock, the deck floats down to rest on trailer. When truck pulls out, deck returns to level supported position automatically. <font color="#0000f0"><b>Details:</b> Uniform Capacity 20,000 lbs; 55,000 psi high strength checker plate deck;12&#38;rdquo; long lip (extends 6 &#38;frac12;&#38;rdquo; into truck); toeguards on each side; service range of 14&#38;rdquo; above and 8&#38;rdquo; below dock; (2) molded bumpers &#38;ndash; 5&#38;rdquo;W x 16&#38;rdquo;H x 6&#38;rdquo;D; and lift by-pass for safety.</font><b>Available in 6&#38;rsquo;W x 6&#38;rsquo;L Recessed Unit, 6&#38;rsquo;W x 8&#38;rsquo;L Recessed Unit, 6&#38;rsquo;W x 8&#38;rsquo;6&#38;rdquo;L Recessed Unit and 6&#38;rsquo;W x 10&#38;rsquo;L Recessed Unit.<br /> <i>*Please select appropriate size when ordering.</i></b></p> <p> <strong><em>Truck Actuated Dockleveler Options:</em></strong></p> <p> &#38;nbsp;</p> <p> &#38;nbsp;</p> <table align="center" border="1" cellpadding="1" cellspacing="1" style="width: 80%"> <thead> <tr> <th scope="col"> &#38;nbsp;Model Number</th> <th> Description&#38;nbsp;</th> <th> Price&#38;nbsp;</th> </tr> </thead> <tbody> <tr> <td> &#38;nbsp;ER-WS-DV</td> <td> &#38;nbsp;Dual Vinyl Weather Stripping (Factory Installed)</td> <td> &#38;nbsp;81.00</td> </tr> <tr> <td> &#38;nbsp;ER-CAS</td> <td> &#38;nbsp;Curb Angle Set (For any size dock leveler)</td> <td> 248.00</td> </tr> <tr> <td> &#38;nbsp;ER-TA-30K/6</td> <td> &#38;nbsp;30,000 Pound Capacity For 6 Foot Length</td> <td> &#38;nbsp;617.00</td> </tr> <tr> <td> &#38;nbsp;ER-TA-30K/8</td> <td> &#38;nbsp;30,000 Pound Capacity For 8 Foot Length</td> <td> &#38;nbsp;811.00</td> </tr> <tr> <td> &#38;nbsp;ER-TA-30K/10</td> <td> &#38;nbsp;30,000 Pound Capacity For 10 Foot Length</td> <td> &#38;nbsp;1328.00</td> </tr> <tr> <td> &#38;nbsp;ER-7W/6</td> <td> &#38;nbsp;7 Foot Width For 6 Foot Length</td> <td> &#38;nbsp;367.00</td> </tr> <tr> <td> &#38;nbsp;ER-7W/8</td> <td> &#38;nbsp;7 Foot Width For&#38;nbsp;8 Foot Length</td> <td> &#38;nbsp;563.00</td> </tr> <tr> <td> &#38;nbsp;ER-7W/10</td> <td> &#38;nbsp;7 Foot Width For&#38;nbsp;10 Foot Length</td> <td> &#38;nbsp;846.00</td> </tr> <tr> <td> &#38;nbsp;ER-FI</td> <td> &#38;nbsp;Foam Insulation</td> <td> &#38;nbsp;192.00</td> </tr> <tr> <td> ER-TL</td> <td> &#38;nbsp;Notch For Trailer Lock</td> <td> &#38;nbsp;111.00</td> </tr> <tr> <td> &#38;nbsp;ER-SPO</td> <td> &#38;nbsp;Shallow Pit Option (minimum depth 24&#38;quot;)</td> <td> &#38;nbsp;101.00</td> </tr> <tr> <td> &#38;nbsp;ER-BE</td> <td> &#38;nbsp;Bumper Extension For Low Docks</td> <td> &#38;nbsp;85</td> </tr> </tbody> </table> <p> <br /> &#38;nbsp;</p>Manufacturer: ]]> Model #: SU-SCB]]> Price: $5159.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/truck-recessed-actuated-docklevers-with-legs-p-865.html Thu, 01 Jan 1970 00:00:00 GMT
Truck Recessed Actuated Dock Levelers Dock Levelers http://www.easyrack.org/truck-recessed-actuated-dock-levelers-p-855.html Truck Recessed Actuated Dock Levelers
