Easy Rack sells two types of traffic barricades designed for specific traffic control purposes in specific commercial and public environments.Traffic barricades are normally orange in color, which makes them almost impossible for motorists to miss.However, in some environments where appearance really matters, barricades can be ordered in granite color.Poly cade barricades look like miniature “walls” that form obvious and unmistakable vertical barriers to people and vehicles.They can be used as singular units, or they can be arranged in tandem to create an artificial wall spanning a roadway, runway, or entire parking lot.Big barrier traffic barricades are basically barrels made out of special materials that can be filled with either sand, gravel, or even water to make them heavy enough to withstand the impact of a vehicle and stop it in its tracks, but also soft enough not to cause excessive damage to the vehicle at the point of collision.
Standard orange traffic barricades are used in mostly public and industrial spaces.Their most common use is in any public area where restricted access is needed to ensure motorist safety.We often see them in parking lots, for example, where construction, repair, or lighting pole installation is underway.Another important use for them is to block access to areas where hazardous materials are stored.Chemical companies almost always use some sort of traffic barricade to prevent people and equipment from being harmed or damaged by exposure to dangerous materials or industrial waste.Certain forms of machinery in large factories can also be potentially dangerous if untrained employees, clients, or visitors to the factory get to close.Traffic barricades clearly designate where the safe areas are and where restricted access begins.
Amusement parks sometimes use orange traffic barricades to keep underage children away from areas intended only for adolescents and adults.They also use them to limit access of golf carts and other small motor vehicles typically used to transport employees and customers around the park.In our world of material handling, some of our biggest poly cade traffic barricade customers are construction companies.They often buy these products in large quantities and literally use them to map out a construction site, showing where public and restricted areas are located and limiting access to these places for only certain levels of personnel and types of vehicles.All traffic barricades are rust proof and UV resistant, making them both rain and sun proof as much as current technology permits.
Like we mentioned earlier, both poly cade barricades and big barrier traffic control barrels can be ordered in a number of different colors.Orange barrels are made with additional reflective stripes that catch and mirror sunlight.However, this can be very unattractive in formal settings like the front of city hall buildings, major airports, exclusive neighborhoods, large universities, and corporate headquarters.If necessary, Easy Rack can supply these barricades in granite color, yellow, or white.Our smaller poly cade traffic barriers weigh only 70 lbs.The larger barrel-style traffic barriers can weigh over 3,000 pounds when filled with sand.Easy Rack experts will help you select the style, size, and filler content of your barricade most appropriate to your location and application.Call now for a free quote and more information.
Easy Rack carries a wide variety of commercial shelving, material handling equipment, commercial lighting, used pallet racks, and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with warehouses located throughout the United States that enable us to service all 50 states including Washington DC, Nashville-Davidson, Tennessee, Las Vegas, Nevada. Portland, Oregon, Oklahoma City, Oklahoma, Tucson, Arizona, Long Beach, California, Atlanta, Georgia, Fresno, California, Sacramento, CA, Corpus Christi, TX, Plano, Texas, Garland, TX, Laredo, Texas, Lubbock, TX, Jersey City, NJ Newark, New Jersey
Cantilever arms are the most important component of a cantilever racks because they actually support the products themselves.A cantilever storage rack arm can either be straight, offering quick access to non-sensitive components, or it can angle upward to prevent more fragile items from falling to the floor.
There are several guidelines to follow when choosing cantilever racks & arms that will ensure the safety of your products and employees.
1.The first rule to adhere to is to make sure that the divided weight of stored materials never exceeds the weight capacity of an individual arm.For instance, 36,600 lbs. of weight divided between 12 cantilever arms will require using arms with 3,050 lbs. capacity.
2.A second rule you must never forget to follow is to divide the total weight of your stored materials by the number of vertical uprights in the system.In our example above, each vertical upright would support 12,200 lbs. of weight—the factor of 36,600 divided by 3.
3.Never allow the weight on a single cantilever rack arm to exceed the weight capacity of a vertical upright.To do so would put stress on the entire system.
4.Next, you must ensure that the depth of the load never exceeds the length of the cantilever storage arm.If it does, the cantilever arms are pulled forward by the pressure and the system becomes unstable.
5.Finally, check to make certain that stored products overhang the cantilever rack arms according to the correct proportions.The number of arms should be multiplied by the total product length to determine this figure.For instance, if you are using a 20 foot run with 4 arms, the total overhang should be ¼ X 20 feet, or 5 feet.This means that approximately 2” of the product should overhang on either side.
Understanding these basic principles will enable you todetermine not only the number and weight capacities of the cantilever rack arms you will need, but also the strength and number of the vertical uprights and brace sets.
Smaller storage requirements, such as the ones commonly found in maintenance rooms, shops, and tool rooms, may only a smaller cantilever system like the Double Sided Horizontal Bar rack.It features 9 arms that extend upward at an angle and act as dividers creating bays of storage.
The total rack capacity is 2,600 pounds evenly distributed load on both sides. More weight capacity can be achieved by placing two identical units side by side.This is very useful for storing smaller pipes and tubing supplies.
Medium duty cantilever racks can either brace sets, single sided uprights, or double sided uprights.These units are typically built custom to client product type and storage needs.Cantilever arms and uprights are sold separately for this reason, allowing basic parts to be assembled with a broad range of customization to a wide range of material storage requirements.
Cantilever arms on medium duty cantilever racks can be adjusted up and down the full length of the upright and secured in pre-drilled holes with a key lock. All arms feature lips to prevent product from falling off. Uprights are sold separately, not in pairs, to anticipate exceptionally heavy load requirements such as the ones mentioned at the beginning.Custom rack systems can be designed for your special application.Medium-Duty Cantilever Racks are ideal for both manual loading and easy forklift accessibility.
Heavy-Duty Cantilever Racks feature completely arms that are engineered to eliminate the storage problem of long, unwieldy stock like lumber, furniture & pipe. Cantilever racks are designed specifically for fork truck access and can be positioned in pre-drilled holes throughout the length of the upright.
Each cantilever rack arm also has a lip that prevents roll offs and dropped products.Arms and cantilever uprights for the heavy duty system are sold individually, not in pairs.
Because cantilever racks require precise calculations to be properly designed, it can often save significant time to call and Easy Rack specialist and let him or her work out the math to save you a step.This also enables your representative to custom build your cantilever system literally from the ground up, with brace sets, uprights, and arms combined in just the right proportion for your facility’s needs.
Easy Rack carries a wide variety of commercial shelving, material handling equipment, commercial lighting, used pallet racks, and modular prefab buildings installed nationwide. If you cannot find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with warehouses located throughout the United States that enable us to service all 50 states. For more information email us [email protected]
Industrial scales are used to weigh products, raw materials, and heavy objects.They are a critical part of many operations such as food processing plants, where exact measurements are necessary to maintain profit margins.The fishing industry also uses industrial scales to ensure that all regulations regarding the catching and preparation of fish are followed.Some pharmaceutical companies use them for similar reasons as well, and any packaging or distribution center is going to need at least one heavy duty industrial scale to make sure that trucks are loaded�but not overloaded�to capacity.
Our industrial scales feature quick-connects and factory calibration that provides an easy, allowing "out of the box" setup, and easy user operability.Four series models are available, measuring either 48� X 48� or 60� X 60�.Capacities range between 5,000-20,000 pounds, depending on the model.Standard models feature a lead-epoxy finish, and heavy-duty models come as a stainless steel platter.Heavy-duty models are also covered with a diamond tread platform.
Industrial scales are solid platforms built with steel channel-frame design.This provides strength and protection to load cells, cables, and junction boxes.Four adjustable legs and 5,000 division load cells give these units maximum stability for any type of weighing application.
Easy Rack industrial scales require no additional accessories for installation.Each platform comes ready to operate straight out of the box.Simply plug the 25 foot heavy-duty cable into the indicator and the unit is ready for use.High-volume facilities such as meat processing plants, markets, manufacturers operating multiple assembly lines, and foundries prefer this out of the box operability as a safeguard against downtime.Also, the easy setup is due to a design that makes these scales just as easy to operate.
One of the most important features on any industrial scale is the measurement indicator.Without it, no one can read the scale!Easy Rack offers four different monitor options for every industrial scale we sell.The standard indicator is our EWI (economical weigh indicator).This compact monitor is ideal for weighting livestock, trucks, and heavy-duty pallets.
The EWI indicator can be programmed to measure anything from 10kg to 10 tons, the WI features and is able to convert kilograms to pounds with a touch of a keypad.The LCD display is backlit, so it is easy to read no matter where it is located.It works conveniently with a PC/printer through a serial port, and is hermetically sealed to ensure dependability regardless of the conditions.
Easy Rack also sells a waterproof model for clients in wet and humid geographies.
A number of more sophisticated indicators, designed for certain industries and specialized functionality, can be installed on industrial scales by request.Advanced, programmable indicators offer dual platform capabilities, 40,000 external divisions, and an NTEP approved rating.A more affordable programmable indicator can be ordered by companies on a tight budget, and features keyboard tares, a toggle between kg and lbs, and 8,000 external channels.Spill proof indicators and precision counting indicators are also available for industrial scales.Ask your Easy Rack specialist about these options.
Easy Rack carries a wide variety of stack racks, commercial shelving, material handling equipment, commercial lighting, used pallet racks, and modular prefab buildings installed nationwide. If you cannot find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with warehouses located throughout the United States that enable us to service all 50 states including New York NY, Los Angeles CA, Miami, FL. Chicago, IL. Denver CO., El Paso, Texas, Dallas TX, San Antonio, TX, Austin, TX, Boise ID, Atlanta GA, Albuquerque NM, Raleigh-Durham NC, Washington DC, Albuquerque NM, Huntsville AL, Fayetteville AR, Norfolk VA , Madison WI., Corpus Christi, TX, Plano, Texas, Garland, TX, Laredo, Texas, Lubbock, TX.
Commercial & Industrial Bulk Warehouse New & Used Storage Racks & Tire Storage Rack.
Easyrack.org helps industrial and warehousing facilities consolidate space, improve organization, and create safer working environments with both new and used storage racks of all kinds.Storage racks eliminate guesswork in inventory by making it easy to store and retrieve supplies. Greater organization supports accurate accounting and eliminates unnecessary multiple orders that occur when supplies cannot be quickly found.When properly used, storage racks consolidate supplies in fixed locations and help prevent spillage, breakage, and injuries that often occur through mismanaged space.This allows for closer and more accurate tracking of products and materials, and it minimizes the need to move to larger facilities when space becomes limited.
Used storage racks prove ideal for facilities needing to convert empty wall-space into storage space for boxes and non-hazardous materials that require less care and handling and less attention to maintain.Used storage racks offer significant savings to procurement managers with tight budgets.When reducing overhead it is better to invest in adequate quality at lower cost than to neglect investment altogether and compromise efficiency and safety.Easy Rack maintains multiple lines of distribution, so virtually any piece in our online catalogue can be ordered used at savings up to 40%.
We carry many varieties of new storage racks designed for specific functions in today?s factories and warehouses.Bulk storage racks make up a large percentage of the purchase orders we receive due to their amazing capacity to double storage space in most facilities.As moving costs rise, facilities requiring more square footage should exhaust all available storage options to consolidate their current floor plan before investing in a move.Our bulk storage racks consistently help smaller companies find the breathing room they need within their own four walls.This minimizes downtime and eliminates the typically enormous expenditure of an industrial move.Distributorships with large shipping and receiving volume can improve efficiency and safe handling of materials with warehouse storage racks.Ideal for hand-loaded materials, warehouse storage racks can create near assembly-line speed by providing workers with quick access to material storage and organization.
Choosing the right build and material for your storage rack depends on the nature and weight of the materials you are storing.Wire decking proves effective for virtually any type of material, while wood proves a sturdy and practical support for non-flammable supplies stored in standard cardboard boxes.Material handling also comes into play as many of the heavy-duty storage racks are built to support containers too dangerous or too cumbersome to load by hand.For machine-loaded materials it is always best to choose wide span metal frames and wire decking to allow for maximum mobility and optimal distribution of weight.Easy rack also offers a number of steel racks ideal for heavy containers of sensitive materials and built for maximum load capacity fully requirement with all OSHA and ANSI requirements.
Easy Rack carries a wide variety of material handling equipment, commercial lighting, used pallet racks, commercial christmas lighting, and modular buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with distributors located in all 50 States including New York NY, Los Angles CA, Miami, FL. Chicago, IL. Denver CO., Dallas TX, San Antonio, TX. and Austin, TX.
Dockboards are devices that bridge the gap between the truck and the dock, allowing for the safe loading of trucks.Some dockboards are used in rail stations to load and unload rail cars.Dockboards of all kinds are not to be confused with dock plates.This is a common error, but one that must be avoided when determining the best purchase for a loading dock.Dock plates are rectangles of steel or aluminum that that have a locking leg to hold them in place and handles to carry them with.They are intended only for hand trucks and pallet jacks- NOT for vehicles.Dockboards are designed for roadway vehicles to drive over.They are shaped like plates but are made with additional structural components that enable them to support more weight.They have curbs on the side to prevent vehicle roll offs, and models built for rail cars are sometimes built with curbs on the underside of the plate surface.
Dockboards can support weight capacities ranging from 6,000 to 40,000 lbs.They are made from either aluminum or heavy duty steel.Steel models are generally preferred in industrial environments for a number of reasons.Steel can carry more weight and is much more durable and resilient.Aluminum dockboards are softer and have to be reinforced with steel curbs to handle mid-range weights of 10,000 to 15,000 pounds.
Aluminum can be effective in certain environments where only one person is available to setup the dockboard, and where there is only a minimal or mid-range weight stress involved.Otherwise, Easy Rack recommends investing in a steel model for maximum durability and safety.
This dockboard is made from high grade "diamond deck" aluminum and is reinforced with side curbs made from structural steel.It makes a light weight alternative to steel boards. Steel curbs that are bolted in place add extra stability, and locking legs provide secure positioning & runoff protection.An 11" lip offers smooth transition from the dock to the truck. ANSI Certified.
This economical steel dockboard with all welded steel curbs is design with a standard 11" lip and fixed lock legs.Its primary use is in standard warehouse environments where occasional use does not call for high cycle, high capacity use.Weight capacities range from 10,000 pounds for use with trucks up to 3,000 pounds and 13,000 pounds for use with trucks up to 4,000 pounds.
Red Pin Dockboards are designed for the rapid pace and stress of warehousing and distribution. Their design is for the unusual parking application.Sometimes a truck cannot park flush against a dock and must stop short. This is called a "park out". The RP model features a four pin locking solution assures that the board is locked in place for safe use. These boards are only for warehousing operations, not railcar applications. Standard capacities of 15,000 pounds and 20,000 pound carry the ANSI certification. Higher capacities can be ordered through your Easy Rack material handling specialist.
Railcar dockboards support weight capacities starting at 22,000 lbs and rising to 40k, 60k and 90k. Special lift equipment and attachments as well as shift usage and transit cycles are considered in the building of your rail board. This is the only ANSI certificated railboard on the market.Easy Rack also ships railcar to rail car boards per client request.
All steel construction and our heavy-duty design makes these boards ideal for the busy dock where high traffic cycles, high capacities and multiple shifts demand the maximum from equipment. Lock pins in lieu of legs allow for exact placement of the board between the dock and truck, and an all welded construction makes the unit extra tough under stress.Weight capacities are available in 15,000 lbs and 20,000 lbs and are ANSI certified.
Easy Rack carries a wide variety of loading ramps, used pallet racks, commercial shelving, material handling equipment,
commercial lighting, and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720.
Although they are one of the most convenient storage devices ever invented, the sheer unwieldy bulk of 55 gallon oil drums means that they can be tricky to manipulate without the correct tools, and due to the many different uses that the drums have, it is important to consider what you will be using them for, and ensure that the correct drum handling equipment available in order to make certain that staff are able to move, fill and empty the drums in the correct manner and with the emphasis on safety
If you have a large stock of liquids that you keep in drums, then having the means to store them neatly and compactly is essential.Perhaps the most important piece of drum handling & drum lifting equipment that is required in an environment where drums need to be placed on top of each other for storage is a drum stacker.This clever tool is designed to make lifting drums on top of one another a simple task.Drum handlers can lift a standard 55 gallon drum weighing up to 800lb to a height of 96 inches (8 feet), meaning that you can stack drums 3 high in order to reduce the floor space required by two thirds.The stacker is also useful as a crane for loading drums onto the back of a truck if needed, making it a very versatile piece of material handling equipment.
Whether you are using the drum for waste storage or as a supply of material for manufacturing, being able to move it around is important so that it can be used by more than one person at a time.A cost effective way of being able to move a drum is with a simple drum dolly.These lightweight but hard wearing drum carts fit around the bottom of the drum and use polyurethane casters in order to ensure smooth movement across the floor.
If your workplace uses 55 gallon oil drums as a source for liquids such as lubricant or paint, then getting the contents out is important, and the best piece of drum handling equipment for this task is a drum pump and tap.Slotting directly into the top of the drum, the tap uses a small electronic drum pump to get the contents of the drum out into more manageable containers.Without having to cut open the top of the drum completely or use a messy siphon, you can reduce the amount of wastage that you would otherwise incur, and save money thanks to this.
Disposing of waste within EPA guidelines can be an expensive business, but by reducing the volume of waste produced, costs can be minimized.With a hydraulically powered drum crusher, a standard 55 gallon oil drum can be crushed into a 6” high disk ready for disposal.The power offered by this unique piece of drum handling equipment is enormous, and it is controlled with a single touch mechanism that is reliable and fast in action.By reducing the amount of storage space required, and presenting a much smaller amount of recycling waste by volume, efficiency is improved enormously.
Easy Rack carries a wide variety of commercial shelving, material handling equipment, commercial lighting, used pallet racks, commercial christmas lighting and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with regional distribution centers located in all 50 States including New YorkNY, Los AngelesCA, Miami, FL. Chicago, IL. Denver CO., Dallas TX, San Antonio, TX, Austin, TX, Boise ID, Atlanta GA, Albuquerque NM, Raleigh-Durham NC, Washington DC, Albuquerque NM, Huntsville AL, Fayetteville AR, Norfolk VA , Madison WI.
Lynda Mock Is in author for easyrack. She has been involved in the industry since 2008. She not only writes articles for the company but also runs the daily operations of the business. Their are currently over 400 articles on easyrack that are available for visitors to read and get familiar with the Warehouse Equipment industry.
Over the past few years, concern about workplace injuries, and work related conditions has increased, and many employers are finding themselves facing costly lawsuits from former employees who claim that the conditions in which they worked at a particular facility have contributed to physical problems later in life. One of the principal reasons why industrial environments are facing so many of these claims is that until comparatively recently, there were few options to make the workplace more user friendly. This is beginning to change, and businesses can now find a wide range of ergonomic material handling equipment to minimize physical stress on employees, and reduce the incidence of work related injuries as a result.
The science of ergonomics is principally concerned with making things fit properly. By applying certain design and construction techniques to products for the workplace, such as benches, chairs, and other items, they can be made to fist the body better. Flexible design coupled with as much adjustability as possible means that staff are able to enjoy a much more tailored working environment where they can adjust practically every aspect in order to make their access to things much easier. By installing ergonomic material handling equipment wherever necessary through your workplace, you will be able to offer staff a much more comfortable environment and reduce physical stress.
Aside from making a workplace more comfortable for staff, there are a number of other major benefits of using ergonomic material handling equipment wherever possible. The most important factor is employee safety. With equipment such as tilting tables and height adjustable workbenches, operators are able to get a much more balanced view of materials, and rather than having to move themselves into potentially dangerous or risky situations in order to see an object from a particular angle, they can use the adjustable surfaces to carry out the task, and stay safely on the floor.
The second major advantage of ergonomic material handling equipment is as a direct result of the ease with which objects can be manipulated. By offering easier access to objects and making it a much simpler proposition for operators to see them from all angles, productivity is raised. Less time spent in moving around the object means more time can be spent performing the necessary action. This translates into a more efficient workplace, which will generate a much better profit margin.
