Shark Bite "Big Tooth" Tooth Bars for Buckets w/ 1/2",
3/4" or 1" Blade. Heavy duty tooth bars for loaders up to
15,000 lbs gross weight. Great for the new heavy weight skid-steers or on midsize
loaders used in tough applications. Quality materials and workmanship produce
a tough long lasting tooth bar. Shanks are 1 1/2" Heat Treated Cast Steel
and conform to ASTM 4150 for greater strength and abrasion resistance. Features
include 1/2" x 4" beveled mounting bar, 1.82" wide HD Cast pin-on
teeth - 3/8" coil roll pin, adjustable mounting brackets with dual elongated
holes and tension bolts and adjustable center mounting bracket on tooth bars
72" and over. Simple and quick to install. Slip the tooth bar onto your
blade, mark and drill a hole on each side. Install the 3/4" bolts and nuts,
tighten and it's ready to dig.
See table below for Specs.
BUCKET SIZE (I.D. WIDTH OF BUCKET) |
NO. OF TEETH |
60" to 62" |
7 |
63" to 65" |
7 |
66" to 67" |
7 |
68" to 72" |
7 |
73" to 75" |
7 |
76" to 84" |
8 |
85" to 90" |
9 |
91" to 96" |
10 |
Please Note: The following dimensions
are required when ordering tooth bars: Bucket inside width - Bucket I.D. and
thickness of cutting blade.
*Please select appropriate options when ordering.
Available Options: |
Width: |
|
|