]]><p> <b>Truck Recessed Actuated Docklevers</b> is the Fully Automatic Loading Ramp, so no dock attendant needed. The truck backs against twin actuating arms (bumpers) pushing carriage back (dock and trailer door must be raised). As carriage goes back, deck goes up. When the carriage bumpers contact dock, the deck floats down to rest on trailer. When truck pulls out, deck returns to level supported position automatically. <font color="#0000f0"><b>Details:</b> Uniform Capacity 20,000 lbs; 55,000 psi high strength checker plate deck;12&#38;rdquo; long lip (extends 6 &#38;frac12;&#38;rdquo; into truck); toeguards on each side; service range of 14&#38;rdquo; above and 8&#38;rdquo; below dock; (2) molded bumpers &#38;ndash; 5&#38;rdquo;W x 16&#38;rdquo;H x 6&#38;rdquo;D; and lift by-pass for safety.</font><b>Available in 6&#38;rsquo;W x 6&#38;rsquo;L Recessed Unit, 6&#38;rsquo;W x 8&#38;rsquo;L Recessed Unit, 6&#38;rsquo;W x 8&#38;rsquo;6&#38;rdquo;L Recessed Unit and 6&#38;rsquo;W x 10&#38;rsquo;L Recessed Unit.<br /> <i>*Please select appropriate size when ordering.</i></b></p> <p> <strong><em>Truck Actuated Dockleveler Options:</em></strong></p> <p> &#38;nbsp;</p> <p> &#38;nbsp;</p> <table align="center" border="1" cellpadding="1" cellspacing="1" style="width: 80%"> <thead> <tr> <th scope="col"> &#38;nbsp;Model Number</th> <th> Description&#38;nbsp;</th> <th> Price&#38;nbsp;</th> </tr> </thead> <tbody> <tr> <td> &#38;nbsp;ER-WS-DV</td> <td> &#38;nbsp;Dual Vinyl Weather Stripping (Factory Installed)</td> <td> &#38;nbsp;81.00</td> </tr> <tr> <td> &#38;nbsp;ER-CAS</td> <td> &#38;nbsp;Curb Angle Set (For any size dock leveler)</td> <td> &#38;nbsp;225.00</td> </tr> <tr> <td> &#38;nbsp;ER-TA-30K/6</td> <td> &#38;nbsp;30,000 Pound Capacity For 6 Foot Length</td> <td> &#38;nbsp;617.00</td> </tr> <tr> <td> &#38;nbsp;ER-TA-30K/8</td> <td> &#38;nbsp;30,000 Pound Capacity For 8 Foot Length</td> <td> &#38;nbsp;811.00</td> </tr> <tr> <td> &#38;nbsp;ER-TA-30K/10</td> <td> &#38;nbsp;30,000 Pound Capacity For 10 Foot Length</td> <td> &#38;nbsp;1328.00</td> </tr> <tr> <td> &#38;nbsp;ER-7W/6</td> <td> &#38;nbsp;7 Foot Width For 6 Foot Length</td> <td> &#38;nbsp;404.00</td> </tr> <tr> <td> &#38;nbsp;ER-7W/8</td> <td> &#38;nbsp;7 Foot Width For&#38;nbsp;8 Foot Length</td> <td> &#38;nbsp;619.00</td> </tr> <tr> <td> &#38;nbsp;ER-7W/10</td> <td> &#38;nbsp;7 Foot Width For&#38;nbsp;10 Foot Length</td> <td> &#38;nbsp;931.00</td> </tr> <tr> <td> &#38;nbsp;ER-FI</td> <td> &#38;nbsp;Foam Insulation</td> <td> &#38;nbsp;192.00</td> </tr> <tr> <td> ER-TL</td> <td> &#38;nbsp;Notch For Trailer Lock</td> <td> &#38;nbsp;111.00</td> </tr> <tr> <td> &#38;nbsp;ER-SPO</td> <td> &#38;nbsp;Shallow Pit Option (minimum depth 24&#38;quot;)</td> <td> &#38;nbsp;101.00</td> </tr> <tr> <td> &#38;nbsp;ER-BE</td> <td> &#38;nbsp;Bumper Extension For Low Docks</td> <td> &#38;nbsp;85</td> </tr> </tbody> </table> <p> <br /> &#38;nbsp;</p>Manufacturer: ]]> Model #: RU-SCB]]> Price: $4866.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/truck-recessed-actuated-dock-levelers-p-855.html Thu, 01 Jan 1970 00:00:00 GMT