There is a whole range of items available from Easy Rack that can be installed throughout a standard factory or stock house in order to make it more employee friendly. We offer a comprehensive range of adjustable work benches, work platforms, and lifting gear that has been carefully designed and built to the highest possible standards in order to make access to all areas of the workplace much more user friendly, and to ensure that staff are exposed to minimal levels of physical stress that might compromise their health in later years.
Easy Rack carries a wide variety of material handling equipment, commercial lighting, used pallet racks, commercial christmas lighting and modular buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with distributors located in all 50 States including New York NY, Los Angeles CA, Miami, FL. Chicago, IL. Denver CO., Dallas TX, San Antonio, TX. and Austin, TX
Folding Security Gates limit access to hallways and buildings without blocking exposure to air or blocking visibility.Warehouses and manufacturing companies frequently use folding security gates to guard halls, building entrances, warehouse bay doors, loading docks, and rear doorways to businesses.Schools and medical facilities also use them to limit access after normal business hours.Residences and offices can also profit from folding security gates when added security procedures are desired and deemed appropriate.
The typical folding gate design is that of an interlocking lattice of galvanized steel, riveted back to back to offer a strong barricade against invasion and to survive exposure to environmental elements. Standard sizes offered by Easy Rack from 4-1/2' wide by 5-1/2' high single gates to 16' wide by 8-1/2' high double gates. Door gates are made for door openings between 24” to 48” wide in heights from 61” to 83”. Portable gates are available in sizes 6 and 12 feet wide. Easy Rack will also provide custom size single and double security folding gates up to 10’ high.
These gates are intended to secure door openings ranging from 24" to 48" wide and 61" to 83" high. They feature a exclusive reversible hinge design that allows them to be mounted to either the right side or the left side of the doorway in either the casing or the face of the opening. Each folding security door gate comes with a locking bar that can be secured with a padlock. When not in use, the gate will pivot 180 degrees out of the way when open.
These one piece gates are intended for standard openings, patio doors, garages, and industrial and commercial entrances measuring 4-1/2' to 7-1/2' wide and up to 8' in height. Single folding security gates are shipped preconfigured to lock on the left (default position), but an Easy Rack specialist can have them custom made to lock on the right side. A ball bearing caster, welded to the lead rail of the gate, is used to aid in the opening and closing of the gate. Like door gates, single gates will pivot 180 degrees when not in use. To compensate from the loss of structure when the gate is stretched open, a drop pin holds the center of the gate in place.
These gates are essential for larger openings, overhead doors, warehouse dock doors, storefronts, and bay doors in factories and warehouses. These two-piece gates can be custom fitted to any size width, and a maximum height of 10'. Because they are Double Gates, each side will pivot 180 degrees out of the way, allowing the gates to be used with dock and overhead warehouse doors in commercial facilities that need an clear passage for vehicles and material handling equipment to pass through.
These gates are routinely used in public schools and hospitals to seal off hallways, cafeteria areas, and sensitive areas within the building. They feature a two piece design consisting of dual 6’ X 6.5’ sections. They are easy to install because they are designed to pass through standard door heights and be can be rolled up for convenient storage. For extremely large entrances or hallways, additional 6’ sections can be added on.
Easy Rack carries a wide variety of material handling equipment, folding security gatespallet racks, and modular buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with distributors located in all 50 States including New York NY, Los Angeles CA, Miami, FL. Chicago, IL. Denver CO., Dallas TX, San Antonio, TX. and Austin, TX.
Below is a list of articles with the most recent ones listed first.
Folding security gates block access to passageways and buildings without blocking ventilation or limiting visibility. Warehouses and manufacturers use folding gates to protect halls, entrances to buildings, warehouse doors, docks, and plant entrances.
Security gates improve security, prevent unauthorized access to restricted areas, maintain ventilation to the building, and provide guards and managers with visibility in both directions.
Collapsible gates install over dock doors, lift-up doors, hallways and entranceways and provide ventilation, visibility, and security. Collapsible gates are manufactured from 3/4" wide 14 gauge steel channel that is riveted together back to back.
Portable security gates are often used for restricting access in hospitals, schools and construction sites where certain areas must be protected from theft or vandalism, or where certain areas simply do not need to be accessed by the general public.
teel security gates block access points and create restricted areas for security and safety reasons. Made from a sturdy, impenetrable lattice of 14-guage channel steel, a steel security gate cannot be pushed through or broken down.
Metal security gates block access points and create restricted areas for security and safety reasons. Made from a sturdy, impenetrable lattice of 14-guage channel steel, a metal security gate cannot be pushed through or broken down.
Industrial security gates are intended to cover access points of different types and sizes. They are made from a sturdy, impenetrable lattice work of 14-guage channel steel.
Warehouse folding door security gates. Even the sturdiest of doors do not always prevent unauthorized entry or break in. Intruders can and will enter virtually any door if they enough determination.
Provide the additional support needed to lift long or large items with a fork truck.
Benefits:
Welded steel construction with cast steel tips.
Steel retaining strap (loop style) prevents fork extensions from sliding off forks during use.
Powder coat yellow finish
OSHA regulations require that extensions are no more than 150% of the existing fork length. E.g. 48" existing forks, the fork extension should not exceed 72")
Convenient fork truck work platforms quickly and safely transport maintenance personnel where they are needed. Work platform attaches to fork truck by inserting forks into fork pockets and chaining platform to fork truck.
Dump loaded pallets - skids easily without leaving the seat of your fork lift with the all welded steel constructed Pallet Dumper. Unit fits to forks and is secured by a safety chain. Two retainers hold the pallet in place while dumping the contents into the hopper or dumpster.
Unique performance, convenience and safety features are built into every Lift Boom. Fabricated from structural steel with welding to meet American Welding Society (AWS) creates a strong and sturdy lift boom that will provide long-term service.
Drum Carriers & Rotator Fork Truck Attachments This product allows you to easily transport and rotate 55 gallons steel drums using a fork truck. Drums are held securely in place by a durable chain locking system. Each unit is provided with a 15 foot long chain to allow the drum to be rotated up to 360? from the fork truck operator's seat.
Hoisting Hook Fork Lift Attachment Convert your fork truck into a swivel hook in a matter of seconds. The easy to attach Hoisting Hook does not require the assistance of special tools. Secured to the fork truck by means of a 36" long safety restraint and screw clamps. Available in single or double fork design. Units are zinc plated. Hook with shackle included.
Snow Plow Blade Forklift Attachments Snow Plow Blades are multifunctional to work with your existing fork Truck equipment. No more waiting for daytime snow removal, simply place the snow blade onto your fork truck and away you go. Prevent damage from obstacles and rough or uneven surfaces with trip springs. Easy angling and back-grade abilities allow you to go where your fork lift goes. Dock Fork Truck Attachment
Dock fork lift attachments are designed to help load and carry material from loading dock fork lift to truck effectively changes loading procedures and time.
Easy Rack carries a wide variety of commercial shelving, material handling equipment, commercial lighting, used pallet racks, commercial christmas lighting and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with regional distribution centers located in all 50 States including New YorkNY, Los AngelesCA, Miami, FL. Chicago, IL. Denver CO., Dallas TX, San Antonio, TX, Austin, TX, Boise ID, Atlanta GA, Albuquerque NM, Raleigh-Durham NC, Washington DC, Albuquerque NM, Huntsville AL, Fayetteville AR, Norfolk VA , Madison WI.
Aluminum gantry cranes offer the benefits of mobility and minimized accessories. Because aluminum gantry cranes feature pinned connections, there are no bolts or riveting required for assembly. A single person can assemble and dissemble these cranes and carry them with a two-strap harness that fits across the back. It is not necessary to utilize hoists and fork trucks, so these cranes are ideal for companies with minimum equipment budgets. Aluminum gantry cranes weigh less than other materials but offer sturdiness and impressive weight capacity.
Work area portable gantry cranes feature lightweight mobility ideal for light-lifting applications. Featuring four polyurethane-on-steel swivel casters, work area gantry frames consist of solid welded steel construction and a straddle width and base that measure 68" and are sealed with a powder coat finish. Hoists and trolleys can be ordered separately.
For transporting and positioning heavy materials, use steel gantry cranes from Easy Rack. Available in a variety of sizes, the solid steel construction provides a reliable material-handling tool built for optimal equipment lifespan. Steel gantry cranes move easily across floor space on 8" diameter locking phenoloic roller bearing casters. Easy Rack also supplies and optional lever ratchet that enables quick, one-person height adjustment.
When working handling materials in work cells and work areas, use Easy Racks mini overhead cantilever jib cranes to get the job done more safely and in less time. The unique design of the cantilever jib crane allows for outriggers to be mounted underneath a workbench. Workers can then lift materials quickly and safely to the workbench from a cart. Easy Rack also supplies these carts, along with hoist and trolleys, so you can obtain the maximum efficiency on a single purchase order to us. The cantilever jib features a straddle with of 48" and consists of tough stainless steel construction with a blue powder coat finish.
For multi-application needs Easy Rack carries both extra travel tri-post jib cranes and floor mounted jib cranes. The extra travel jib features side posts that straddle the worktable and enable workers to pass materials over the work area. Workers can also mount the legs in front of the worktable and overhead beam cantilever products over the worktable. When personnel require 360 degree rotation to maximize workspace, use the floor mounted jib crane. Featuring solid steel construction and 70" usable length I-beam, this jib will help workers safely and quickly lift awkwardly sized materials. The floor mounted jib crane comes with reinforced concrete pads for sturdy installation.
To protect workers from injuries when working near low ceilings, Easy Rack furnishes wall jibs designed to lift awkward materials with true vertical wall mounting capability. We also furnish stainless steel tie rod jib cranes that mount to walls or columns in exceptionally high ceilings and features hook coverage and features 180 degree rotation.
For material handling performed from the back of pickups, Easy Rack recommends the WTJ-2 jib crane. With a load lift of up to 1,000 pounds, it will lift items from ground to truck bed height and rotate them over the cargo area. It includes a telescopic boom design and manual hydraulic hand pump that pivots the boom up and down. Accessories included in purchase are one grab hook, one chain slot lock, and one sling hook with latch. This jib crane measures 56" in height and swivels on a 360 degree 12" base. The WTJ-2 features welded steel construction and is painted yellow for safety.
We also furnish a number of specialty jib cranes for specialized applications. The Air Balancer handles heavy materials easily and safely by means of a push-button controlled pneumatic cylinder. The multi-station transportable jib crane can be moved between different base sockets (one included) to enable use in multiple locations. The portable jib crane is ideal for transportation with a fork truck. It comes completely unassembled and includes instructions for filling the base with concrete upon assembly.
Display shelving helps you merchandise with artistic flair by making it possible to put your best products in the most prominent positions.If you own a small store competing with larger corporate retail chains, you can especially benefit from investing in display shelves because it makes your facility look more personalized and professional when you make the most of your existing space and take the time to plan your merchandising strategically.
There are two main categories of display shelving:double-sided shelving, also known as aisle shelving, and single-sided shelving, also known as wall shelving.
Aisle shelving is so named because it literally creates aisles for shoppers to walk down as they browse your merchandise.
Wall shelves offer smaller stores vital space conversion by transforming unused wall space into display merchandising areas.
It is common for storeowners to buy a combination of aisle and wall shelves proportionally to the dimensions of their interior walls in total square footage.Wall shelves are also heavily used by grocery and drug stores to create end caps on both ends of the aisle, creating special areas of attention to direct shoppers toward products on sales and special promotions that the retailer is running on any given day of the week.
Display shelving can also be a very important factor in minimizing loss prevention.When you cannot see what your shoppers are doing, the risk of theft is increased.To prevent this from happening in your store, we recommend that you use display shelves that are no more than 72�-84� in height.This allows for plenty of stock room to merchandise a large number of products but it still leaves enough room for employees, managers, and security cameras to see over the tops of the display.
You can purchase new and used display shelves in a wide number of colors, including gray, almond, black, caramel, light beige, and beige.The most popular color is almond, but this is solely a matter of subjective preference.The importance is how you use different heights and depths of display shelves to create as much merchandising space as possible within your store.The depth of an individual shelf can be as little as 12�, which typically preferred by convenience stores and gas stations selling snacks and emergency auto products.Larger stores such as grocery stores and hardware stores prefer 22� because it allows them to stock larger items.
Other benefits that you can obtain from display shelving include a range of vertical heights from 48� to 84� This allows you to purchase different size units that offer more precise fits to any number of locations within your store. All shelves regardless of wall or aisle design build measure 48� wide, allowing you a standard horizontal measurement to work with.Most individual shelves themselves will support up to 350lbs in weight and can be adjusted to create a �staggering� of depth from top to bottom.This allows light to more evenly distribute itself over the lower and bottom portions of your display.
Customization is king in the world of retail merchandising.Easy Rack will help you customize any and all of the units you order today to fit your exact space management needs.It helps us help you if you can email or send us either a blueprint of your store or photographs of its interior that will give us a visual frame of reference to work with.
Easy Rack stocks a vast inventory of commercial shelving, material handling equipment, commercial lighting, used pallet racks, and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with warehouses located throughout the United States.
Heavy Construction Equipment Easy Rack understands that customization is the key to safety, ergonomics, and success.Heavy construction equipment is used in so many different ways that the need to specialize and customize fork trucks, masonry tools, and skid-steers becomes readily apparent on an almost daily basis.Easy Rack heavy construction equipment and customization services are intended to make the tool you choose for the job the very best tool for that job.
Forklift
Forklifts attachments are OSHA compliant heavy construction equipment that transforms forklifts into loading platforms.Standard safety platforms allow the forklift to reach over obstructions too high for scissor lifts and other heavy construction equipment.They provide much wider platforms than boom lifts and can be elevated more rapidly than scaffold.
Skid-Steer
Skid-steer products allow you to customize your loading into a specialized piece of heavy construction equipment.Scoop and mix concrete mixers allow you to scoop up sand and gravel in the bucket position, then rotate for in-place concrete mixing.Hoppers allow you to clear debris from construction sites and landscaping projects.Root grapples and grapple buckets allow landscaping crews to clear and prepare properties for a new look.
Masonry
Easy Rack Masonry Equipment for Heavy Construction offers time and labor saving solutions to the builder. Mortar Buggies are an excellent way to move mortar into areas that cannot be accessed by forklifts. Brick Carts and Block Carts often save companies as much as 80% on labor cost to move brick and block. Nesting Forklift Mortar Tubs are easily to move, and they can be stacked stored with your forklift. In fact, all Easy Rack masonry heavy construction equipment combines rugged durability with portability and convenient storage.The Veneer Scaffold combines strength and light weight, is easy to set up, and requires no braces. Mortar Board and Plaster and Masonry Stands can be folded flat after used and stored easily.
You can outfit your forklift or your skid-steer with many types of forks.Forks get damaged to the point that they need to be replaced.Easy Rack carries replacement forks in brick, block and general purpose styles. Each style is specially designed for the designated purposes.Over the bucket forks allow you to use your skid steer vehicle as a forklift.These are fully forged, one-piece forks, not the kind made of two pieces of steel welded together.Over the bucket forks allow you to use your skid steer vehicle as a forklift.These are fully forged, one-piece forks, not the kind made of two pieces of steel welded together.Another add on for your skid-steer is the fork frame attachment that features bright red fork tips clearly visible for safety reasons, and a heavy duty tapered backstop that keeps the forks from swinging when picking up very heavy or odd sized loads.
Tow/Load/Haul
Heavy construction equipment often has to be moved by an individual worker.In order to make this as ergonomically compliant and safe as possible, special tow, load, and hauling tools are strongly recommended, especially when moving heavy construction equipment that is bulky or manufactured with disproportionate dimensions.Load and tows reduce customer wait time, cut labor cost by helping workers get the job done faster with little or no need for overtime, prevent back injury, and reduce damage to equipment.Ramps and steel loaded pins allow for easy and safe transportation via fork truck.
Easy Rack carries a wide variety of used pallet racks, commercial shelving, material handling equipment, commercial lighting,and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with warehouses located throughout the United States that enable us to service all 50 states including New York NY, Los Angeles CA, Miami, FL. Chicago, IL. Denver CO., New Orleans, La., Cleveland, Ohio, Kansas City, Mo., Mesa, Arizona, Virginia Beach, Va., Omaha, Nebraska, Oakland, California, Miami, Florida, Tulsa, Oklahoma, Minneapolis, Minnesota, Colorado Springs, Colorado, Arlington, Texas, Beaumont, Texas, Denton, TX, McKinney, Texas, Midland, TX, Killeen, Texas, Dallas TX, San Antonio, TX, Austin, TX, ALBQ, NYC, LA, MPLS
Hose Reels. Automactic Rewind & Elctrical Industrial & Commercial Garden, Air Pressure & Water Retractable Hose Reel.
Hose reels make it safe and easy to transport long hoses throughout a facility or across commercial grounds.Easy Rack hose reels are made exclusively in the USA and are used in everything ranging from delivery air, oil, water, to hydraulic rescue operations.Choosing the right hose reel for your application is simple if you follow the following six principles in making your selection.
1.Select your reel based on hose I.D., O.D., and Length
It is a good idea to always select a reel with a greater hose capacity than you actually require.Rewinding the hose onto the reel will be much easier, and the hose will also be more protected from the disc dimension.A slightly larger hose reel will also protect the hose even if the coils are not rewound in a uniform fashion.
2. Compare the size of your hose against the inlet and outlet sizes.
By reducing the size of the fitting and the hose, you allow for more capacity on the reel.If you have questions about –o-ring seal compatibility or special application requirements, call one of our specialists for detailed information and any necessary calculations to determine model type and specification.
3. Select a method of retraction that is safest and most convenient for your purposes
You can choose from spring Driven, hand crank or motor driven retraction.
Spring driven hose reels feature an automatic rewind that requires no power source.The operator can guide the hose or cord as it self-retracts and winds around the cylinder.
The hand crank hose reel requires manually cranking the reel and guiding the hose or cord evenly by hand.
Motor driven units will automatically rewind the hose, but they require an AC, DC, Air, or Hydraulic power source in order to operate.You can control the retraction of the hose with on/off switches and speed controllers while you manually guide the hose or cord back onto the reel.
4. Mounting Position is another key factor in reel selection.
Floor-ceiling mounts are standard in all models.Some series can be shipped in the wall truck mount position by request.Talk to an Easy Rack specialist about which mounting option works best for your situation.
5. Select the type of hose you will be using.
Factors such as operating temperature, product temperature, and PSI all play an important role in hose selection.Always use good quality hose rated for the service and operating pressure required. Poor quality hoses will expand and contract under pressure surges. When this happens, the hose that remains on the reel may bind and become difficult to handle. In extreme cases, poor quality hose may expand under pressure to the extent that the reel becomes distorted and inoperable.
6. Customize your hose reel.
We provide a number of ad on features such as roller brackets, special mounting brackets, carry handles, and carts.Talk to a material handling expert about which accessories will best customize your product to your process flow and facility needs.
Easy Rack carries a wide variety of shelves, dock loading equipment, commercial shelving, material handling equipment, commercial lighting, used pallet racks, and modular buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with regional distribution centers located in all 50 States including New York NY, Los Angeles CA, Miami, FL. Chicago, IL. Denver CO., Dallas TX, San Antonio, TX, Austin, TX, BoiseID, AtlantaGA, AlbuquerqueNM, Raleigh-DurhamNC, WashingtonDC, AlbuquerqueNM, HuntsvilleAL, FayettevilleAR, NorfolkVA , Madison WI.
In Plant Modular Offices Prefabricated Installation & Sales Nationwide.
If you have a busy manufacturing plant, and want to be able to manage operations efficiently, then there is no better place to be than in the heart of things. The traditional drawbacks of wanting to manage from within the main production area are that it can be difficult to find suitable space within an industrial environment for office areas, and that the processes of manufacture can be noisy and cause problems for office staff. By installing an in plant modular office, you can create a space within a space where you can combine the comfort and convenience of modern office space with a location that allows you full and instant access to the shop floor.
In plant Modular offices can be supplied to your exact specifications, and will allow you the ability to create a dedicated office space in the heart of your operations that will provide you with the space in which to work and run your business with easy access to the areas of the business that your decisions will directly affect.