Mechanical Dock Levelers Dock Levelers http://www.easyrack.org/mechanical-dock-levelers-p-854.html Mechanical Dock Levelers
]]><p> <b>Mechanical Loading Dock levelers</b> are engineered and designed for minimum maintenance. Make loading and unloading easy with this rugged dock leveler. This system features a pull chain operation. <font color="#0000f0"><b>Details:</b> Uniform Capacity 20,000 lbs; 55,000 psi high strength &#38;frac14;&#38;rdquo; checkered plate deck;16&#38;rdquo; long lip; telescopic steel toeguards on each side; service range of 12&#38;rdquo; above and below dock; and (2) laminated bumpers.</font><b>Available in 6&#38;rsquo;W x 5&#38;rsquo;4&#38;rdquo;L Unit, 6&#38;rsquo;W x 6&#38;rsquo;4&#38;rdquo;L Unit, 6&#38;rsquo;W x 8&#38;rsquo;4&#38;rdquo;L Unit, 6&#38;rsquo;W x 10&#38;rsquo;4&#38;rdquo;L, 7&#38;rsquo;W x 6&#38;rsquo;4&#38;rdquo;L Unit, 7&#38;rsquo;W x 8&#38;rsquo;4&#38;rdquo;L Unit, and 7&#38;rsquo;W x 10&#38;rsquo;4&#38;rdquo;L Unit.<br /> <i>*Please select appropriate size when ordering.</i></b></p>Manufacturer: ]]> Model #: RR-wl]]> Price: $2391.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/mechanical-dock-levelers-p-854.html Thu, 01 Jan 1970 00:00:00 GMT
Hydraulic Hand Pump Edge-O-Dock Levelers Dock Levelers http://www.easyrack.org/hydraulic-hand-pump-edge-dock-levelers-p-847.html Hydraulic Hand Pump Edge-O-Dock Levelers
]]><p> <b>Hydraulic Hand Pump Edge-O-Dock Levelers</b> systems are used to lift the leveler and extend the lip. The lip operator rotates the relief valve allowing the deck to descend down and rest upon the trailer. Unit comes complete with hand pump, wall-mount brackets, cylinder, 15 feet of hydraulic line and oil. The Edge-O-Docklevelers permanently attach to the face of the dock. These are recommended for docks at least 48&#38;rdquo; high. Concrete recess is not required. <font color="#0000f0"><b>Details:</b> Service range of 5&#38;rdquo; up and down; and 2&#38;rdquo; x 8&#38;rdquo; x 18&#38;rdquo; bumpers; standard ramping length of 27&#38;rdquo;; overall width is Usable width plus 26&#38;rdquo;.</font><i><font color="#00f000"> A steel dock edge, optional approach plate, or approach ramp is required for proper installation. </font></i><b>Available in 72&#38;rdquo; 15,000 Capacity (with 36&#38;rdquo; ramping length for smaller grade), 66&#38;rdquo; 20,000 Capacity, 72&#38;rdquo; 20,000 Capacity, 66&#38;rdquo; 25,000 Capacity and 72&#38;rdquo; 25,000 Capacity, 72&#38;rdquo; 25,000 Capacity (with 36&#38;rdquo; ramping length for smaller grade), 66&#38;rdquo; 30,000 Capacity, and 72&#38;rdquo; 30,000 Capacity. <br /> <i>*Please select appropriate size when ordering.</i></b></p>Manufacturer: ]]> Model #: PP-ccww]]> Price: $1340.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/hydraulic-hand-pump-edge-dock-levelers-p-847.html Thu, 01 Jan 1970 00:00:00 GMT
Electric Hydraulic Edge-O-Dock levelers Dock Levelers http://www.easyrack.org/electric-hydraulic-edge-dock-levelers-p-846.html Electric Hydraulic Edge-O-Dock levelers
]]><p> <b>Electric Hydraulic Edge-O-Dock levelers</b> is the easiest to operate. After the truck is backed against the dock, push and hold the control button. The leveler raises and the lip will extend and rest on the truck bed. The unit is operated by a &#38;frac34; HP. 11/220V, single phase motor pre-wired to 10V. Unit comes complete with motor, pump, control box, cylinder, lines and oil. The Edge-O-Docklevelers permanently attach to the face of the dock. These are recommended for docks at least 48&#38;rdquo; high. Concrete recess is not required. <font color="#0000f0"><b>Details:</b> Service range of 5&#38;rdquo; up and down; and 2&#38;rdquo; x 8&#38;rdquo; x 18&#38;rdquo; bumpers; standard ramping length of 27&#38;rdquo;; overall width is Usable width plus 26&#38;rdquo;.</font><i><font color="#00f000"> A steel dock edge, optional approach plate, or approach ramp is required for proper installation. </font></i><b>Available in 72&#38;rdquo; 15,000 Capacity (with 36&#38;rdquo; ramping length for smaller grade), 66&#38;rdquo; 20,000 Capacity, 72&#38;rdquo; 20,000 Capacity, 66&#38;rdquo; 25,000 Capacity and 72&#38;rdquo; 25,000 Capacity, 72&#38;rdquo; 25,000 Capacity (with 36&#38;rdquo; ramping length for smaller grade), 66&#38;rdquo; 30,000 Capacity, and 72&#38;rdquo; 30,000 Capacity. <br /> <i>*Please select appropriate size when ordering.</i></b></p> <p> <strong>EDGE-O-DOCKLEVELER OPTIONS</strong></p> <p> &#38;nbsp;</p> <p> &#38;nbsp;</p> <table align="center" border="1" cellpadding="1" cellspacing="1" style="width: 80%"> <thead> <tr> <th scope="col"> MODEL NUMBER</th> <th> DESCRIPTION</th> <th> PRICE</th> </tr> </thead> <tbody> <tr> <td> ER-PP-HP-R</td> <td> Replacement Hand Pump</td> <td> 399.00</td> </tr> <tr> <td> ER-FM-HOOK</td> <td> Pulling Hook For Mechanical Unit (old style)</td> <td> 31..00</td> </tr> <tr> <td> ER-FM-BAR</td> <td> Actuation Handle For Mechanical Unit (new style)</td> <td> 31.00</td> </tr> <tr> <td> ER-BB</td> <td> Steel Bumper Box</td> <td> 198.00</td> </tr> <tr> <td> ER-RB</td> <td> Rubber Bumper (Replacement)</td> <td> 35.60</td> </tr> <tr> <td> ER-FM-FM</td> <td> FM-Series (Hook Style) To FM-Series (Handle Style) Conversion Kit</td> <td> 224.00</td> </tr> <tr> <td> ER-FM-PP</td> <td> FM-Series To PP-Series Conversion Kit</td> <td> 630.00</td> </tr> <tr> <td> ER-FM-PE</td> <td> FM-Series To PE-Series Conversion Kit</td> <td> 1224.00</td> </tr> <tr> <td> ER-PP-PE</td> <td> PP-Series To PE-Series Conversion Kit</td> <td> 1014.00</td> </tr> <tr> <td> ER-CE</td> <td> Crub Edge-6&#38;quot; Channel x 96&#38;quot; Long</td> <td> 143.00</td> </tr> <tr> <td> ER-RAMP-2</td> <td> Approach Ramp 96&#38;quot;W x 12&#38;quot;L x 2&#38;quot;H</td> <td> 249.00</td> </tr> <tr> <td> ER-RAMP4</td> <td> Approach Ramp 96&#38;quot;W x 24&#38;quot;L x 4&#38;quot;H</td> <td> 483.00</td> </tr> <tr> <td> ER-AP</td> <td> Approach Plate 1/4&#38;quot; Thick x 12&#38;quot;L x 96&#38;quot;W</td> <td> 147.00</td> </tr> <tr> <td> ER-AP-BE</td> <td> Approach Plate 1/4&#38;quot; Thick x 12&#38;quot;L x 96&#38;quot;W With Beveled Edge</td> <td> 186.00</td> </tr> </tbody> </table>Manufacturer: ]]> Model #: PE-ccww]]> Price: $2468.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/electric-hydraulic-edge-dock-levelers-p-846.html Thu, 01 Jan 1970 00:00:00 GMT