Easy Rack have developed a reputation as one of the nations leading distributors of modular office solutions that can be constructed quickly and efficiently within your existing buildings in order to transform the capabilities of your business to organize space effectively.
Easy Rack uses only high quality materials in the construction of in plant modular offices, and thanks to the use of pre fabricated panels wherever possible, the building time of the system is minimized, meaning that the disruption to your business operations by the installation of the offices is as small as possible.
The nature of the in plant modular office systems provided by Easy Rack means that you can specify the exact space that you need, and then the office can be installed to meet your needs. No matter how many people that you need to accommodate, and the restrictions that are in place due to the amount of space available, the in plant office systems are designed to give you what you need.
One of the most important aspects of the in plant modular offices offered by Easy Rack is their flexibility. Rather than traditional systems, that are built and then fixed, the prefabricated panels that make up the modular units offered here can be repurposed very quickly to transform the office space for different purposes as and when required. A room can be constructed in one area, and then moved elsewhere very quickly after being disassembled.
A number of different variations on the basic in plant modular office systems are available to suit your needs. Standard one story installations offer accessible and easily installed solutions to your needs, while greater use of space can be achieved with a two story installation. When floor space is limited, a tower system that provides office space on an integrated mezzanine floor offers you the best way of adding space without having a negative impact on your production area.
Whatever system you choose, you can be sure that it includes all that you need to get the most out of your existing office space without needing to worry about anything apart from the furniture.
Easy Rack carries a wide variety of commercial shelving, material handling equipment, commercial lighting, used pallet racks, and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with warehouses located throughout the United States that enable us to service all 50 states including New YorkNY, Los AngelesCA, Miami, FL. Chicago, IL. Denver CO., El Paso, Texas, Dallas TX, San Antonio, TX, Austin, TX,
Easy Rack's low profile digital floor scale is only 3-1/2" off the floor, allowing easy loading and unloading of heavy equipment weighing up to 5,000 lbs. Durable design has a steel diamond tread-plate top surface. The LCD digital display stands 42" high and meets US standard 99-054 and Canadian standard AM-5318. Optional Approach Ramp for pallet truck accessibility - order two for drive-on, drive-off convenience.
Highly accurate, user friendly scales. These scales capture a stable weight reading in less than one second. Features a rugged aluminum housing, stainless steel weighing pan and a simple keyboard. Switches between lbs. and kgs. Operates on 120V AC
.
Material Handling Part Scales
Model
Platform Size
Capacity (lbs)
Resolution (lbs)
Net Weight (lbs)
PL-3
7.9"x9.5"
7.5
0.0005
13
PL-6
7.9"x9.5"
12
0.001
13
SL-12
9.5"x13.8"
30
0.002
21
SL-30
9.5"x13.8"
75
0.005
21
SL-60
9.5"x13.8"
120
0.01
21
Easy Rack carries a wide variety of commercial shelving, material handling equipment, commercial lighting, used pallet racks, commercial christmas lighting and modular buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with regional distribution centers located in all 50 States including New York NY, Los Angles CA, Miami, FL. Chicago, IL. Denver CO., Dallas TX, San Antonio, TX, Austin, TX, BoiseID, AtlantaGA, AlbuquerqueNM, Raleigh-DurhamNC, WashingtonDC, AlbuquerqueNM, HuntsvilleAL, FayettevilleAR, NorfolkVA , Madison WI.
Whether you need to install air flow machinery and industrial fans through the workplace to improve staff comfort or to ensure that solvent fumes are properly vented from the premises, the range of different industrial blowers and fans available means that any business can be sure of getting exactly the right equipment to get the proper balance of fresh air and comfortable temperatures that makes the workplace more comfortable.
The most basic kind of industrial fans are simply scaled up versions of the fan that you see on a desk. The difference of having more power of course means that the fan is more effective in pushing air through a larger environment without problems. A fan blade size of 24 or 20 inches means that these fans are more than capable of keeping a worker cool during the hottest part of the day.
You can choose from portable or fixed industrial fans. The advantage of a portable model is that it can be moved and used in the area where it is most required. As a worker moves from one place to another, they can take the fan with them. The major disadvantage of these fans is that they have a trailing wire which if not properly placed can be a tripping hazard for other workers. A fixed fan can generally be a little more powerful than a mobile model of the same size because it is fixed into place and more stable, although it is a less flexible solution in a dynamic environment.
For larger work areas, industrial blowers are a more appropriate tool for ensuring fresh air supply through the whole workplace. These stand alone fans, which boast fan blades more than 36 inches are ideally suited to an area where a lot of cooling is required. Blowers can generally be moved simply from one position to another as needed, making them perfect for an environment that can change rapidly.
In order to properly vent noxious gasses and dusts from an environment such as a paint shop or machining centre, proper precautions must be taken and the correct filtration should be used. An industrial fan used for extracting dust or solvent fumes from a building must by law be connected to the proper air filters. These will take any harmful chemicals and dirt out of the air as it flows through the system and ensure that the air released into the environment meets with all appropriate guidelines.
When an industrial fan or industrial blower is combined with a high performance air conditioning system, the work place environment will be improved for all staff. A cooler working environment will generally result in higher levels of productivity and activity amongst staff. This means that investing in the proper equipment to ensure a comfortable environment for staff will have sound implications towards increasing performance as well as improving morale and maintaining adherence to any appropriate legal and federal guidelines on air quality.
Easy Rack carries a wide variety of commercial shelving, material handling equipment, commercial lighting, used pallet racks, and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with regional distribution centers located in all 50 States including New YorkNY, Los AngelesCA, Miami, FL. Chicago, IL. Denver CO., Dallas TX, San Antonio, TX, Austin, TX, Boise ID, Atlanta GA, Albuquerque NM, Raleigh-Durham NC, Washington DC, Albuquerque NM, Huntsville AL, Fayetteville AR, Norfolk VA , Madison WI.
Many forms of industrial ladders exist to provide specialized and highly safe vertical mobility for virtually any manufacturing or shipping facility.Used correctly, industrial ladders convert the vertical cube into workspace with minimal risk of injury. Because industrial ladders not only improve efficiency, but also contribute to OSHA compliance and reduced risk of liability, they constitute a significant portion of any facilities inventory and rank among the most important tools essential to maintaining optimal, efficient operations.
Many warehouse and shipping facilities call for portable industrial ladders that can be moved quickly without injury, damage, or operations slow-down.Carrying standard ladders across workspace is not only cumbersome and slows down the pace of labor, but it is also highly dangerous around machinery.Rolling warehouse ladders are much easier to move across large spaces and can easily fit against shelving, walls, and mezzanine systems.Our average rolling ladder rates at 340lbs capacity and features a variety of grips and step styles to maximize balance while climbing.These industrial ladders meet with full OSHA and ANSI a14.7 safety regulations and feature 10? wheels for quick mobility and anti-skid stops, slip resistance, and step lock.
In tighter quarters with limited storage space, rolling warehouse ladders may block access to vital supplies and storage areas.For smaller facilities and storage areas, Easyrack provides telescoping industrial ladders that workers can adjust to required lengths quickly and with full safety compliance with OSHA and ANSI.Telescoping industrial ladders feature steps with serrated surfaces and spring-loaded locking pins that prevent adjustments from slipping once set.Rubber feet and bumper guards on top of the ladders provide additional grip and prevent damage to surrounding walls and supporting floors.
For more specialized work in and around docks, Easyrack carries ?walk through? style industrial ladders that weld or bolt to dock walls and extend sufficiently far away from the dock wall that workers can safely walk through them.For roof access and when working in large structures with extremely high vertical space, Easyrack carries fixed industrial ladders made from galvanized steel.These fixed ladders also bolt directly into the wall and provide maximum grip and climbing surface.
Easyrack carries a number of smaller ladders equally valuable to commercial clients and to homeowners.Our stepladders feature the lightest and strongest grade aluminum, rated from 200-250 lbs, and our folding ladders feature steel construction with powder coat finish and 250 lbs weight capacity.Rubber feet at the base of the ladder provide extra grip and prevent slippage.Stepladders are lightweight and easy to carry and prove ideal for light maintenance work, painting, and wiring work on low ceilings.Stepladders serve as ideal industrial ladders and are also the favored choice for homeowners looking for professional grade materials.
Industrial ladders are key components to any company?s inventory.Choosing the right ladder for the right project not only saves on time, but also may save lives.Call Easyrack today at 1-888-776-3720 and we will answer your questions and help you find the right industrial ladders for your needs.
Easy Rack carries a wide variety of commercial shelving, material handling equipment, commercial lighting, used pallet racks, and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with regional distribution centers located in all 50 States including New YorkNY, Los AngelesCA, Miami, FL. Chicago, IL. Denver CO., Dallas TX, San Antonio, TX, Austin, TX, Boise ID, Atlanta GA, Albuquerque NM, Raleigh-Durham NC, Washington DC, Albuquerque NM, Huntsville AL, Fayetteville AR, Norfolk VA , Madison WI.
One of the key responsibilities for any business owner is to ensure that all staff in the workplace enjoy the best protection from accidental injury. By providing the proper safety equipment wherever it is required, the chance of any member of the workforce falling victim to an industrial accident can be minimized.
Depending on the exact nature of your business, the safety equipment required for the optimum protection of staff will differ, and there is no one size fits all solution to creating a secure environment for your workforce. Precautionary measures that prevent people getting too close to machinery, combined with a safety conscious mindset will reduce the incidence of industrial accidents, and as a result reduce unwanted workplace costs to cover compensating employees who get injured.
When installing safety equipment through your facility, consider what is necessary and always err on the side of caution – investing in additional protection for staff could pay dividends in reducing liability later. Choose high visibility guards wherever possible to ensure that there is a visible as well as physical deterrent to prevent staff getting too close to machinery, and wherever there is a drop, such as on a loading dock, make sure that a barrier is put in place.
One area where safety equipment should never be overlooked is in areas where people and forklift and other mobile equipment can come into contact. Ensure that bollards are properly fitted into place in order to prevent trucks getting into areas where they might catch staff, and consider placing speed bumps across any walkways.
There are certain legal requirements to fulfill in fitting out your workplace to protect staff as much as possible, and guidelines have but in place to set out the kind of minimum specifications for any safety equipment that you install. For example, safety fences should be a minimum of 42 inches high in order to provide proper protection, and come with a half height safety rail to prevent any incidences of people sliding through the gaps.
Beyond basic installation of barriers to protect staff from accidental injury as a result of falling or straying into dangerous areas, there are many other considerations to be included in formulating your workplace safety strategy. Any potentially harmful chemicals such as solvents, poisons or flammable liquids must be secured in flame proof cabinets. Protecting dangerous or volatile chemicals from coming into contact with a flame is essential to minimize the risk from serious fire damage.
By thoroughly protecting all areas of your working environment and providing staff with appropriate safety equipment and clothing will pay long term dividends to a business in reducing absenteeism through injury and any attendant costs this incurs. It will also ensure that you carry out all legal requirements for workplace safety and are fully indemnified in terms of an accident that causes personal injury.
As you continue to read through our selection of industrial safety equipment, keep in mind we stand ready to answer any questions you may have about our offerings.
Easy Rack carries a wide variety of commercial shelving, material handling equipment, commercial lighting, used pallet racks, and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with warehouses located throughout the United States that enable us to service all 50 states including New YorkNY, Los AngelesCA, Miami, FL. Chicago, IL. Denver CO., El Paso, Texas, Dallas TX, San Antonio, TX, Austin, TX, Boise ID, Atlanta GA, Albuquerque NM, Raleigh-Durham NC, Washington DC, Albuquerque NM, Huntsville AL, Fayetteville AR, Norfolk VA , Madison WI., Corpus Christi, TX, Plano, Texas, Garland, TX, Laredo, Texas, Lubbock, TX
New & Used Metal Industrial Shelves / Open & Closed Commercial Steel Shelving Units, Made In The USA!
Easy Rack is an established shelving company that manufacturers quality, made in the USA new and used industrial metal shelving products. We are proud to offer quality Industrial metal shelves as well as Widespan Industrial Shelvingunits.
Our metal shelving comes in different gauges of steel. The thicker the gauge the more weight an industrial shelf can hold. Easy Rack makes shelving from 20 gauge and 12 gauge steel. the Class 0 is made from 20 gauge prime cold rolled steel and the Class I is made from the same rolled steel but is 18 gauge. Both are iron phosphated then painted with a baked on enamel. The Class I-A industrial shelving has an added 12 gauge angle bar 1 1/2" x 1' in the front flange. This added front adds strength to the shelving unit allowing for climbing or rough handling. The Class II has front and back 1 1/2" x 1" reinforcement made of 12 gauge steel. This gives the shelf greater load capacity. Class III has the same front rear and back reinforcements as the class II however an additional reinforced steel hat section is welded under the entire length of the shelf.
Industrial Shelving is available in a large variety of sizes as well as open and closed back shelving units. Weight capacity on units can vary from 450 pound up too 2000 pounds. Industrial Shelving is made up of several components: Post, End Sheets, Back Sheets, End Braces, Back Braces, Shelf Dividers, Full Length Dividers, Bin Front, Shelf Reinforcements. Shelf Clips, Base Strips, Angle Corner Braces or Gussets and Pos Slice plates.
Open Industrial Commercial Steel Shelving units are available in 5 , 6, 7 , 8, 9 and 10 Shelf units. The Sizes of the units vary from 36X12X85 to 48X36X85. Open Shelving Units are a great way to organize your office space as well as a warehouse space. It is important that you choose the right shelving to do the Job. Don't be fooled by cheaply made units like the ones you will find at Home Depot. They are cheaper but also much weaker then our units. If you need a serious industrial shelf that is made in the USA by quality craftsman that have been manufacturing industrial metal shelving then Easy Rack is the way to go. Closed Shelving units are also available. We currently offer 5, 6, 7, 8, 9, and 10 shelf units. Available sizes are 36X12X85 to 48X36X85.
Widespan Commercial- Industrial Shelving units are very useful for storing larger items in a warehouse. This type of shelving is quite sturdy and can handle heavier loads. All the material used in Widespan units is treated with iron phosphate which is then painted with a baked on enamel. These units are available in 3 to 6 levels and sizes vary from 36X12X84 to 96X48X84. For details on exact sizes please visit our online catalog and find the right size to fit your needs. Widespan shelving units are usually decked with 5/8 particle board. We can supply you with the particle board or you may find it locally if you like.
We can have any of our units shipped directly to your door saving you the need to pick up and deliver them yourself.
Easy Rack's indoor and outdoor commercial LED lighting fixtures can play a very important role in reducing overhead by lowering insurance premiums with security lights, saving energy by using LED or fluorescent light fixtures and bulbs, helping warehouse workers accurately select products and purchasing durable long lasting light fixtures that reduce replacement costs.
An additional significant dynamic to be considered when choosing industrial lighting fixtures is the lighted area footprint (area of space to be lighted). The main purpose of Commercial lighting fixtures is to cover the specified work area effectively without adversely affecting employee performance in any way. Commercial lighting differs according to the area they cover. If the area is small, custom engineered lights can be located at the main work stations that adapt to changing lifestyles and needs. Custom lighting fixtures are available with different, wattages, sizes and finishes that can match any kind of decor.
LED Commercial exterior lighting systems by Easy Rack are installed to comprehensively illuminate the entirety of buildings and properties at industrial, manufacturing, and retail facilities. Investing wisely in the right commercial exterior lighting saves power, improves security, increases the attractiveness of your location, and perhaps most importantly, keeps your operation in full compliance with all federal, state, and municipal regulatory codes.
Easy Rack’s inventory of LED commercial exterior lighting fixtures and supplies is designed to provide you with a one-source solution for all commercial lighting needs, and Easy Rack specialists stand ready to help you design your system and coordinate installation upon request.
LED Security Lights
Installing commercial exterior lights around the perimeter of your property has many benefits. Security lights work as a deterrent to vandalism, burglary, and criminal mischief. A number of insurance carriers may also offer-discounted premiums if you install the right commercial exterior lighting in your security system. HID lights are among the most powerful fixtures of this type, and can be integrated with automated controls and existing alarm systems.
While the main purpose of commercial outdoor lighting is to provide a much better environment for people to work and live in particular areas during the hours of darkness, it is also important to ensure that the lighting solution that you provides includes certain aesthetic elements that can enhance and improve the area around your building, and create a much more positive environment for customers and employees alike.
The appearance of the outside of your business premises can be transformed through the use of attractive commercial outdoor lighting, and by choosing and designing a system that complements your buildings, you can get the effect that you want without having to impact on the overall cost of the installation. By utilizing the selection of different products available from Easy Rack and taking advantage of the advice available from specialist lighting engineers, you can create the best possible commercial outdoor lighting system to meet the needs of your business.
LED Parking Lot Lighting, Parking Lot Light Poles & Fixtures.
A potential customer's experience begins and ends in the parking lot. If the parking lot is not lighted and secure, especially at nighttime, patrons will not stop, park or shop. That's why major businesses make certain that nothing prevents possible shoppers from entering their stores. Parking lot lights solve this problem by bringing security through visibility to sidewalks, parking lots, streets, parks and many other applications that could benefit from outdoor lighting and light poles.
Our series of commercial parking lot lights are constructed of formed aluminum that brings a contemporary look and feel to your business or commercial warehouse. All lighting fixture seams are welded and silicone sealed for a weather tight seal allowing these outdoor light fixtures to stand up to the worst weather. Conveniently outfitted with a hinged door for easy access, these light fixtures are flexible enough to be mounted on walls as well as parking lot poles. Add this to the variety of optics and accessories available and the Easy Rack parking lot light series is the best place to start when looking for parking lot lighting and security light fixtures.
The loading dock is the sharp end of any company's operations, the place where your business meets the outside world. Investing in the right loading dock equipment on hand for loading and unloading deliveries means that the goods will arrive at their final destination in the best possible condition, and that will translate into savings.
There are numerous components that go into making the distribution operation run smoothly, and all of the different parts of the jigsaw fit together to make the operation more efficient, and safer, reducing the incidence of accidents, increasing the protection offered to both goods and staff, and also make the whole loading and unloading process a lot faster.
One of the most important pieces of loading dock equipment that your business will invest in is the dock seal or shelter. The idea behind a dock seal is to allow for loading and unloading to take place in all weather conditions. The truck will be able to reverse right back up to the wall, and into the shelter, allowing staff to get access to the back without worrying about slipping on wet surfaces.
In situations where the dock is not at the same level as the bed of trucks that need to be loaded and unloaded, there are a number of different solutions available to make the loading process as simple and convenient as possible.
The simplest option available is a dock board. Easy Rack offer a number of different options to make sure that the loading dock equipment that you buy is right for your business. From the simplest ramp through to heavy weight units that are able to carry the weight of a forklift. The Dock board stretches between the dock and the back of the truck and allows for easy access.
In situations where the height of the truck beds on delivery vehicle varies greatly from the dock and where it is important to get the fastest possible turnaround on deliveries, then a dock leveler is the ideal piece of loading dock equipment. With a high powered lift and the capacity to support particularly heavy weights such as fork lifts, dock levelers will allow for a flexible system to be installed that will allow your distribution center to accommodate a wide range of different vehicles.
When a dock is unavailable, loading need not be inhibited. Under circumstances where you lack the capacity to load a truck through the dock, aluminum and steel yard ramps will allow for easy access to the rear of the vehicle from ground level.
Other pieces of loading dock equipment that are considered essential include trailer stabilizing jacks that can be used to keep trailers steady and level after the tractor has been released, and chocks to stop vehicles from moving and causing problems. For lifting equipment and materials into a truck from ground level, a truck scissor dock lift is the perfect solution, and versions able to carry up to 12,000lb are available.
IN order to ensure that material loaded into the rear of a truck or container is safe in transit, having a good stock of cargo bars that can be fitted in a variety of different trucks is essential, and ensures that your business is able to avoid costs incurred from goods being damaged in transit.
As you continue to read through our selection of Loading Dock Equipment, keep in mind we stand ready to answer any questions you may have about our offerings. Call us at 1-888-776-3720 whenever such questions arise and let us help you make the best investment within your budget. We are located in Houston, Texas.