Mechanical Edge-O-Dock Levelers Dock Levelers http://www.easyrack.org/mechanical-edge-dock-levelers-p-830.html Mechanical Edge-O-Dock Levelers
]]><p> <b>Mechanical Edge-O-Dock levelers</b> are operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically. The Edge-O-Docklevelers permanently attach to the face of the dock. These are recommended for docks at least 48&#38;rdquo; high. Concrete recess is not required. <font color="#0000f0"><b>Details:</b> Service range of 5&#38;rdquo; up and down; and 2&#38;rdquo; x 8&#38;rdquo; x 18&#38;rdquo; bumpers; standard ramping length of 27&#38;rdquo;; overall width is Usable width plus 26&#38;rdquo;.</font><i><font color="#00f000"> A steel dock edge, optional approach plate, or approach ramp is required for proper installation. </font></i><b>Available in 48&#38;rdquo; 6,000 Capacity, 66&#38;rdquo; 20,000 Capacity, 72&#38;rdquo; 20,000 Capacity, 66&#38;rdquo; 25,000 Capacity and 72&#38;rdquo; 25,000 Capacity. <br /> <i>*Please select appropriate size when ordering.</i></b></p>Manufacturer: ]]> Model #: FM-]]> Price: $814.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/mechanical-edge-dock-levelers-p-830.html Thu, 01 Jan 1970 00:00:00 GMT
Electric Hydraulic Dock Levelers Dock Levelers http://www.easyrack.org/electric-hydraulic-dock-levelers-p-823.html Electric Hydraulic Dock Levelers
]]><p> <b>Electric Hydraulic Dock Levelers</b> have a state-of-the-art hydraulic design with simple operation at the push of a button. The <b>Electric Hydraulic Dock leveler</b> is ideal for high usage dock areas. This is an easy to operate unit. Operator pushes and holds the &#38;ldquo;raise&#38;rdquo; button which activates the hydraulic pump and raises the deck. When the deck reaches the raised position the lip automatically extends. The operator releases the &#38;ldquo;raise&#38;rdquo; button and deck descends to rest on trailer. Control box includes red emergency stop button standard. When the truck pulls away, the deck descends to full down position, trips the limit switch and returns automatically to the level support cross traffic position. <font color="#0000f0"><b>Details:</b> Available in 115/208/230V, 1 Phase, or 208/230/460V, 3 Phase power options.Uniform capacity 20,000lbs; service range of 12&#38;rdquo; above and below dock; and (2) laminated bumpers.</font><b>Available in 6&#38;rsquo;W x 6&#38;rsquo;4&#38;rdquo;L Unit, 6&#38;rsquo;W x 8&#38;rsquo;4&#38;rdquo;L Unit, 6&#38;rsquo;W x 10&#38;rsquo;4&#38;rdquo;L, 7&#38;rsquo;W x 6&#38;rsquo;4&#38;rdquo;L Unit, 7&#38;rsquo;W x 8&#38;rsquo;4&#38;rdquo;L Unit, and 7&#38;rsquo;W x 10&#38;rsquo;4&#38;rdquo;L Unit. <font color="#0000f0">Base unit capacity is 20,000 lbs.