Easy Rack carries a wide variety of commercial shelving, material handling equipment, commercial lighting, used pallet racks, and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with regional distribution centers located in all 50 States including New YorkNY, Los AngelesCA, Miami, FL. Chicago, IL. Denver CO., Dallas TX, San Antonio, TX, Austin, TX, Boise ID, Atlanta GA, Albuquerque NM, Raleigh-Durham NC, Washington DC, Albuquerque NM, Huntsville AL, Fayetteville AR, Norfolk VA , Madison WI, Jersey City, NJ Newark, New Jersey.
Loading Ramps, Commercial & Industrial Truck Dock Loading Ramps Loading ramps act as bridges between buildings or docks, and
truck beds. Loading ramps can be found in every industry and are used in a wide range of market places.They are engineered to make the loading and unloading of trucks as safe and expedient as possible.Some loading ramps are intended to be used specifically for rail cars, but the majority of them are manufactured for trucks and trailer beds.In certain instances, specialty loading dock equipment such as wheel risers and steel platforms may also need to maximize safety and process flow.
Dockboards. Dockboards are loading ramps that span the gap between the dock and the truck and make loading and unloading safe. They are designed to support power equipment such as fork trucks. Dockboards are built with curbs on the sides that prevent vehicle runoffs and provide additional structure and weight capacity.Because they must support vehicles as well as products and workers, most models are made from heavy duty steel, although Easy Rack does supply lightweight aluminum models when appropriate and requested.Capacities range from 6,000 to 40,000 lbs.
Aluminum Dock Plates A / B Plates made are manual loading ramps made from high grade "diamond deck" aluminum.They are somewhat similar in design to dock boards, but they are not to be confused with them.Dockplates are to be used only with manual loading on hand trucks or pallet jacks.
These loading ramps are used in high docks that constructed without pit mounted levelers.They are ideal for truck traffic, LTL, and fork truck traffic that is from 5� below dock level to 5� above dock level.A unique design features molded bumpers and a mechanical spring operation that takes heavy work out of the lifting and helps ensure that the unit is correctly positioned each time it is used.
These loading ramps are used for loading trucks from the ground, either because there is no truck high dock present, or because there are more trucks than docks.Yard ramps are portable and can be towed with a forklift. A hydraulic pump allows the height of the yard ramp to be adjusted, and deep side members prevent forklift runoff.
These loading ramps offer an economical solution when the target height is � or less that of normal dock heights (generally 33� or less).Minis can be used with manual equipment and fork trucks.Capacities start at 12,000 lbs and range upward.The mini ramp can be shipped with an optional mobility package that allows the unit to be relocated without a hydraulic actuated undercarriage.Capacities start at 12,000 lbs with standard and custom sizes available.
These aluminum loading ramps are designed for foot traffic, hand trucks, and pallet jacks moved by hand. Standard lengths run from 3' to 16'and two widths of 29" or 39".
Additional Loading Dock Equipment:
Steel Platform Portable Docks Steel Platforms allow facilities to enlarge their dock areas incrementally by installing platforms one at a time or by ganging them together to create a significantly larger dock space for loading and unloading.Capacities begin at 16,000 lbs.
If the dock is too high for incoming trucks, unloading and loading the truck can be hazardous and time consuming.Wheel risers are small ramps that fit under truck wheels so the bed of the trailer can be positioned properly above dock for safer and faster loading.
Easy Rack carries a wide variety of loading ramps used pallet racks, commercial shelving, material handling equipment, commercial
lighting, and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you.
Easy Rack carries a wide variety of commercial shelving, material handling equipment, commercial lighting, used pallet racks, and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with warehouses located throughout the United States that enable us to service all 50 states including New YorkNY, Los AngelesCA, Miami, FL. Chicago, IL. Denver CO., El Paso, Texas, Dallas TX, San Antonio, TX, Austin, TX, Boise ID, Atlanta GA, Albuquerque NM, Raleigh-Durham NC, Washington DC, Albuquerque NM, Huntsville AL, Fayetteville AR, Norfolk VA , Madison WI., Corpus Christi, TX, Plano, Texas, Garland, TX, Laredo, Texas, Lubbock, TX
If you are looking to expand your business, and want a quick solution to the problem of gaining more space, then purchasing pre manufactured prefabricated buildings for installation alongside the rest of your premises will offer you the perfect opportunity to gain space at a relatively low cost, and also avoid the extensive waiting period that is involved in regular construction projects.
With manufactured prefabricated buildings, you are able to avoid the lengthy process of hiring an architect and going through the whole design process.Instead, you are simply able to order the exact floor space that you need, and take advantage of the experienced staff at Easy Rack, who can advise you on the exact systems that you need to meet your needs.Then, once you have chosen the system that you need for your business, you can simply order it, and it will be delivered ready to be built.The building will arrive in the form of a kit of fully finished components that simply need to be fitted together in order to provide new accommodation in a fraction of the time taken to build a similar sized office using traditional techniques.
With manufactured prefabricated buildings such as those provided by Easy Rack, the main advantage is that the systems are completely modular.The various components can fit together in a number of different ways in order to provide you with the exact system that you need, and then, if your requirements change over time, alterations can be made simply and in a cost effective manner.Modular construction provides you with the most flexible office space possible, and will allow you to grow at your own pace without having to worry about the headaches of obtaining more space in the long run.
As your business needs change over time, you will be able to add more space, break down the existing office into smaller areas, repurpose space for meeting rooms, and even build additional stories on top of your existing office simply by ordering the required components from your supplier, and then making the necessary changes to your building.
Couple this flexibility of manufactured prefabricated buildings with the fact that the construction process is so much cleaner than traditional methods, and you get accommodation that is ready much faster, and without any of the negative aspects of building such as the immense amounts of dirt, dust and other waste that the process creates.You simply need to put the various components together, and your new building is ready to furnish – the manufactured prefabricated buildings available from Easy Rack even come fully painted to a professional standard to fit in with the color schemes of the rest of your buildings.
One of the main advantages of manufactured prefabricated buildings comes in the form of the fantastic tax benefits that you get from them.Rather than depreciating over a period of 39 years as traditionally constructed buildings do, modular buildings depreciate over a 7 year period, which means that you get a big annual benefit to your company’s tax bill to reflect the ongoing cost of the buildings.
Easy Rack carries a wide variety of commercial shelving, material handling equipment, commercial lighting, used pallet racks, and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with warehouses located throughout the United States that enable us to service all 50 states including Memphis, Tennessee, Baltimore, Maryland, Irving, Texas, Amarillo, TX, Brownsville, Texas, Grand Prairie, TX, Pasadena, Texas, Fort Worth, Texas., El Paso, Texas., Charlotte, N.C, Milwaukee, Wisconsin, Seattle, Washington, Boston, Massachusetts, Denver, Colorado, Louisville-Jefferson County, Kentucky.
There are many different forms of material handling equipment that fulfill many different roles within a factory or warehouse environment.From gantries for moving heavy loads around through to pallet jacks and hand trucks for standard loads, the range of different products available to make it easier to manage your inventory and handle materials properly throughout your facilities is large enough to ensure that no matter what the job is, there is a specialist tool to get it done.
Using the right material handling equipment at all stages of your production and storage processes means that you will be able to put in place the most efficient systems within your business and this will allow you to exercise greater control over the way stock is handled in order to reduce wastage and loss through damage.This can have a major impact on the profit levels of your business, as greater productivity with fewer losses caused by inefficiency will mean that your business will be able to reduce operational costs and also raise the levels of revenue that it can achieve.
We stock an extensive range of material handling equipment for all your needs.One area that the are particularly well known for is their range of pallet storage solutions including various types of shelving and rack storage to ensure that larger items and bulk materials can be stored in an ordered fashion to make internal distribution much simpler, as well as a good deal safer for staff.
An extensive range of lifting supplies including gantries and jib cranes form the heart of our range of material handling equipment, and ensure that no matter what weight of goods you need to lift there is a piece of equipment in place that can support the load safely and effectively.The range includes all the industrial cranes that you could need including a full selection of hoists to meet any needs.
Many items within a factory or other industrial environment need special care to be taken when they are moved around, and in order to ensure that this is done, the correct equipment is required.From specially shaped forklift extensions that have been designed to support particular loads such as oil drums through to hoppers that are used for moving around heavy loads of powder or other bulk items, the range of material handling equipment needed by a business will depend on the actual work that the company undertakes.No matter what your needs are, you will find exactly the equipment that your business needs to succeed in our extensive inventory, as well as being able to take advantage of our expert advice about implementing the right solution for your business.
Easy Rack carries a wide variety of commercial shelving, material handling equipment, Steel Security Folding Gates, used pallet racks, and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with regional distribution centers located in all 50 States including New YorkNY, Los AngelesCA, Miami, FL. Chicago, IL. Denver CO., Dallas TX, San Antonio, TX, Austin, TX, Boise ID, Atlanta GA, Albuquerque NM,
Easy Rack provides material handling equipment used for the movement and storage of material and products within a facility or at a site. We carry a large selection of new and used material handling equipment and dock loading equipment that streamline process flow, reduce man hours, and contribute to an overall safe work environment. When estimating budgets and looking for ways to reduce overhead, procurement managers should seriously factor in the tangible financial benefits that the right material handling equipment can deliver to plant and warehousing operations.
In almost all sorts of industrial facilities, product mobility determines volume shipped on time that in turn directly impacts the accounts receivable invoice. By replacing manual lifting and carrying with material handling equipment designed to get the job done quicker and more easily, manufacturers reduce the risk of costly injury and possible litigation and increase their delivery power to the open market. Easy Rack carries both essential and specialized material handling equipment designed to move product safely and quickly across floor space. We carry hand trucks & standard dollies, and pallet jacks for normal-size pallets and crates. We also supply specialty material handling carts and utility carts that prove very effective in moving specialized and sensitive equipment. For larger payloads too difficult to move safely with muscle alone, we also carry the latest models in electric pallet jacks and gasoline powered pallet trucks to provide that extra bit of power needed to avoid injury and quickly move materials without delay or damage.
Easy Rack knows that shipping and receiving is the lifeblood of the industrial world. Inefficiently run loading docks and unsafe working conditions can stagnate process flow a little at a time, causing profits to slowly dwindle away until a significant loss appears at the end of the year on the annual report. Operations managers can ensure this doesn?t happen by investing in material handling equipment specifically designed for the loading docks. With forklift attachments and strapping machines, loading and unloading odd-sized payloads and fragile equipment with reduced risk of dropping and breakage. With more automated and streamlined movement of products, operations can expect quick and noticeable ROI on their investments in material handling equipment. Products such as floor scales and stretch wrap machines can integrate packaging into the shipping process and significantly reduce man hours that often run into costly overtime any time a new launch hits the market.
Material handling equipment can even increase available workspace by converting the unused vertical cube between floor and ceiling space into a busy corridor for product and supply movement and storage. With heavy-duty material handling equipment such as bridge cranes and jib cranes, assembly lines and storage facilities can move products with three-dimensional handling previously available only in human hands. Our material handling equipment inventory also features lift tables and cantilever hoists with a load capacity engineered to move the heaviest and most awkward items rapidly and safely with greatly reduced risk of product damage and human injury.
Easy Rack offers a complete inventory of material handling equipment, used pallet racks, and modular buildings installed nationwide. Our wide selection of both new and used material handling equipment offers a safe and economical way for employees to efficiently do their jobs on a day-to-day basis. The tangible benefits companies can count on receiving in return for their investment is improved time to market, reduced risk of injury and subsequent insurance costs, and reduced and possibly eliminated overtime, all of which drive overhead down and profits up.
Easy Rack carries a wide variety of commercial shelving, material handling equipment, used pallet racks, and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with regional distribution centers located in all 50 States including New YorkNY, Los AngelesCA, Miami, FL. Chicago, IL. Denver CO., Dallas TX, San Antonio, TX, Austin, TX, Boise ID, Atlanta GA, Albuquerque NM, Raleigh-Durham NC, Washington DC, Albuquerque NM, Huntsville AL, Fayetteville AR, Norfolk VA , Madison WI.
American Production & Inventory Control Society 5301 Shawnee Rd. Alexandria, VA 22312-2317 800-444-APICS (2742) 703/354-8851 FAX 703/354-8106 http://www.apics.org/
Association for Logistics Outsourcing 2800 River Road, Suite 260 Des Plaines, IL 60018 847-813-4699 847-813-0115 http://www.iwla.com/
Automatic Identification Manufacturers, Inc. 634 Alpha Dr. Pittsburgh, PA 15238-2802 800/338-0206 FAX 412/963-8753 www.aimglobal.org
College-Industry Council on Material Handling Education 8720 Red Oak Blvd., Suite 201 Charlotte, NC 28217-3992 704/676-1190 FAX 704/676-1199 http://www.mhia.org/et/ET_MHI_CICMHE_Home.cfm
Conveyor Equipment Manufacturers Association 6724 Lone Oak Blvd. Naples, FL 34109 941/514-3441 FAX 941/514-3470 www.cemanet.org
Council of Supply Chain Management Professionals 2805 Butterfield Rd., Suite 200 Oak Brook, IL 60523 630/574-0985 FAX 630/574-0989 www.cscmp.org
Institute of Packaging Professionals 481 Carlisle Drive Herndon, VA 22070-4819 703/318/8970 FAX 703/318/0310 http://www.iopp.org
Industrial Distribution Association Three Corporate Square, Suite 201 Atlanta, GA 30329 404/325-2776 FAX 404/325-2784 www.ida-assoc.org
Industrial Truck Association 1750 K Street NW, Suite 210 Washington, DC 20006-2305 202/296-9880 FAX 202/296-9884 www.indtrk.org
Institute of Electrical & Electronics Engineers, Inc. 345 E. 47th Street New York, NY 10017-2394 212/705-7900 FAX 212/752-4929 http://www.ieee.org/
Institute of Industrial Engineers 25 Technology Park/Atlanta Norcross, GA 30092 404/449-0460 FAX 404/263-8532 www.iienet.org
Machinery and Allied Products Institute 1200 18th Street NW, Suite 400 Washington, DC 20036 202/331-8430 FAX 202/331-7160 http://www.mhia.org/
Material Handling Education Foundation, Inc. 8720 Red Oak Blvd., Suite 201 Charlotte, NC 28217-3992 704/676-1190 FAX 704/676-1199 http://www.mhia.org/et/ET_MHEF_Home.cfm
Material Handling Equipment Distributors Association 201 Route 45 Vernon Hills, IL 60061 847/680-3500 FAX 847/362-6989 www.mheda.org
National Electrical Manufacturers Association 2101 L Street, NW, Suite 300 Washington, DC 20037 202/457-8400 FAX 202/457-8411 www.nema.org
National Fire Protection Association One Batterymarch Park P.O. Box 9146 Quincy, MA 02269-9146 800/344-3555 FAX 617/984-7057 http://www.nfpa.org/
National Wooden Pallet & Container Association 329 South Patrick St. Alexandria, Virginia 22311-3501 703/519-6104 FAX 703/519-4720 www.nwpca.com
Society of Manufacturing Engineers One SME Drive, P.O. Box 930 Dearborn, MI 48121 313/733-4763 FAX 313/271-1500 www.sme.org
Warehousing Education & Research Council 1100 Jorie Boulevard, Suite 170 Oak Brook, IL 60521 630/990-0001 FAX 630/990-0256 www.werc.org
Metal Buildings Offer Considerable Advantages Over Conventional Construction
Metal buildings offer significant advantages over standard constructions in the areas of quality assurance, design process, and application power. The single-source of design, production, and turn-key installation allows us to deliver a superior product that is consistently more cost effective than traditional alternatives. A few examples of key advantages follow:
Quality Assurance
•All materials inspected before build-out begins
•Constructing your prefabricated structure in a controlled factory environment allows us to avert the potential mishaps that often result from inclement weather, theft, or vandalism
•In-house quality control staff measure quality assurance through a series of benchmarks both during and after construction is completed
•Skilled, experienced workers familiar with all design builds and highly competent in customization build-outs.
•Superior lifespan for materials used
Design Advantages
•A basic, standard design for all metal buildings can be customized to produce any type of in plant, exterior, or security structure
•Drawings are done to specification, and in-house team builds according to drawing.
•Minimal setup time and focused, organized, in-house workforce—no layers of subcontracting to coordinate
•Customization is done in-house by staff design specialists. This eliminates the expenditures involved in outsourcing to architectural specialists.
•A reliable contractor or multiple trades must be located and coordinated for each project
•Designs are developed for rapid production and economic solutions to client needs.
•Eliminates bid time by moving all aspects of design-build in-house and developing solutions specific to client requirements.
•Complete detailing package: including specifications and all components necessary to place
Application Advantages
•Prefabricated structures can be used for in-plant offices, exterior structures with a variety of purposes, or specialized security facilities
•Basic designs allow companies to purchase as-is indoor, outdoor, and security structures as far less expense than standard construction options can offer.
•All metal buildings are relocatable. Smaller structures are portable.
Easy Rack carries a wide variety of commercial shelving, material handling equipment, commercial lighting, used pallet racks, and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with warehouses located throughout the United States that enable us to service all 50 states including New YorkNY, Los AngelesCA, Miami, FL. Chicago, IL. Denver CO., El Paso, Texas, Dallas TX, San Antonio, TX, Austin, TX, Boise ID, Atlanta GA, Albuquerque NM, Raleigh-Durham NC, Washington DC, Albuquerque NM, Huntsville AL, Fayetteville AR, Norfolk VA , Madison WI., Corpus Christi, TX, Plano, Texas, Garland, TX, Laredo, Texas, Lubbock, TX
Easy Rack offers design application capabilities ranging from small, single-level modular offices, to multi-level modular complexes, fully integrated mezzanine systems, and irregular shaped wall systems. We offer a nearly unlimited choice of sizes, colors, configurations, and special options without jeopardizing our customers' tight budgets and delivery schedules.
Easy Rack carries a wide variety of material handling equipment, commercial lighting, used pallet racks, commercial christmas lighting and modular buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with distributors located in all 50 States including New York NY, Los Angeles CA, Miami, FL. Chicago, IL. Denver CO., Dallas TX, San Antonio, TX. and Austin, TX.
Within any industry there are processes that are delicate, and the presence of any foreign objects or pollution can have a major impact on their efficiency.Under circumstances where you are working with products that require special care to be taken, it is important to be able to provide a location where you can control all aspects of the environment to protect your systems.There are a number of systems to choose from depending on the levels of protection your processes need, and thanks to the modular system of construction offered by Easy Rack, you can have a commercial modular clean room or environmental room installed within your existing factory at a fraction of the cost that you might expect.
With any environmental room, there are a many factors that can be controlled, and these include everything from the temperature and humidity through to the amount of particulate matter that is allowed in the air.By being able to control all of these variables, it is possible to create a completely stable environment in which the optimum conditions for a process to be carried out most efficiently and safely can be created.An environmental room must, by definition be a completely separate part of the building, with its own air supply and the walls must be perfectly fitted to prevent any leakage.Thanks to the high quality of the installations of commercial modular environmental rooms from Easy Rack, you get the best quality of materials, and a room that can be fitted quickly, and be up and running as soon as it has been fully tested.
A clean room takes the essence of a regular environmentally controlled room even further, adding a number of additional features to further refine the capabilities that are present.You need a clean room when your business is involved in working with very delicate equipment such as integrated circuits, or if you need to prevent any contamination at all taking place.
A clean room comes with a staging area where staff can change into specially prepared clothing that prevents them carrying any dust or other contamination into the room.
The most important factor to examine when looking for a Commercial modular clean room installation is to check whether the system that would be installed in your workplace is full sealed and comes with comprehensive air filtering.Easy Rack offer a fully customizable clean room solution for your business that takes into account a wide range of different factors including the materials that are used for the construction and lining of all the walls, the power systems that are installed into the room, and even the kind of HEPA filters that are included.All the commercial modular clean room installations that Easy Rack provide are engineered to allow the roof to be loaded, which allows for event greater flexibility and space saving.
If you are considering your options when it comes to Commercial modular clean room sales, then remember that Easy Rack provide a system that can be installed much more quickly and efficiently than rival products, and that thanks to the special tax status afforded to products that are built in a modular fashion, the item will depreciate over 7 years rather than 39, which will provide you with a number of taxable benefits over the lifetime of the product.
As you continue to read through our selection of Modular Prefab Clean Rooms, keep in mind we stand ready to answer any questions you may have about our offerings. Call us at 1-888-776-3720 whenever such questions arise and let us help you make the best investment within your budget.
Easy Rack carries a wide variety of commercial shelving, material handling equipment, commercial lighting, used pallet racks, and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with warehouses located throughout the United States that enable us to service all 50 states including New YorkNY, Los AngelesCA, Miami, FL. Chicago, IL. Denver CO., El Paso, Texas, Dallas TX, San Antonio,
One of the biggest investments that you will have to make when building a new factory is in the freezer or cold storage area. Quite often, the reason for this high cost is the fact that major changes to the industrial building have to be made in order to contain the cold. To avoid having to make major changes to the structure of your existing building, a much better options would be to install a modular cold storage building.
Self contained modular cold storage buildings provide a complete solution for your cold room needs without the need to change the structure of the building. These units can be moved with a fork lift and can be installed either inside your existing facility, or in a suitable outdoor location.
There are a number of reasons why your business may need to invest in a cold storage area. Perhaps you work with a lot of volatile chemicals that cannot be stored at high temperatures, or perhaps you simply need an environment where the temperature can be controlled within very specific limits. Whatever reason you have for wanting a walk in freezer or cold storage room, Easy Rack will be able to custom design and install the perfect solution for your needs and supply you with the necessary equipment.
We work with the leading manufacturer of modular cold storage buildings to offer a comprehensive range of cold room products to suit your exact needs. Recognizing that every business has its own requirements, we will produce a custom installation plan that will provide you with the exact facility to meet your needs.
We work to the highest possible standards, and make use of only top quality materials and components in the construction and installation of modular cold storage buildings, so when you buy from us, you can be sure of getting the best possible cold room for your investment. Our cold storage units are supplied complete with all the systems fully tested and ready for use, or as knocked down self assembly versions for installation within a building where there are access issues with installing a complete unit.
The base of the modular cold storage building is made from structural steel, and has integrated fork lift channels that allow it to be picked up and relocated with ease. The floor and walls are fully insulated to improve the efficiency of the cooling systems, and the walls are finished with a powder coating to ensure a long life for the unit once it is in use. Thanks to the integrated cooling systems, once the room has been put in place either inside your facility or in a suitable outdoor location, it simply needs to be hooked up to a suitable power supply, and switched on. The temperature control system allows you to set the optimum working temperature of the modular cold storage building, and then leave it running. Fully insulated walls, floor and ceiling keep the operating costs as low as possible, while producing the best possible environment for storing items at the correct temperature.
As you continue to read through our selection of Modular Cold Storage Buildings keep in mind we stand ready to answer any questions you may have about our offerings. Call us at 1-888-776-3720 whenever such questions arise and let us help you make the best investment within your budget.
Easy Rack carries a wide variety of commercial shelving, material handling equipment, commercial lighting, used pallet racks, and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas, Tennessee, Baltimore, Maryland, Irving, Texas, Amarillo, TX, Brownsville, Texas, Grand Prairie, TX, Pasadena, Texas, Fort Worth, Texas., El Paso, Texas., Charlotte, N.C, Milwaukee, Wisconsin, Seattle, Washington, Boston, Massachusetts, Denver, Colorado, Louisville-Jefferson County, Kentucky.
Whether you are expanding to a new site and want to be able to get staff in and working instantly, or need to add additional accommodation to an existing location, temporary exterior buildings from Easy Rack provide you with the perfect solution, and can be tailored to meet your exact needs.Thanks to our expertise in providing a wide range of modular and prefabricated buildings, we are able to offer a personalized service to provide your business with the space it needs to carry on.
Exterior buildings come complete with all the power sources, windows and interior walls that you need, and can be up and running within a matter of days, rather than the weeks or months that conventional buildings require.
While the exact specification of the exterior buildings that you choose will be tailor made to the requirements that you set out, the overall quality of construction from Easy Rack will be done to the highest possible standard, and include many impressive refinements to ensure that the building weathers well, and can provide your staff with high quality levels of accommodation wherever they need them.
Standard construction of a exterior building can be carried out on a single day, because the majority of the actual building work is carried out at the factory.Once the building’s components are complete, they are shipped to whatever location you require, and the final construction process can be carried out by our team of professionals within a matter of hours.
Depending on the local weather, your exterior building will include a number of special refinements to ensure maximum levels of performance and comfort.The walls are produced from two layers of sheet steel for strength.This steel sandwiches a layer of expanded polystyrene that provides excellent levels of insulation when in use.A layer of stucco is added to the outer skin of the wall, while the interior of the building can be decorated to your exact preferences to keep it in line with the rest of your facilities.
The interior layout of the building can be specified at the time of ordering, and a wide range of different options are available, from a single large space through to a number of smaller offices depending on your needs.
The structures are designed to be fully weather proof in use, and thanks to the quality of the materials used throughout the construction of these exterior buildings, they will last you very well.Unlike many competing products, which lack many of the creature comforts that make working offsite difficult, these buildings include everything that staff need and even have a pitched roof to avoid any problems with leaking in rain.
This type of building is particularly suited to any company that must work on a variety of different sites, and has the advantage of being completely portable.Once work in a location is completed, the structure can be dismantled quickly by a team of workers, and then rebuilt in a day at the next location where it is required.
Easy Rack carries a wide variety of commercial shelving, material handling equipment, commercial lighting, used pallet racks, and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with warehouses located throughout the United States that enable us to service all 50 states including Memphis, Tennessee, Baltimore, Maryland, Irving, Texas, Amarillo, TX, Brownsville, Texas, Grand Prairie, TX, Pasadena, Texas, Fort Worth, Texas., El Paso, Texas., Charlotte, N.C, Milwaukee, Wisconsin, Seattle, Washington, Boston, Massachusetts, Denver, Colorado, Louisville-Jefferson County, Kentucky.
Prefab Modular Office Building Sales & Installation Services Nationwide.
Thanks to the ever changing nature of business, and the fact that maintaining a competitive edge is dependent on the ability to adapt, many businesses find that they have constantly changing requirements when it comes to the internal office space in their buildings.Even a small reorganization have major implications on the actual space requirements within a regular buildings, and with this in mind, having a flexible system in place is essential if your business is to be able to react to the market and change on demand.With modular office buildings, it is simple to repurpose areas very quickly, and the layout of your office can be altered in a matter of hours simply by removing and replacing the internal partition walls wherever necessary.
One of the key advantages of a modular office building is that it is ready to grow with you, and thanks to the latest construction methods and the quality of the components that are supplied by Easy Rack, you will be able to get started on a project and complete it very fast.
When you are making changes to your business in order to boost efficiency or productivity, the most important thing is to get the changes implemented as quickly as possible.Minimizing the amount of down time that staff have during any construction work is essential, and thanks to the modular office building systems Easy Rack offer, you will be able to fully plan the entire change without moving a single desk, then order the components that you need, before moving walls and other objects as required to get the office laid out exactly as you want it to be.
Unlike traditional temporary buildings, modern modular offices include a number of factors to improve the comfort for staff.Thermal control panels and extensive noise proofing ensure that no matter where the office space is located, staff will not be bothered by external noise such as that which would be found in an industrial environment.
Thanks to the faster construction time provided by modular office buildings, your staff could be back to work within the same day as the building work begins, and the changes that you make are not subject to the same number of inspections and regulations as conventional construction, so there is less bureaucracy to deal with when you make changes to your own office space if it uses a modular building system for the internal layout.
The ability to change the interior of your offices in order to perfectly reflect the exact requirements of your business at any given time will enable you to react much more quickly to any changes in your industry, and push for growth and expansion in all areas of your industry at a speed that suits you.Thanks to the Easy Rack modular office systems, you will be able to transform your office on demand without having to sacrifice either a high quality finish, or rely on workmen taking weeks and weeks to make even a small change to the interior of your building.
Easy Rack carries a wide variety of commercial shelving, material handling equipment, commercial lighting, used pallet racks, and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with warehouses located throughout the United States that enable us to service all 50 states including New YorkNY, Los AngelesCA, Miami, FL. Chicago, IL. Denver CO., El Paso, Texas, Dallas TX, San Antonio, TX, Austin, TX.
Commercial & Industrial Netting 100% Made In The USA!
Most netting is made from nylon, polyester, or high tenacity polypropylene, a plastic polymer with amazing strength and resilience.Netting is used in almost every environment or industry for some functional or safety-related task.Amusement parks, theme parks, and water parks rely heavily on netting for child safety and crowd control.Many types of industrial facilities and service centers use to form protective barriers around maintenance bays in auto, truck, bus, and rail service centers.In the construction world, the use of safety nets, debris containment nets, and lifting nets are critical to operations.In material handling environments, netting plays a critical role in both fall prevention and in the creation of protective barriers around secure areas and dangerous equipment.Almost every form of sport uses netting as well.
The categories into which nets are classified are too numerous to address in a single article, although the most requested and sought after types and applications represent a form of classification that makes procurement more efficient and targeted.Easy Rack maintains a comprehensive inventory of nets for use in these areas
Cargo lift nets are used to load and unload cargo using a lifting method that draws the corners of a net around its load to a gathered point located above the load providing secure and balanced lifting.
Safety nets are used for fall protection, personnel safety, and debris containment.They are used extensively in material handling environments around mezzanine systems, conveyor belts, and racks.Construction environments rely upon them more for both safety and debris control and for lifting certain materials.
Nylon Netting
Nylon is an excellent material for safety and sports netting.Nylon has 3X the abrasion resistance of polypropylene and does not rot.It is ideal for use in sporting and recreational environments that are exposed to a combination of heat and high humidity.
Mesh netting
Mesh offers two major benefits to material handling and safety environments.Mesh has very fine holes that allow light to penetrate its surface but does not allow for clear visibility to the other side.Mesh can be used as a substitute for a wall when sensitive areas need to be blocked off from the view of unauthorized personnel.Equally, if not more importantly, mesh is highly tenacious and optimal for debris containment and lifting.
Protective and Protection Netting
Workers are often standing or walking around on elevated platforms.This is common in large warehouses with mezzanine systems and on almost every type of construction site.A fall from even a relatively short distance can result in permanent injury or death.Protective netting installed around these platforms forms a wall-like barrier to prevent this from happening.
Barrier Netting
Events and outdoor public facilities can become so crowded that it is necessary to restrict access to certain areas and to direct traffic along certain pathways.Polyester or polypropylene barriers can be obtained in a variety of low profile and even decorative designs that limit mobility without overpowering the scenery.
Golf Netting Golf Barrier Netting
Perhaps one of the best inventions ever devised from driving range enthusiasts.These barriers catch golf balls and eliminate the long walks and golf ball retrievals so players can have more time to focus on their golfing skills.
Easy Rack carries a wide variety of used pallet racks, commercial shelving, material handling equipment, commercial lighting, and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you.
Easy Rack is your complete new & used pallet racking
systems dealer - distributor & installation that will meet all your storage
requirements. We specialize In the popular teardrop designed pallet racks that
offers 2" adjustability for most efficient height usage. Our use pallet racks
are available in many sizes and capacities up to 31' high and 64' wide which
are treated with Iron Phosphate and painted with a baked on enamel
Used Pallet
Racks. Pallet Racking solve the bulk storage and
retrieval needs faced by most industries
today. Pallet rack systems provide a cost effective means to
manage inventory safely and efficiently. Adaptability to specific
layout space is just one added feature. This computer assisted pallet
rack design allows for optimum storage efficiency and maximum cost
effectiveness. Uniformly stamped beam ends with drop in place locking pin
provides quick assembly with maximum user safety. Two different beam
styles to choose from.
Teardrop Used Pallet
Racks. Teardrop pallet racks are the most used type of pallet rack on the market
today. It has an ingenious design that allow you to slide the beams into place
without clips or fasteners (Boltless Pallet Racks). We offer many different
verities of teardrop pallet rack which allows many arrangement options for
warehouses, garages, industrial plants, schools, libraries, storage units,
factories and other commercial applications.
Structural Steel Used Pallet
Racks Our new structural steel line
of Pallet Racking is resistant to fork lift damage and has weight bearing
capacity to 48,000 lbs at 84"beam spacing as opposed to 35,000 lbs. at 54" beam
spacing for a standard pallet rack.
Used Pallet
Racks. Easy Rack offers a wide selection of
used pallet racks at vary affordable prices. We offer many different styles and sizes to choose from.
and acres of racks in stock. We know that organizing your warehouse and finding
a suitable place to store materials can be a daunting task. Easy Rack has the
solution to maximizing your available space to elevate your product or
merchandize off the floor.
Cantilever Racks Cantilever racks are used for storage
of long or odd shaped materials. Cantilever racks use a 12? or 16? tower in rows
of 3 with several sets of steel arms attached to the tower for horizontal
storage of long materials such as pipe Easy Rack has a large selection of new
and used cantilever pipe racks at discount prices.
Warehouse Pallet
Racks Warehouse Pallet Racks are mostly used for bulk storage in warehouses and
industrial factories . Easy Rack stocks many pallet rack sizes and specialize in
used uprights, crossbeams, and wire decking pallet racks. We offer material
handling and pallet rack installation nationwide Including moving
complete pallet rack systems to new destinations. Free material handling
equipment and pallet rack installation consultation and computer CAD
drawings & layouts.
Pallet Racking Sizes. *Note: Used 4, 5 & 6 Panel Frames Are Not Always Available.
Many new and used pallet
rack sizes and capacities available.
Pallet Rack sizes to 31"
high, 64" wide.
We handle roll formed
and structure pallet racking .
Selective, Drive In and
Drive Thru pallet racks.
Pallet Racking
solves your storage and retrieval needs.
Provide a cost effective
means to manage inventory
Offers optimum storage
efficiency
Provides maximum cost
effectiveness
Fast assembly with maximum
user safety
Computer Assisted Design.
All of the new pallet racks
we offer comes with the manufactures warrantee and can be shipped anywhere in
the country on short notice. Easy Rack deals in such high volumes of new &
used pallet racks we are positive to have the storage solution you are looking
for at reasonable prices.
Easy Rack Warrants goods
purchased here to be free of defects in materials and workmanship (finish
excluded] for a period or one [1] year from date of shipment. This warranty
shall not apply in event goods are damaged as a result of misuse, abuse,
neglect, accident, improper application, modification or repair by persons not
authorized by seller or damaged during shipment.
All implied warranties,
including but not limited to warranties or merchantability and fitness for a
particular purpose are hereby excluded.
Buyers remedy, if any, for
any defective goods shall be limited to a refund by seller or replacement of
goods at sellers option, and shall in no event include damages of any kind,
whether incidental, consequential or otherwise.
No products accepted for
return without prior approval. Seller shall have the right to inspect goods
claimed to be defective at buyers place of business or require buyer to return
the goods to seller for inspection on seller?s premises. Transportation charges
borne by seller only if goods are proven defective under warranty.
*Note New
and used pallet racks are design to hold pallets also called skids that are used
to transport and store stacks of products, materials or merchandise. Pallets or
skids are moved with gasoline powered pallet
trucks and
electric or hand pallet jacks. Skids can typically hold up to 2000
lbs. of materials, and measure 40" X 48".
Easy Rack
offers a complete inventory of material handling
equipment and
used pallet racking with installation nationwide. Our wide selection
of both new and used pallet racking offers a safe and economical way for
employees to efficiently do their jobs on a day-to-day basis. The tangible
benefits companies can count on receiving in return for their investment is
improved time to market, reduced risk of injury and subsequent insurance costs,
and reduced and possibly eliminated overtime, all of which drive overhead down
and profits up.
Easy Rack carries a wide variety of
commercial shelving, material handling
equipment, commercial lighting, used pallet
racks, commercial christmas
lighting and modular
prefab buildings installed nationwide. If you can
not find what you are looking for call us toll free at 1-888-776-3720 and
we will find it for you. Our home office is located in Houston,
Texas with warehouses located throughout the United States that
enable us to service all 50 states including New YorkNY, Los Angeles
LACA,
Miami, FL. Chicago, IL. Denver CO., El Paso, Texas, Dallas TX,
San Antonio, TX, Austin, TX, Boise ID, Atlanta GA, Albuquerque NM,
Raleigh-Durham NC, Washington DC, Albuquerque NM, Huntsville AL, Fayetteville
AR, Norfolk VA , Madison WI., Corpus Christi, TX, Plano, Texas,
Garland, TX, Laredo, Texas, Lubbock, TX.
A key area of concern for almost any business is the quality of the packaging that they use for the goods that they produce. Without high quality wrapping, items can easily be damaged in transit, making a high quality control of all other production areas a waste of time. The costs to a business of items being delivered to a client in unusable condition are very high, so ensuring that high quality packaging equipment and materials are used at all times is an investment that should never be overlooked.
Once the actual physical production of an item is complete, it may either be put into storage until required, or dispatched immediately to the consumer. In either case, there is a very strong argument for using packaging equipment and wrapping to protect the item. If articles are not wrapped properly in storage, liquids and dust can get into delicate areas and leave the items unusable. During the actual process of distribution, if goods are not securely wrapped and held in place on a pallet, they can slip around in the back of the truck and be damaged as a result.
Easy Rack offers a full range of packaging equipment that are able to handle the full process of packing items securely and to a high standard. From single items through to full pallets and large crates, with our comprehensive selections of tools and materials, you can be assured of getting the highest standard possible at all times.
An important consideration for the packaging process is tensioning of any wrapping. When goods are shrink wrapped onto a pallet for transportation and storage, secure wrapping makes certain that they will not be dislodged in transit, and allows for goods to be stacked properly by providing more support when needed.
A stretch wrap machine can take a whole laden pallet, and will rotate at high speed while dispensing shrink wrap at the correct tension. An integrated heating system ensures proper fitting of the wrap and improves the stability of the load. This combination of roles in a single tool saves time when wrapping a large number of items and will create a much more efficient process for getting goods ready for dispatch.
When strapping is properly applied to boxes and bundles, it prevents them from coming apart and ensures that all items that are meant to be kept together are held in place. Whether plastic or metal strapping is used, getting it tightly into place, and properly fixed is essential. One of the most useful pieces of packaging equipment is a strapping bench. By using these carefully designed tools to apply the strapping, you can ensure that it is properly tensioned and sealed every single time.
Other things to consider include weighing scales to ensure that trucks are not overloaded, and that the manifests are correct, while hand held stretch wrappers make a cost effective alternative to an automated wrapper for businesses with a smaller throughput that makes large scale automated packaging equipment uneconomical.
As you continue to read through our selection of Packaging Equipment, keep in mind we stand ready to answer any questions you may have about our offerings. Call us at 1-888-776-3720 whenever such questions arise and let us help you make the best investment within your budget. We are located in Houston, Texas.
Easy Rack carries a wide variety of commercial shelving, material handling equipment, commercial lighting, used pallet racks, and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with regional distribution centers located in all 50 States including New YorkNY, Los AngelesCA, Miami, FL. Chicago, IL. Denver CO., Dallas TX, San Antonio, TX, Austin, TX, Boise ID, Atlanta GA, Albuquerque NM, Raleigh-Durham NC, Washington DC, Albuquerque NM, Huntsville AL, Fayetteville AR, Norfolk VA , Madison WI.
Pallet handling can be very dangerous if attempted with inadequate or outdated tools.
New Pallet Handling Equipment has made it possible to ergonomically and safely handle pallet loads faster and more efficiently than ever before.Based on simple, yet highly effective engineering, these sturdy and reliable pallet loaders keep pallets at ideal heights for loads to be built or broken down at will.
This unit minimizes the risk of back injury by eliminating the need to bend down and stretch to manually manipulate pallets.It also uses a turntable that facilitates nearside loading.Constant working height is maintained by springs and shock absorbers that raise and lower the unit.The spring handles all the work without the need for electricity or shop air.Capacity is 4,500 lbs.