</font><br /> <i>*Please select appropriate size when ordering.</i></b></p> <p> <strong>Mechanical &#38;amp; Electric Hydraulic Dockleveler Options</strong></p> <p> &#38;nbsp;</p> <table align="center" border="1" cellpadding="1" cellspacing="1" style="width: 80%"> <thead> <tr> <th scope="col"> MODEL NUMBER</th> <th> DESCRIPTION</th> <th> PRICE</th> </tr> </thead> <tbody> <tr> <td> ER-WS-DV</td> <td> Dual Vinyl Weather Stripping Pre-Installed</td> <td> 89.00</td> </tr> <tr> <td> ER-ES</td> <td> Emergency Stop (RR-Series Only)</td> <td> 255.00</td> </tr> <tr> <td> ER-CAS</td> <td> Curb Angle Set (For Any Size Dockleveler)</td> <td> 225.00</td> </tr> <tr> <td> ER-SPO</td> <td> Shallow Pit Option (171/2 Minimum Depth)</td> <td> 101.00</td> </tr> <tr> <td> ER-FI</td> <td> Under-Deck Foam Insulation</td> <td> 192.00</td> </tr> <tr> <td> ER-18&#38;quot;LIP/6</td> <td> 18&#38;quot; Long Lip For 6&#38;#39; Wide Dockleveler</td> <td> 143.00</td> </tr> <tr> <td> ER-18&#38;quot;LIP/7</td> <td> 18&#38;quot; Long Lip For 7&#38;#39; Wide Dockleveler</td> <td> 189.00</td> </tr> <tr> <td> ER-30K/6</td> <td> 30,000 Pound Uniform Capacity For 6&#38;#39; Length</td> <td> 612.00</td> </tr> <tr> <td> ER-30K/8</td> <td> 30,000 Pound Uniform Capacity For 8&#38;#39; Length</td> <td> 805.00</td> </tr> <tr> <td> ER-30K/10</td> <td> 30,000 Pound Uniform Capacity For 10&#38;#39; Length</td> <td> 1317.00</td> </tr> <tr> <td> ER-FOD/6</td> <td> Leg Option For In Front Of Dock Placement (6&#38;#39; Length)</td> <td> 513.00</td> </tr> <tr> <td> ER-FOD/8</td> <td> Leg Option For In Front Of Dock Placement (8&#38;#39; Length)</td> <td> 537.00</td> </tr> <tr> <td> ER-FOD/10</td> <td> Leg Option For In Front Of Dock Placement (10&#38;#39; Length)</td> <td> 591.00</td> </tr> <tr> <td> ER-SS/65</td> <td> Steel Shell For 6&#38;#39; x 5&#38;#39; Pour In Place Installation</td> <td> 411.00</td> </tr> <tr> <td> ER-SS/66</td> <td> Steel Shell For 6&#38;#39; x 6&#38;#39; Pour In Place Installation</td> <td> 441.00</td> </tr> <tr> <td> ER-SS/68</td> <td> Steel Shell For 6&#38;#39; x 8&#38;#39; Pour In Place Installation</td> <td> 491.00</td> </tr> <tr> <td> ER-SS/610</td> <td> Steel Shell For 6&#38;#39; x 10&#38;#39; Pour In Place Installation</td> <td> 558.00</td> </tr> <tr> <td> ER-SS/76</td> <td> Steel Shell For 7&#38;#39; x 6&#38;#39; Pour In Place Installation</td> <td> 453.00</td> </tr> <tr> <td> ER-SS/78</td> <td> Steel Shell For 7&#38;#39; x 8&#38;#39; Pour In Place Installation</td> <td> 502.00</td> </tr> <tr> <td> ER-CWO</td> <td> Cold Weather Oil-Good To - 10&#38;deg;F (Electric Dockleveler)</td> <td> 61.00</td> </tr> <tr> <td> ER-EH-TL*</td> <td> Electric Inerlock (EH Dockleveler &#38;amp; Trailer Restraint)</td> <td> 622.00</td> </tr> </tbody> </table> <p> <br /> &#38;nbsp;</p>Manufacturer: ]]> Model #: ER-EH-]]> Price: $4469.00
]]>
Add to Cart ]]>More information]]>
http://www.easyrack.org/electric-hydraulic-dock-levelers-p-823.html Thu, 01 Jan 1970 00:00:00 GMT