This pallet handling tool is ideal for varied pallet loads that randomly change.The unit is operated by a combination airbag and spring.If the airbag accidentally loses air, the spring provides some backup safety to prevent total collapse.Fork pockets make it easy to relocate the unit and provide a stable base that needs no lagging.
This unit is ideal for applications where pallets size and weight varies widely.The operator has total control of the unit because of a foot control that adjusts the load to any desired position.The manual turntable, which rotates easily, makes it possible for the operator to always work on the near side of the unit.Load capacityoptions are 2,000 lbs and 4,000 lbs.
This unit can perform multiple pallet handling functions.Workers can use it to position pallets or to feed pallets into other pallet loaders.It can also be used as a vehicle, which is much safer and practical than moving pallets on a forklift.
The roll-on unit lowers to floor height so that pallets can be rolled on and off of it with a hand pallet truck.The operator can then use a pushbutton or foot switch to easily adjust the lift.Narrow side and back panels make it easy to reach from any position.
The full turntable adds even more operator convenience. It lowers to floor height via lift or push button.Pallets can then be rolled on and off with a hand pallet truck. The narrow side and back panels allow for easy reach over for 4 side access.
Made for pallet handling loads up to 48" x 48" x 60" high the Rotator and Inverter is engineered to invert entire palletized loads.A pressure adjustable clamping mechanism can secure loads up to 4,400 lbs and rotate them 180 degrees.
Pallet trucks are material handling tools used to lift and maneuver pallets.The basic design of these devices is simple enough.It consists of a frame that supports two extended forks.The back of the unit rests on two rear wheels, and each fork also rests on a wheel located toward the front interior of the fork.A built-in hydraulic jack of some sort is attached to the forks and elevated, it separates the forks from the front wheels and lifts the pallet off the floor just enough to make it safely mobile.A locking mechanism of some sort exists on all models to ensure that the pallet is held firmly in place during transport.
There are two basic types of pallet trucks: manual and powered.Within each of these classification types exists a myriad of models engineered specifically for different operations, different load sizes, and different environments.Neither the manual category nor the powered unit category offers an absolute advantage over the other in every type of application.Instead, the relative applicability of a manual operability versus powered assistance depends greatly on the environment in which it is used, the application at hand, and in some cases, even the subjective preference of the operator.
Despite the many engineering and operational variances in this line of products, however, there are certain very key attributes common to all Easy Rack pallet trucks.Safe operation is the most important of these.Because these devices were originally intended to replace the manual lifting and carrying of heavy loads, it is absolutely imperative that the hydraulic jack on every model and unit we sell perform reliably and consistently.Pallets must be lifted to the desired height and locked securely in position to ensure that the forks will not collapse to the floor if the wheels pass through debris, roll over an uneven surface, or find themselves used on uneven terrain.
It is also essential that every pallet truck be easy to maneuver in all directions.Most importantly, it should move forward in a straight line without veering uncontrollably to the left or the right.This requires all models to be built with wheels that will turn freely without accumulating debris and locking up.Some wheels may also need special traction due to environmental or application demands.All units, regardless of operability or model type, must be easy to steer without strain to operator hands, arms, or shoulders
To accommodate this need, many newer models now feature special ergonomic startup mechanisms such as the power drive accumulator.This allows the worker to start moving the unit forward simply by tilting back the handle.Other models are constructed from galvanized zinc for heavily polluted or salt-air environments.Still others feature scales that allow workers to weigh contents on pallets.Gasoline power helps larger models to lift and move heavy loads of up to 4,000 pounds.All terrain pallet trucks often feature a tubular design frames to accommodate outdoor mobility in rugged environments.
When selecting a particular model a particular facility or operation, cost should never be the first factor considered.The price of using the wrong tool for the right job can be far more expensive than the initial investment to obtain the best tool for the job, improve material handling efficiency, and better ensure employee safety.
To make the best decision, talk to an Easy Rack material handling expert about the many models and customization options that will ensure the highest return on investment in terms of improved process flow and more rapid time-to-market.
Easy Rack carries a wide variety of pallet trucks including gas and electric pallet truck and pallet jacks with scales. Our line of pallet trucks offer a safe and economical way for employees to efficiently move heavy pallet skids without the use of a fork lift. Listed below are the many different pallet truck types that we offer.
Powerful gas powered pallet truck with traction drive system makes it easy to move bulky material over rugged, uneven terrain. Pallet truck will handle loads of 2000 lbs. or 4000 lbs. capacity @ 18" load center, pallet truck also includes power fork lift and lower, durable steel construction means years of dependable use with blue painted finish.
Pallet Stackers & Skid Lifts Large containers are often crated in such a fashion that standard pallet jacks cannot lift them.Large containers of unique dimensions likewise are difficult to manipulate with even the sturdiest of pallet jacks.
Heavy duty all terrain pallet truck is lightweight yet its strong tubular frame design handles evenly distributed loads up to 2,000 lbs.
Pallet Truck with Scale. A pallet jack with built in scales allows you to weigh your material on location to maximize employee efficiency. Pallet truck frame has a heavy duty steel construction for strength and durability.
Low Profile Hand Pallet Jack ? Pallet Truck. Our low profile pallet truck allows employees to access pallets from all four sides. Pallet truck is made with a reinforced steel frame that will handle a 4,000 lb load.
Big Wheel Pallet Truck - Pallet Jacks. Big front wheel heavy duty pallet truck is a new piece of material handling equipment that facilitates moving products or bulky material over uneven floors. Load capacity is 4,500 lbs.
Sidewinder Pallet Truck Transport long bulky loads down narrow aisles with this heavy-duty pallet truck. This versatile and durable pallet truck retains all the quality workmanship of a standard hand pallet truck in addition to providing lateral movement.
Chrome, Galvanized, Zinc and Plated Pallet Jacks. Engineered for corrosive material handling or wet environments these full featured pallet jacks were designed for laboratories, chemical, pharmaceutical and wash down. Features include skid adaptors, low temp hydraulic oil, adjustable push rods and 180? turning radius.
Hand Trucks When you are planning any business or industrial process, one of the main considerations to bear in mind is the way in which materials are to be moved around. Inevitably, there are a number of calculations that must be made in this process, but the normal method of ensuring the best internal distribution is to use people.
Power Assisted Ergonomic Pallet Jacks - Pallet Trucks. Anyone who has operated a fully loaded pallet truck knows the most strenuous part is starting the wheels rolling. This Pallet Truck solves this back breaking problem. Pumping the handle of the pallet truck serves two purposes. First, it serves the traditional purpose of lifting the forks. Second, switch to the power drive accumulator and by pulling the handle back, the pallet truck begins to roll automatically, thus reducing the pulling force.
Nose Wheel Pallet Truck - Pallet Jack. This type of pallet jack is designed to position pallets or skids closely in a row. The fork end is set back from the front rollers allowing for one pallet pick up at a time. The unit has a rubber grip handle with a three lever position for easy operation and maneuvering. This heavy duty unit is rated at 5,000 pounds capacity and has a service range from 3-1/2" to 8". Unit includes two articulating steering wheels and two front load rollers. Spring loaded loop handle automatically returns to vertical position when not in use. Extra long 45" forks are used with standard 48" long pallets. Short 38" forks are used for maneuvering in tight spaces.
Economical Hand Pallet Truck - Pallet Jack. Our quality built hand pallet truck is economical and safe way for employees to move loaded pallet skids without a fork lift.
Freight Pallet Jack with Analog Scale. Easy Rack offers a unique pallet truck that combines a pallet jack and commercial scales into one unit that economically, safely and efficiently weighs your pallets or skids.
Electric Pallet Truck. Our electric powered mobile pallet truck is design to be easy to use, safe and helps warehouse personnel be more efficient.
Pallet Truck Caddy. Convert your mobile pallet truck that will economically standard pallet truck into a portable workstation in minutes. Our pallet truck caddy is designed with user efficiency and handiness in mind.
Our pallet truck skid adaptor increases raised height by three inches and adapts to most pallet trucks.
Fork Lift Battery Mover Adaptor. Our battery transfer fork lift adaptor is designed to load, unload and transfer fork lift batteries safely and efficiently.
*Pallet truck not included.
Stand Alone Battery Transfer Cart. Battery transfer cart is a stand-alone material handling unit that does not require a fork lift. Designed to easily move, load, unload or transfer fork lift truck batteries.
Easy Rack carries a wide variety of commercial shelving, material handling equipment, commercial lighting, used pallet racks, and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with regional distribution centers located in all 50 States including New YorkNY, Los AngelesCA, Miami, FL. Chicago, IL. Denver CO., Dallas TX, San Antonio, TX, Austin, TX, Boise ID, Atlanta GA, Albuquerque NM, Raleigh-Durham NC, Washington DC, Albuquerque NM, Huntsville AL, Fayetteville AR, Norfolk VA , Madison WI, Jersey City, NJ Newark, New Jersey.
Modular Prefabricated Building Construction Sales & Installation Nationwide.
Unlike traditional building methods, which are hugely intrusive, and labor intensive, modular building construction has a lot of advantages that can save you a great deal of time and money over the period of the building, and minimize the impact that construction work has on your business.
The most important aspect of modular building construction is that the vast majority of the work is carried out off site.The various components of the building are assembled in the factory, where all the power systems, lighting, and other important areas can be built into the system as it is put together.This means, that once the kit that produces the building are delivered to site, they can be fitted together quickly by the fully trained staff.The fact that the majority of the work has been carried out before the building is even delivered means that once the modular building arrives at your install location, the actual assembly can be carried out in a fraction of the time that it would take to build conventionally.
Another advantage of modular building construction is that if your needs change over the lifetime of the building, changes can be made very simply.In order to add more space, you can add additional rooms or even a second story to the fully flexible construction model, while internal space can be changed with ease so that any combination of room divisions is possible within the normal shape of the building, and thanks to the latest designs, removing and replacing walls does not affect the surrounding panels, and can be carried out very quickly by the installers.
Thanks to the latest techniques of modular building construction from Easy Rack, you will be able to enjoy world class office space that is flexible enough to grow with your business, and cost effective enough to make it a good investment that will assist with the way you work.In the past, one of the main criticisms that was leveled at modular buildings was that the interiors were inferior to more traditional systems, providing a lower quality of accommodation than the alternatives.
With the new techniques and materials that are now used in modular building construction, you can rely on getting high quality office and meeting space within your existing buildings without any concerns about the interior, which will be fitted out to a professional standard thanks to painted surfaces, and well made panels that reflect the quality of construction.
Of course, the biggest advantage of choosing modular buildings as additional space is that the construction process is entirely clean and will not interfere with other ongoing projects. Our installation team will simply be able to build the new space up from the supplied components, and as all the walls are supplied complete with no cutting needed, the only waste that the whole process will create is the packaging, which can be disposed of very easily.As soon as the buildings are finished, they are ready to use, and you can take advantage of them immediately rather than waiting for long periods of time.
Easy Rack carries a wide variety of commercial shelving, material handling equipment, commercial lighting, used pallet racks, and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with warehouses located throughout the United States that enable us to service all 50 states including Washington DC, Nashville-Davidson, Tennessee, Las Vegas, Nevada. Portland, Oregon, Oklahoma City, Oklahoma, Tucson, Arizona, Long Beach, California, Atlanta, Georgia, Fresno, California, Sacramento, CA, Corpus Christi, TX, Plano, Texas, Garland, TX, Laredo, Texas, Lubbock, TX.
As more and more businesses turn to high tech methods of production, it has become increasingly important to be able to isolate certain parts of the production process using environmental enclosures.These units provide a self contained area within an industrial facility or other building where sensitive processes can be carried out safely.Whether your business specializes in producing high tolerance electrical components that must be assembled in a clean environment without dust or dirt, or you need to create an area where toxic chemicals can be used without the risk of escape into the wild, an environmental enclosure or clean room is an essential part of your building.
In its simplest form, an environmental enclosure is simply a room within a building where the operators have a great deal of control over all factors that affect the interior.From specifying an optimum temperature through to setting ideal humidity and dust levels for a process to be carried out, an environmental clean room offers your business the best option for keeping sensitive systems running at maximum efficiency.
Installing an environmental enclosure within your building is a straightforward process, although it is generally more costly than implementing a similar sized office block, even when modular components are used.There is generally a fair amount of infrastructure needed to support the operation of the environmental enclosure in the form of air conditioning ducts, de humidifiers, and powered air filters to prevent things from getting in or out.
Certain business types require a much more controllable environmental enclosure in which work can be carried out.A room that offers the ability to prevent any escape of chemicals is required when working with certain pharmaceutical techniques, while minimizing the entry of dust into components is a key way of improving the way in which delicate and sensitive electronic components are produced.
When a modular technique is used for the installation of a clean room on your premises, you get a number of benefits.Firstly, all of the systems such as air, electricity and water are built into the actual room, trunking is included within the walls, and they are designed to fit together with a good seal to prevent any escapes.
Thanks to the modular nature of the construction of these environmental enclosures, it is entirely possible to adapt and change the clean room over time as your needs change.Walls can simply be shifted around and rebuilt to the new specifications in a matter of days, allowing your environmental room to always incorporate the needs of your business within its sealed walls.
Choosing the right environmental enclosure for the needs of your business relies on you being completely certain about what you need.Thankfully, when it is the time to order the room, an expert will be on hand to run through all of the available options and how they will impact on the running and operation of the enclosure.This will ensure that the system is ideal for your needs.
Easy Rack carries a wide variety of commercial shelving, material handling equipment, commercial lighting, used pallet racks, and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with warehouses located throughout the United States that enable us to service all 50 states including New Orleans, La., Cleveland, Ohio, Kansas City, Mo., Mesa, Arizona, Virginia Beach, Va., Omaha, Nebraska, Oakland, California, Miami, Florida, Tulsa, Oklahoma, Minneapolis, Minnesota, Colorado Springs, Colorado, Arlington, Texas, Beaumont, Texas, Denton, TX, McKinney, Texas, Midland, TX, Killeen, Texas.
Maintaining a high morale level amongst staff can have a major impact on their productivity, and one of the best ways of making employees feel valued in their work is to provide them with space in which to relax and unwind during their breaks.While it may seem counter intuitive to invest a large sum of money in a non work facility, a break room can make a big difference to how happy staff are at work, and improve retention.With a modular lunchroom, you will be able to provide space within your existing building where staff will be able to gather for meals and breaks without having to invest in a special construction project.
A modular lunchroom is a fairly simple addition to any business premises, and Easy Rack can help you with a number of different designs to suit all sizes of business, and all levels of investment.Choosing the right system for your business, and fitting it out with appropriate furniture will provide you with an added dimension to your premises, and allow for staff to stay on site throughout the day.
The most important thing to think about when planning a break room is the size of facility that you need.While most companies stagger lunch breaks for staff so that many employees remain at work at any one time, it is advisable to provide space for all staff so that large meetings and other get togethers can be held in one place.
It is also important to decide exactly what kind of facilities that you want to offer within your break room.Are you simply going to provide a shelter where staff can go in between shifts, or do you want to include full recreational facilities including power supplies and sofas.A larger modular lunch room can be separated into different sections for various purposes, and provide a much larger range of activities than a simple shelter, but the installation cost will be much higher than a less complex system.
The biggest advantage that you get from choosing a modular system for your break room is that it can be changed and repurposed over time to ensure that it always meets the needs you have set out for it.
If you start off with the installation of a straightforward place where staff can sit and eat their lunch, and your needs change, with a modular lunchroom, you will simply be able to change certain areas of the construction to meet your new needs.Additional space can be added by installing a few extra panels in the walls, and the interior of the room can be changed entirely by moving the walls to create almost any layout that you can imagine. Aside from the fact that the new modular lunch room can be installed in as little as a day, compared to several weeks for a traditionally constructed breakroom, there is also a tax benefit from choosing a modular building.The temporary nature of the structure means that you can recoup the costs of depreciation over just 7 years rather than 39 for conventional buildings, which can save you a great deal of money in the short term.
Easy Rack carries a wide variety of commercial shelving, material handling equipment, commercial lighting, used pallet racks, and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with warehouses located throughout the United States that enable us to service all 50 states including New YorkNY, Los AngelesCA, Miami, FL. Chicago, IL. Denver CO., El Paso, Texas, Dallas
Wherever you need to provide outdoor cover for people, the simplest and most cost effective solution available is a modular shelter.With a huge range of different options available to ensure that no matter what your requirements are in terms of size or shape, there is a shelter that can be provided quickly and effectively in modular form.
One of the main advantages for you in choosing modular shelters for your outdoor protection needs is the speed with which the structure can be provided.Thanks to the methods of construction that are used, almost any size and shape of shelter can be created, and then installed wherever it is needed very quickly in comparison with the standard methods of construction available.
One of the most popular designs of modular shelter is the standard bus stop shelter.These ubiquitous structures are familiar to us all, and are increasingly important as we turn to public transport in order to improve our environment.Thanks to the advanced techniques and components that are used in the construction of these modular shelters, it is possible to use the same basic parts as the building blocks for a wide variety of different structures.Sharing components across different platforms means that the actual process of building can be made much simpler without compromising on the quality of the work.It also means that the overall costs of construction are much lower as common parts can be used without meaning that the finished result is confined to a particular form.
One of the main advantages of using prefabricated modules in order to produce modular shelters is that the exact specifications of the unit can be set out in advance of construction, and all the components can be delivered to site ready for immediate use.
Once the shelter has been constructed and all the various parts installed into place, no further finishing is required, and users can take advantage of the shelter immediately.
Depending on the exact specifications that you set out, it is possible to create an almost infinite variety of configuration for your new modular shelters, from simple one walled structures through to much larger fully enclosed areas that will protect users completely from the outside elements, the number of options is practically endless.You can also specify a huge number of options to define exactly how you want the finished shelter to look, including color of glass, the type of paint that is used, as well as a variety of different colors so that you can ensure that your new shelter will fit in with the corporate identity that is displayed on all of your other units, rather than looking out of place.
Whether you are in charge of a mass transit system and want to provide a network of bus stops, or simply want to provide an outdoor smoking shelter for the use of staff during the day, modular shelters have a number of advantages over conventional buildings:They are quick to install, easy to maintain, and completely flexible.You simply specify the kind of design that you want for the units, and they can be delivered to the site in kit for ready for assembly.
Our portable shelters are found protecting employees and equipment at Fortune 500 companies, government and military installations, airports, manufacturing facilities, parking lots and anywhere else your imagination may take you.
Easy Rack carries a wide variety of commercial shelving, material handling equipment, commercial lighting, used pallet racks, and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with warehouses located throughout the United States that enable us to service all 50 states including New YorkNY, Los AngelesCA, Miami, FL. Chicago, IL. Denver CO., El Paso, Texas, Dallas TX, San Antonio, TX, Austin, TX, Boise ID, Atlanta GA
In a modern business environment, flexibility and the ability to adapt to changing market conditions are essential if your company is to grow and prosper in line with your ambitions.With this in mind, the conventional office model of specific areas given over to specific departments separated by wall dividers is no longer possible, and over the space of a couple of years, the pace of change can mean thatsome parts of the company grow, while others inevitably shrink to make the best use of resources.
With this in mind, it has become more and more important for businesses to be able to change the infrastructure of their office space in order to accommodate changes to the workforce.By using prefabricated modular office partitions throughout your office space, it is possible to transform the way your business functions.These removable dividers can be fixed into place in around half the time of a conventional wall, minimizing intrusion into work time during a reorganization of the business, and allowing staff to get on with their work.
A wide variety of different office partitions are available to choose from, offering you the ability to lay out your work place in exactly the way you want to.The partitions fix into place using the exterior walls, ceiling supports, and each other to create a pleasant working environment that is able to split open plan office space into discrete areas where staff working together can interact easily without disturbing other staff.
One of the great advantages of using office partitions rather than conventional walls is that it is eminently possible to add additional functionality to your space without major construction.Meeting rooms, training areas, and even executive offices can be installed quickly and easily by trained staff, and because the dividers are reusable, the layout of your office can be transformed over and over again using the same materials.
Because modern modular office partitions are prefabricated off site, there is little mess caused by the actual installation process, so the impact on staff is minimized.All the decoration also takes place off site, so you can rest assured that once your new wall dividers are installed in your office space, they will fit in visually with the rest of the working environment, and simply complement all the other walls, making it hard to spot the joins.The whole system of installing new office space with office partitions acting as the dividing walls means that you can house your business in a large open plan office, and then adapt it for your specific needs at a relatively low cost and with little impact on staff as changes are made/
From an operational point of view, having staff working on the same project or team located close together means that they are much more able to swap ideas and this ability to interact with each other has been shown to drive progress at a much faster pace than in an area where they are separated.By using office partitions around each department or team, you enable them to work together without the distractions caused by other colleagues nearby, and ensure that they are able to do their jobs properly and to the benefit of the whole business thanks to greater efficiency and communication.
Easy Rack carries a wide variety of commercial shelving, material handling equipment, commercial lighting, used pallet racks, and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with warehouses located throughout the United States that enable us to service all 50 states including Washington DC, Nashville-Davidson, Tennessee, Las Vegas, Nevada. Portland, Oregon, Oklahoma City, Oklahoma, Tucson, Arizona, Long Beach, California, Atlanta, Georgia, Fresno, California, Sacramento, CA, Corpus Christi, TX, Plano, Texas, Garland, TX, Laredo, Texas, Lubbock, TX.
Creating an environment that is easy to work in and uses the latest advances in ergonomic engineering will always result in a safer and more productive workforce. By making it easier to carry out a task, it is evident that the employee will be able to carry out the task more quickly. One way of boosting the ergonomic efficiency of a workplace is to make extensive use of a flexible working environment by using scissor lifts.
There are many different forms of scissor lifts that are used in a wide variety of different tasks. From pallet shifters through to platforms to allow staff access to higher shelves, and even adjustable work benches the list of applications for a piece of simple technology that boosts accessibility is practically endless.
One of the most widely used scissor lifts is the standard pallet jack tool. These miniature forklift devices are designed to be as efficient as possible in raising a single pallet off the ground in order to move it from one place to another without the need to resort to using a powered forklift. Pallet jacks use a pneumatic ram pumped by the user to lift the pallet, which is then supported by the scissor mechanism.
A more advanced version of the pallet jack is the pallet server. This is a more powerful version that is the intermediate between the jack and a full forklift. It can carry up to 4000lb of weight, and is secure in use thanks to the efficiency of its design.
Perhaps the most useful application of the scissor lift in the workplace is in tables and workbenches. By utilizing the design and creating a flexible working environment, a person can examine and handle a large and bulky object such as an engine or other major component at a comfortable level, constantly adjusting the height of the table in order to ensure the best possible accessibility. A work bench which makes the work easier to carry out will reduce the amount of time that the task will take to carry out and improve the workflow.
A related scissor lift application to an adjustable work bench is a work platform. Instead of moving the object relative to the worker, the lifting platform raises the worker. When you are in an environment where your staff are working with very large structures such as trucks and buses, being able to quickly access high up areas that would otherwise require a fixed platform supported by scaffolding will save a great deal of time using a portable powered lift.
All in all, the ergonomics of a workplace have an enormous impact on the efficiency of staff, and anything that can be done in order to boost the ease with which workers can carry out their tasks will be of enormous benefit to the business thanks to quicker turnaround times, and a higher standard of work carried out thanks to the best possible access and mobility from a flexible working environment enabled by scissor lifts.
Easy Rack carries a wide variety of commercial shelving, material handling equipment, commercial lighting, used pallet racks, and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with regional distribution centers located in all 50 States including New YorkNY, Los AngelesCA, Miami, FL. Chicago, IL. Denver CO., Dallas TX, San Antonio, TX, Austin, TX, Boise ID, Atlanta GA, Albuquerque NM, Raleigh-Durham NC, Washington DC, Albuquerque NM, Huntsville AL, Fayetteville AR, Norfolk VA , Madison WI.
Maintaining the security of your business premises and keeping them safe from potential thieves requires a range of protective measures to be taken.Fences around the perimeter of the property, alarm systems and close circuit television cameras can all be installed as a deterrent, but the best way of protecting your business from crime is to employ onsite security guards.Shacks are available to be sited around the premises to provide a place where the guards can coordinate their patrols, and rest in between checking the site.
Depending on the levels of security your business demands, there are a wide variety of different security guard shacks and booths available.You can choose from different thicknesses of the aluminum that is used for the actual construction from one and three quarter inch through to a full three inches if the demands of the booth require that.
As with all the different modular buildings that we offer, our security guards shacks are built to the highest standards of construction, and can be shipped to you either fully constructed for instant use, or knocked down in kit form to be constructed on site.
The actual facilities in the booths can be specified by you when you order, and a comprehensive range of equipment is available to ensure that the system you get fully meets your needs.
Whether you need a booth for a security guard to use when admitting people in to your premises through the main gates, or to act as a place for coordinating all of the operations, there is a custom solution available from Easy Rack.
From one man security shelters to stand at the entrance to your office through to large multi purpose modular security guard shacks that can be used for monitoring large areas via integrated TV systems, there is a shelter for every need available.
Thanks to the modular nature of the security shacks available, you will be able to customize every aspect of the design to your precise needs.From the size and layout of the booth through to the exterior and interior paint job, the whole thing can be tailored to fit in with the rest of your premises, and then shipped to your location ready to install and use.
The main requirements of a security guard shack are that the building is able to protect the occupant, and allow them a great deal of access to the surrounding area.The booth needs to have windows on all sides if possible, feature a means of communication with the rest of the premises, and be located in an area with good visibility.A well placed security booth can act as a deterrent to would be criminals, and thanks to the fact that a guard is able to make complex decisions and take action as well as just observing the site; he offers a much better level of protection than cameras and an alarm system alone.
Whatever the needs of your business, security needs to be considered a major priority, and providing proper protection and shelter to guards will assist them greatly in getting their sometimes difficult job done properly.
Easy Rack carries a wide variety of commercial shelving, material handling equipment, commercial lighting, used pallet racks, and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with warehouses located throughout the United States that enable us to service all 50 states including New YorkNY, Los AngelesCA, Miami, FL. Chicago, IL. Denver CO., El Paso, Texas, Dallas TX, San Antonio, TX, Austin, TX, Boise ID, Atlanta GA.
Shade canopies provide important protection from the sun�s damaging rays.Easy Rack has shade protection products in a wide range of UV shade factors that are designed for specific environments and applications.Some are intended for commercial environments, while others are made just for residential yards.We also carry sun protection screens for playgrounds so children can enjoy being outside without suffering from the deleterious effects of sunburn.
UV factors include 45 percent, 63 percent, and 80 percent.Easy Rack shade cloth can be used in many different types of sun control structures.The shade canopy is stretched tight over a support structure and provides shelter for humans, animals, and in some cases, even plant life underneath.Common applications include awning, tension structures, and garden structures.
Easy Rack shade canopies can also be used in playground environments.This protects children from both UV radiation and temperatures which can cause heat exhaustion and heat stroke.We also have fabrics that can be used to shelter people on school campuses and outdoor areas near hospitals.The UV factor you select really should be chosen on the basis of what you are looking to protect people from.If the primary concern is heat, then a lower UV factor is acceptable.If the biggest concern is sunburn, then a higher UV factor will be necessary.
Easy Rack shade protection devices are more than just fabrics that you stretch across an overhead structure.The fabrics that are used to make these various protection devices are so durable that they can be used to create permanent shade structures.Many fabrics, for example, are fire resistant.Others are waterproof and will withstand the heavy rains that strike Texas and other GulfCoast states periodically throughout the year.Still others can withstand wind speeds of up to 80 mph.So long as you have a structure that can take a beating for the elements, you can count on the sun protection canopies themselves to endure the elements and continue to perform when the sun�and heat�return.
In addition to sun shades for schools and hospitals, we also have a number of models that are ideally suited for commercial office parks.Many companies like to build a shaded area between the buildings for employees to use as a comfortable break area.
Athletic facilities use shade canopies too.Some sports can actually be played under the larger canopies so players do not get so hot in the sun, or suffer from sunburn during competition.Other models are made to stretch over seating areas so fans can watch the game from the shade.This not only protects them from heat and ultraviolet radiation, but it also keeps sunlight out of their eyes so they can better see the players and the ball in play.
Residential shade canopies are made for backyards and patios and allow families to spend time outdoors free from direct contact with the sun.These fabrics can be custom manufactured to fit the dimensions of outdoor patio areas, porches, or backyard gathering spots.
All of our sun protection products are designed to look as good as they work.Both the textures and colors of these fabrics make them highly decorative additions to a playground, school, home, or office park.Just a few of the colors we have available include Black, Brown, Deep Sea Blue, Green, Medium Blue, Silver and Spiced Sand.Ask an Easy Rack specialist about which color, style, model, and custom size will work best for your environment and application.
Easy Rack carries a wide variety of commercial shelving, material handling equipment, commercial lighting, new and used gondola shelving, used pallet racks, and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with warehouses located throughout the United States that enable us to service all 50 states including Washington DC, Nashville-Davidson, Tennessee, Las Vegas, Nevada. Portland, Oregon, Oklahoma City, Oklahoma, Tucson, Arizona, Long Beach, California, Atlanta, Georgia, Fresno, California, Sacramento, CA, Corpus Christi, TX, Plano, Texas, Garland, TX, Laredo, Texas, Lubbock, TX, Jersey City, NJ Newark, New Jersey.
Canvas & Fabric Sun Shade Structures & Awning Canopies.
The commercial and residential applications of shade structures are unlimited.The advantages offered by reduced light transmittance, heat absorption, and transfer of heat make a real economic difference.The trained specialists at Easy Rack can review the requirements of every environment and design a site-specific, custom shade structure that will offer maximum solar protection at a very competitive price.Our shade structures are engineered to withstand the many forces of nature, including wind, rain, and snow.
The sun protection that results from the use of these coverings is a great benefit to humans, animals, and even many species of plants. A number of special covering types exist for you to choose from.
Ultraviolet Protection Canopies
These shade structures prevent UV rays from harming children.They are permanent structures available in multiple sizes and colors.They are maintenance free, and they are engineered to withstand winds of up to 80 miles per hour.They are great for churches, schools, playgrounds, and hospitals and they block 95% of harmful UV rays.
Tension Shade Structures for Clear Span Protection
These coverings are constructed using tension membranes that offer shade to large expanses of ground.They vary in size and style..There are many different build styles from which to choose.You can select frame supports, air supports, cable net, and cable and struts.There are also geodesic dome structures and grid shells structures.
One of the more common structural elements found in these veritable tension structures is the use of steel supports that work in conjunction with tension cables that shape and support the fabric top.Such designs offer an added advantage to the reduction of wind and snow loads.They also offer greater flexibility in design than standard building materials.
A number of advanced outdoor fabrics are used to make these stretched membrane structures.These materials include PVC coated polyester fabrics, PTFE coated glass fabrics, stretched membrane structures, PTFE coated glass fabrics, EFTE foils, and polyethylene coated fabrics.Choosing the best fabric for a specific tension structure guarantees superior textile architecture.
Shade Structures in Standard and Custom Designs
Standard and custom shade structures are available in a wide range of forms.Custom structures are always done in accordance to the specific needs of the client.
Modular Shade Structures
Modular shade structures are intended to be attractive, affordable solutions for seasonal or temporary use.They are available in many fabric colors and come with braces and brace plates that are ideal for securing frames.They can also be ordered with waterproof tops.
Triangular Truss Shade System
Triangular Truss shade structures are durable and easy to install.The shade panels are attached to aluminum trusses that have springs for easy installation and removal.Aluminum components and galvanized columns ensure years of maintenance free usage.
Warren Truss Shade System
These shade structures allow for better column spacing than that which is offered by conventional pipe frame systems.They provide an economic means of giving shade to larger expanses.The entire Warren system is flexible and can be engineered to meet applicable building codes and modified to suit specific needs.
Easy Rack carries a wide variety of commercial shelving, material handling equipment, commercial lighting, new and used gondola shelving, used pallet racks, and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with warehouses located throughout the United States that enable us to service all 50 states including Washington DC, Nashville-Davidson, Tennessee, Las Vegas, Nevada. Portland, Oregon, Oklahoma City, Oklahoma, Tucson, Arizona, Long Beach, California, Atlanta, Georgia, Fresno, California, Sacramento, CA, Corpus Christi, TX, Plano, Texas, Garland, TX, Laredo, Texas, Lubbock, TX, Jersey City, NJ Newark, New Jersey.
Stack racks allow warehouses to make the most of space by protecting products and equipment in contained structures that can be placed on top of one another in vertical arrangements as high as five units tall.When these racks are not in use, they can be stored in even more compact, consolidated arrangements to minimize consumption of storage space needed for other equipment and materials.Many different types of stack racks exist for specific material types and material handling needs, and most are portable to some degree to combine mobility with efficiency in space management.
Nesting Stack Racks.
Nesting portable stack racks designed to protect products from damage, consolidate storage space, facilitate easy storage of otherwise difficult to store items, and reduce time and money spent on handling product within your facility.Most of these racks can be stacked three to five high if they are fully loaded, or they can be stored and/or shipped in tight, compact bundles. Nesting racks come in a variety of models and sizes to accommodate products of all sizes and weights
Tire Storage Stack Racks
Tire racks can be ordered in many different styles.Our most popular is a design that features perforated decking that allows water from sprinklers to pass through to the ground.This type of stack rack is completely compliant with even the strictest of fire codes that prohibit storage systems that can potentially block sprinkler water.Another popular design is the wire mesh decking.This is a good rack to use for used tires or low price point tires.The center post tire rack is the most affordable and simple design we offer, and are very easy to load and unload.Tire racks can be placed on pallet and can hold up to 2,000 pounds when pallets are stacked five high.
Nursery Racks
These stack racks are designed to accommodate the sensitivity of nursery stock that is being transported or stored.Sturdy shelving allows these racks to be stack up to 5 high without crushing seedlings.The unique design of these systems also encourages air circulations to keep plants cool and protect them from heat.
Railcar Shipping Racks
These racks allow for double stacking inside of rail cars, doubling the content capacity of each box car.The concept of the rail rack is amazingly simple.The first row of product goes under the rail rack, and the second row sits on top of it.
Custom Stack Racks
Many heavy items and heavy-duty applications require a custom stack rack be constructed that will accommodate specific dimensions or specific product loads.
Shipping Racks
Shipping and receiving areas can experience some very heavy-duty, if not downright brutal activity at times.Products such as glass, side panels, hoods, catalytic converters, and transmissions can be destroyed with a single, accidental collision.To protect products that are being transported to and from docks, shipping stack racks offer both mobility and protection.Most models are designed with sides that can fold down so they can be stored in compact, efficient stacks.
Special shipping racks can be built to stack 2 high during shipment and as much as 5 high during warehouse storage.
Suspended Roll Stack Racks
Suspended roll racks can be used to protect any type of sensitive, rolled material.These specialty storage tools use a core beam design that holds the roll up off the floor and prevents it from ever touching the ground.They can be accessed with a fork lift or a hoist.These racks can be stacked up to 3 high.
Coiled Roll Stack Racks
Coiled material of any kind can be much heavier than one might expect.Coil stack racks are ideal for storing heavy material such as steel coil in consolidated, efficiently utilized space with a minimum risk of injury or damage.Coils can be stacked up to 5 high, and the entire structure can be moved with a forklift.
Easy Rack carries a wide variety of display gondola shelving.used pallet racks, commercial shelving, material handling equipment, commercial lighting,and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with warehouses located throughout the United States that enable us to service all 50 states including New York NY, Los Angeles CA, Miami, FL. Chicago, IL. Denver CO., New Orleans, La., Cleveland, Ohio, Kansas City, Mo., Mesa, Arizona, Virginia Beach, Va., Omaha, Nebraska, Oakland, California, Miami, Florida, Tulsa, Oklahoma, Minneapolis, Minnesota, Colorado Springs, Colorado, Arlington, Texas, Beaumont, Tx.
Self Dumping Hoppers automatically dumps load when bumper release contacts the side of the trash dumpster. Hopper returns to an standing and locked position automatically after it dumps it load. All forklift self dumping hoppers includes a cable that may be operated from the seat of the fork truck to manually dump the hopper. A safety control is provided to secure the hopper to the fork truck. Usable fork pockets are 7½"W x 2½"H. Optional leak proof design sold separately. ER-D-25, ER-D-33, ER-D-50, ER-D-75, and ER-D-100 are stackable if you stack the top hopper turned 90° from the bottom. Blue baked-in powder-coated is standard with exception of models ER-D-300-HD-NA, ER-D-350-HD, ER-D-400-HD & ER-D-500-HD. Must be attached to forklift when dumping.
By investing in self dumping hoppers it is possible to ensure that materials are properly stored and if necessary, disposed of in a safe and simple manner. These modern hoppers fit onto most standard fork lifts and will allow for materials to be moved from one location to another and then dumped in a matter of seconds.
In simple terms, a self dumping hopper is a large box on a hinged base that is filled with waste products in the workplace. When the hopper is completely filled, it can be picked up on a standard fork lift and then moved to another location. While still in situ on the forks, a mechanism can be released that will allow the hopper to pivot forwards and allow the contents to be dumped. In essence, attaching a hopper in this way extends the functionality of a forklift into a utility truck at a comparatively low cost.
Thanks to high quality construction and sensible design precautions, the whole range of self dumping hoppers offer complete security in use, and are able to be manipulated to prevent accidental loss of contents in transit.
With a range of different capacity hoppers available, every workplace need is fully covered. From relatively small 2,000lb containers through to hoppers with a capacity of 6,000lb, whatever your needs, there is a model to suit you, and they come in a range of styles that are ready for many different purposes.
Depending on the capacity of hopper that you require, and also the range of uses that you need it for, there are a number of models available. You can chose from hoppers with a full 90 degree tilt to ensure complete discharge of waste when dumping, or more restricted hoppers that rotate forwards a smaller amount, giving more control of the pour.
You can choose open fronted hoppers that are designed to carry waste such as crushed boxes and long planks of wood, or deeper fully contained versions which are suitable for dust and even liquids. Most self dumping hoppers feature a fully laser welded construction that prevents any leakage in use.
In order to facilitate easy installation, the self dumping hoppers feature a simple release mechanism that only requires a cable to be run from the hopper into the cab and then pulled when in the correct position. A spring then ensures the smooth return once the load has been dropped.
For a long life and to ensure that they remain hard wearing, the hoppers produced by Easy Rack are powder coated and made using high precision robot welding for a leak free finish that will last. The base of the hoppers is ¼ inch steel for added strength in use. The simple mechanisms are precision made for a smooth action in use, and additional reliability. Additional options that can be added include casters for easier movement around the workplace when being filled, and hard wearing poly plastic lids to keep the contents from spilling out, and to create a much tidier environment.
As you continue to read through our selection of Industrial Steel Self Dumping Hoppers, keep in mind we stand ready to answer any questions you may have about our offerings. Easy Rack carries a wide variety of commercial shelving, material handling equipment, commercial lighting, used pallet racks, and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with regional distribution centers located in all 50 States including New YorkNY, Los AngelesCA, Miami, FL. Chicago, IL. Denver CO., Dallas TX, San Antonio, TX, Austin, TX, Boise ID, Atlanta GA, Albuquerque NM, Raleigh-Durham NC, Washington DC, Albuquerque NM, Huntsville AL, Fayetteville AR, Norfolk VA , Madison WI, Jersey City, NJ Newark, New Jersey.
Industrial gates provide temporary barriers to keep areas free from traffic and safe for workers to perform tasks. Folding gates may be used indoors and outdoors as either stand alone units or units connected in a series to form longer barriers.Steel gates can be placed around sensitive areas at night to aid in security and taken up the next morning.Other models can be used indoors by cleaning crews who need to keep wet floors off limits to pedestrian and vehicle traffic.Safety gates are also excellent tools for construction crews who need to cordon off piles of debris that occasionally accumulate during the course of the day.
Easy Rack supplies both used and new industrial gates, folding gates, safety gates, and steel gates in a wide range of sizes for factories and warehouses.Easy Rack specialists will consult with you over the phone and help you choose the right security gates and industrial gates for your facility at no charge for their time.We will also coordinate drop shipping of any new or used industrial gates anywhere in the United States.
The following are just a few of the steel and folding gates we make available to warehouses, factories, and construction crews.
The expand-a-gate expands from a collapsed width of 14.5" to 144" maximum.It is an ideal stand-alone barrier that is designed to temporarily prohibit access to areas for cleaning or safety concerns.Multiple folding gates may be connected end-to-end to form longer runs.This is especially useful to construction operations that may need to section off half of an entire new floor.The Expand-A-Gate features heavy-duty construction with painted yellow & black finish and is available in all steel or all aluminium construction.
These 15-gauge steel folding gates are manufactured for fast installation.You can use them to secure outside access during the day and add security at night with heavy-duty Durable 3" rubber casters allow the operator to quickly and fully retract gate when not in use.The center drop pin rests in a pre-drilled hole to secure the steel gate when extended.A lock is located on the right side of single gates. Each gate is constructed of steel U-channels riveted back-to-back using aircraft quality rivets and heavy-duty 1½" x 1½" vertical angles.It is then galvanized for durability.
*Easy Rack includes all necessary installation hardware with your order. Contact Easy Rack directly for a full range of sizes.
Portable gates are perfect for many applications.Workers can use them to block equipment, personnel and entrances.They are also useful barriers to use for security both inside and outside of buildings. Portable gates expand and lock to close off any opening. When they are not in use, simply fold them up, roll away and store. Easy Rack supplies an optional add-on section to create larger runs.
Easy Rack carries a wide variety of commercial shelving, material handling equipment, commercial lighting, used pallet racks, and modular prefab buildings installed nationwide. If you cannot find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with warehouses located throughout the United States that enable us to service all 50 states including Memphis, Tennessee, Baltimore, Maryland, Irving, Texas, Amarillo, TX, Brownsville, Texas
When the amount of space available within your building is at a premium, and you need more storage space but cannot sacrifice any of your production area, then there are only a few options open to you.For many people, their first instinct is to extend their building to accommodate additional space, but this is a costly and time consuming option.It is much more effective to choose to install a steel storage mezzanine that will provide you with a massive amount of additional space within your existing building without the need for a costly extension.
If you choose to build an external extension to your existing facilities, then you will need to appoint an architect, builders, and then have the whole project approved and signed off.From the time when you first start the process of having the building work done until the time you are able to move your equipment in can be a period of months, and the impact on your productivity during that time will be severe.It can be so time consuming to build an extension to a factory that many businesses relocate.With a steel storage mezzanine, you have none of these problems.
Thanks to its entirely modular construction, and the fact that each unit is specially designed for the exact needs of your workplace, a steel storage mezzanine will provide you with exactly how much additional space you need without any hassles, and thanks to it being flexible, it will grow with you, and allow for further expansion in the future.
Easy Rack is one of the leading producers of internal modular construction systems, Easy Rack is able to provide a wide range of steel storage mezzanine systems that can be installed in your premises quickly and effectively with none of the logistical problems that an entirely new external building would create.
A mezzanine allows you to expand into space that you already have, giving you the most cost effective way of creating more storage room, while thanks to the high quality of the materials used, the wide spans between the supporting legs and the advanced design of this steel storage mezzanine installation, there is little impact on the amount of usable space available underneath.
The steel storage mezzanine sales provided by Easy Rack include the whole process of planning, delivering, and installing the units in your facility.Our involvement throughout the whole process of delivering the system that you want enables us to provide a first class service, and a product that is entirely designed and made to your exact needs.The level of detailed planning that goes into each unit is astonishing, and aspects such as the specific seismic loads that the unit is likely to face are considered in its manufacture.
For convenience, the whole of the steel storage mezzanine installation can be constructed without a single weld.This means that when it is time to move on or to extend further, your mezzanine can be adapted to the new requirements, or simply knocked down for transportation to a new location where it can be rebuilt in a matter of hours.
You can choose from a number of different designs for your mezzanine including open areas with a guard rail for protection, or a fully enclosed room that can be accessed through a lockable door in order to provide a place to store expensive or valuable products.
Easy Rack carries a wide variety of commercial shelving, material handling equipment, commercial lighting, used pallet racks, and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with regional distribution centers located in all 50 States including New YorkNY, Los AngelesCA, Miami, FL. Chicago, IL. Denver CO., Dallas TX,
The modular storage building is one of the most versatile structures in existence.So many and broad are its applications that it is used in both commercial and residential environments.Industries, hospitals, and schools use these buildings to store items that would otherwise consume too much interior space within their buildings.
Homeowners love these buildings even more.They are ideal places for storing lawn tools, home maintenance equipment, and power tools.Many residents who purchase them also use them as personal workshops.
The Easy Rack Storage Building has an interior that measures 45 feet wide by 74 feet high.Inside as well, there is floor that stands 5 and three quarter inches above the ground.This floor keeps products dry.Interior air space is also kept dry by built in rain gutters for water drainage.This keeps water from accumulating on the roof and leaking in.
One of the key advantages this modular building offers is portability.It can be moved completely intact as is, with a forklift.
There are many benefits that modular storage buildings offer.First off, they are far less expensive than buildings which require traditional construction materials and techniques.Secondly, having one of these buildings onsite helps an organization save space.Considering that anything stored consumes area within the vertical cube, it becomes readily apparent how valuable this can be to a warehouse, public school, or commercial office complex with limited interior area.
Modular buildings are so popular now that many manufacturers will custom build them to specific dimensions.This has made them prolific in virtually every vertical market.
Finally, the portability of a modular building is another great benefit to any company that cannot afford to lose time.When all that is required to move a building is a few short minutes on a forklift, process flow can be maintained and production remain on schedule.
Modular buildings are not just used in factories and warehouses.They are often used by schools.Schools must keep a large number of supplies on hand.These things include desks, paper, tables, and books.Also, cleaning supplies have to be kept in bulk to keep the school in good working order.One or more modular buildings are ideal places to store these materials in order to conserve limited space within smaller school buildings.
Churches also frequently use storage buildings.Today�s churches do much more than hold traditional services.It is now common to see even the smaller churches hosting outdoor festivals, concerts, putting on plays, and holding outdoor events.Chairs and tables are needed for these events.Other special materials may be needed as well, depending on the activity.A modular building gives the church a place to store all of these items without having to store them in the main sanctuary.
Healthcare establishments are also using modular buildings now to store a wide range of supplies.Anything vital to hospital maintenance that is not tied directly to in room patient care can be stored safely in these buildings without risk of contamination, and without risk of damage to materials.
Office buildings also use storage buildings to store equipment for maintaining exterior grounds.Fertilizer, maintenance supplies, and landscaping tools can be kept out of the elements and neatly arranged in one of these buildings.
Easy Rack carries a wide variety of commercial shelving, material handling equipment, new and used gondola shelving, used pallet racks, and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with warehouses located throughout the United States that enable us to service all 50 states
Fully portable table top strapping machines are used to tighten and seal poly-propylene strapping around products, packages, boxes, bundles of wood, parcels, and other supplies that needs to be held together more than 3" in diameter.
Easy Rack offers small businesses that have some level of shipping or packaging needs an economical and durable low volume solution. Mass production and packaging companies like newspapers, magazines, shipping businesses almost certainly use automatic strapping machines.
Commercial & industrial business application of strapping machines include magazine publishing, lumber companies, post offices, small distribution newspaper printing companies, food packaging plants, book publishers and general merchandize packaging.
Easy Rack?s table top strapping machines automatically tensions strap and joins the ends with a secure heat weld. The motor automatically switches off when not in use. As the strap is inserted, the motor automatically restarts. Wall plug is standard 15V single phase 15 amp.
Small companies that need pallets or skids strapped Easy Rack offers a semi-automatic probe strapping machine that eliminates hand strapping and speed up the process of pallet strapping with this semi-automatic pallet strapping equipment. Strapping unit automatically feeds the desired polypropylene strap through the pallet, tightens and seals the strap around the pallet. 115V power supply.
Pallet Strapping Machine Operation: (a) Unfold chute/leg (b) Push chute/leg into pallet (c) Feed polypropylene strap (d) Insert tip of strap into strap-way (e) Adjust tension, pulling automatically into heat seal (f ) Strip is then cut off to feed the strap out (g) One-cycle automatically complete. (h) Remove machine and insert into next pallet.
*Strapping is not included.
Pallet Strapping Machine Benefits:
User Friendly
Tension up to 175lbs.
40" Foldable Arm Probe
Uses 3/8", 1/2" and 5/8" Poly Strapping
If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with warehouses located throughout the United States that enable us to service all 50 states including New YorkNY, Los AngelesCA, Miami, FL. Chicago, IL. Denver CO., El Paso, Texas, Dallas TX, San Antonio, TX, Austin, TX, Boise ID, Atlanta GA, Albuquerque NM, Raleigh-Durham NC, Washington DC, Albuquerque NM, Huntsville AL, Fayetteville AR, Norfolk VA , Madison WI., Corpus Christi, TX, Plano, Texas, Garland, TX, Laredo, Texas, Lubbock, TX.
Cost Effective Efficient film delivery, one man operation, and low maintenance contribute to the systems practicality.
Extra Stretch Wrap Film Available Optional Digital Scale Available
Flexible Pallet Wrap Machines. This Semi-Automatic system had a 48" diameter heavy duty steel top non skid tread plate. Maximum load size 76"; Maximum wrapped load height 78"; Maximum film roll diameter 11". Detachable film mast for easy storage. Ergonomic foot pedal control; variable speed motor. Variable tension control. Cushion start, cushion stop.
Easy Rack?s stretch wrap machines are user friendly using a touch-screen control center provides warehouse workers proficient control of the stretch wrapping process. The state of the art digital control circuit allows the stretch wrapping machine operator to set the number of pallet rack rotations and film wrapping patterns. The pallet wrapping operator simply ties off the film stretch rap on the carousel and presses the start button. When the stretch wrap machine has completed the wrapping process, the operator cuts the film wrap and removes the wrapped pallet rack. The 60" round carousel has variable speed, 0-13 rpm, with soft start and stop feature. Photocell sensors automatically adjust to different pallet heights. 20" film wrap can be set to a 240% or 340% pre-stretch with 4 standard multifunction wrapping patterns. Ships knockdown. Some assembly required.
Easy Rack offers a complete inventory of material handling equipment of all types. Our wide selection of both new and used material handling equipment offers a safe and economical way for employees to efficiently do their jobs on a day-to-day basis. The tangible benefits companies can count on receiving in return for their investment is improved time to market, reduced risk of injury and subsequent insurance costs, and reduced and possibly eliminated overtime all of which drive overhead down and profits up.
If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with warehouses located throughout the United States that enable us to service all 50 states including New YorkNY, Los AngelesCA, Miami, FL. Chicago, IL. Denver CO., El Paso, Texas, Dallas TX, San Antonio, TX, Austin, TX, Boise ID, Atlanta GA, Albuquerque NM, Raleigh-Durham NC, Washington DC, Albuquerque NM, Huntsville AL, Fayetteville AR, Norfolk VA , Madison WI., Corpus Christi, TX, Plano, Texas, Garland, TX, Laredo, Texas, Lubbock, TX
One of the main goals of the modern business is to remain as flexible as possible.In the same way as the mammals were able to conquer the world after the death of the dinosaurs thanks to their high speed and intelligence, businesses have evolved to be smaller and smarter in the past few years, and any tool that can add to the advantage is important.Portable buildings allow your business to make even better use of existing space than ever before, and thanks to the fact that they can be easily moved from one place to another within your existing workspace, they will never get in the way of expansion and change.
While a generation ago, planning for the long term could be detailed and exact, and most directors would know where they intended to be ten years ahead, the rapid changes of the modern market mean that such detailed strategic planning is no longer possible, and instead of knowing the exact structure of future expansion, it is much more important to build flexibility into the way that the future is planned for.
One key area that modern businesses often overlook when laying out their strategy is the usage of space within their buildings.While it may be the case that some things never change - such as the fact that a certain number of staff will always be employed to do a specific task, changing needs elsewhere in the business may demand that a certain area needs to expand, or contract.By using temporary portable buildings within your factory or other industrial building, it is possible to relocate a division at the stroke of a pen, and thanks to the ease with which a modular portable building can be moved to a different place using a forklift truck, your plans can be achieved quickly and easily, without having to compromise on the quality of the installation, or the accommodation available to your highly valued staff.
In the past, a big concern about using portable temporary buildings was that they might be made of low quality materials, and not offer a good long term solution for accommodating staff.This is certainly not the case any more.Modern buildings make use of high technology materials that are cut using computer precision in order to ensure the perfect fit is achieved every time.With high quality noise deadening layers built into the walls and floors, and proper glass windows, the effect is one of permanence, and the feeling of the finish is one of quality.Unlike the old insubstantial portable buildings that were no more than a lightweight structure that would not last long, modern versions are built to the highest standards, and can feature a wide range of different finishes to suit all business types.
From small office spaces and lunch rooms to go inside your factory area through to rest rooms and storage areas with all the services including electricity and water ready to go, the modern range of top quality temporary portable buildings available from Easy Rack is certain not to disappoint you.
Easy Rack carries a wide variety of commercial shelving, material handling equipment, commercial lighting, used pallet racks, and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with regional distribution centers located in all 50 States including New YorkNY, Los AngelesCA, Miami, FL. Chicago, IL. Denver CO., Dallas TX, San Antonio, TX, Austin, TX, Boise ID, Atlanta GA, Albuquerque NM, Raleigh-Durham NC, Washington DC, Albuquerque NM, Huntsville AL, Fayetteville AR, Norfolk VA , Madison WI.
Thank you for assisting me with a professional tennis court lighting package. I had received several quotes from specialty contractors and found your prices to be considerably more attractive. Our home builder has agreed to install the commercial lighting kit for us with the help of his electrical contractor. Your website has all the pertinent information that is necessary for a homeowner or to learn about your lighting products before ordering them. We are most definitely enjoying our new tennis court lighting system. - Marsha Wiggins
We recently contracted Easy Rack to furnish and install pallet racking and commercial shelving in our new distribution center. I must admit, at first I was skeptical purchasing from an online material handling vendor like Easy Rack for such a large project. However, your team came out and measured our facility, made specific recommendations and provided a professional quote for used pallet racks that was far less than the other bids we received. I appreciate your attention to detail. - Sherry Bledsoe
As a commercial building contractor who has projects going all over the country, we have many logistical headaches and crucial deadlines to meet. During one of those critical completion deadlines, I needed six commercial parking lot pole lights and quick. I was most impressed with Easy Rack�s ability to have six commercial lighting fixtures in will call the very next morning! I plan to use Easy Rack for all my commercial lighting needs going forward.You guys are amazing! - Dena Dennie
I own small retail center that has several rusty steel pipe bollards protecting the front door. Your customer service agent suggested that I consider purchasing decorative plastic bollard covers to dress things up. I originally discovered your website looking for commercial lighting fixtures and quickly learned that you have many interesting safety related products. I�ll be back soon for more. - Sam Whitfield
Thanks Easy Rack!We are done shoveling snow at work.Our new snow plow forklift attachment has made it really easy and efficient to clear a path between warehouses.Before we had this handy tool it was a real challenge trying to conduct business on days with snow. - Greg Fox
Before purchasing plastic speed bumps from Easy Rack, we had a real problem with parents and nannies that sped through the carpool line at pick up. They have proved to be a good deterrent and they have eliminated a very serious problem at our MontessoriSchool. - Chad Womack
Thank you for your help and expense in getting my pallet rack plight resolved. The used pallet racking is up and very useful. Everyone says they are very helpful. - Linda Borgman, New Harmony Presbytery, Flurence, SC.
I have spent hours online researching parking lot lighting packages and found your commercial lighting fixtures and prices to be some of the best I found. Your staff was able to answer all my questions and even provide a photometric layout for my architect. I can't thank you enough for helping achieve my parking lot lighting goals and spend my hard earned money wisely. - Robert Walls
My garage was a wreck until I purchased used open back shelving from Easy Rack. Your customer service department was very nice to help me determine the right model and quantity I needed. Frankly, I was surprised at the price for used over new steel shelving. I had looked around and found Easy Rack to be most competitive. I will be back. - Hannah Malone
I had no idea when I got into the material handling business that a 55-gallon drum heater would be necessary for dispensing liquids. I was having trouble dispensing polymers when the temperature was less than 50 degrees. The consultants at Easy Rack suggested using a drum heater to improve viscosity and it solved the problem.You guys sure know your business. - Mark Cripple
When we elected to install
school bus stop shelters at several of our routes, we contacted Easy Rack for a cost effective solution. After several modular building designs and cost estimates, we decided to go with a modular bus stop shelter with glass panels on three sides and a bench.We have been pleased with the finished product and the performance of your installation crew. - Chuck Spivey
Our business has been terrific and we needed to expand our warehouse storage to meet demands. Our first inclination was to purchase
pallet racks.However, after talking to the knowledgeable sales associates at Easy Rack we elected to purchase used industrial long span shelving which saved us literally thousands of dollars. Your storage experts were very helpful in recommending several options and I wanted to thank you personally. - Jeff Shafer
We recently installed (40) high bay lights that we purchased from your guys on order #48625. One of the HID lamps failed after a few days and I was concerned that this may be an ongoing problem. Since installing the replacement metal halide lamp that you sent, we have had no problems.The amount of light we now have in the warehouse is incredible compared to the old fluorescent lights we removed. - Jimmy Edwards
When we decided to expand our warehouse facility, we looked at several shelving options and talked to many pallet rack vendors.Your space planners suggested that we install a steel storage mezzanine system to gain more warehouse and storage capacity. Easy Rack was the only online vendor to make that recommendation. Thanks - Joe Mackey
I was amazed at the difference in price between new and used pallet racks. Thanks to Easy Rack, I was able to purchase the pallet racking I needed without going over my initial budget. I really appreciate your design assistance and the recommendation on new lighting fixtures in our warehouse. - Hank Shepherd
Moving heavy rolls of carpet, roll after roll with our new carpet dolly has made installing carpet much easier and more profitable. We no longer struggle getting carpet from our truck to the job.The carpet dolly has good balance and the heavy duty wheels glide over bumps and thresholds. - Juan Ramos
I wanted to let you know the 15' outdoor pole light arrived and we installed it according to your instructions.My kid�s now play basketball at night on our outdoor sports court without bothering the neighbors.FYI - That was a good idea to show the neighbor the fixture before we purchased the unit.Everybody is happy. - Tammy Frazier
You guys really know your stuff. The
4,000 pound pallet master we purchased is awesome. We are having no trouble moving heavy pallets in our warehouse with this new machine. The extra $300 I spent to get the larger capacity was well worth the money. - Chuck Burney
I want to thank you for taking the time to help me find a replacement lens for my wall pack lighting fixture. I tried several other online vendors and you were the only one that would help me. In hindsight, it probably would have made more sense to just buy another one but, my light was less than a year old. Thanks for going the extra mile. - Shelly Waters
The four truck mounted jib cranes we purchased have been a real lifesaver. I run a small delivery company that services the oil patch and we are always transporting heavy items such as valves and large tools. With oil prices up, business is good and we needed to put a few more truck on the road. This has allowed us to expand our fleet and move more products. Thanks! - Earl Williams
My Chiropractor suggested I contact you. I have worked on heavy equipment for years and it has ruined my back. The ergonomic back support cushion I purchased has certainly helped ease the pain. You have no idea how much better I feel. Thanks so much! - Donald Baskin
We purchased a 20' rolling ladder for our warehouse. It arrived damaged and your customer service department arranged for a replacement, no questions asked. It is such a breath of fresh air to work with a company who cares about taking care of its clients. Rest assured we will be back for more industrial supplies before the end of the year. - Bob Lawson
Steel Removable Fold Up Security Bollards, Protective Set In Concrete Parking Barriers & Bollard Covers.
Bollards are short vertical posts that serve a variety of safety related purposes in an industrial environment. They create partial barriers that protect people, supplies, and equipment from accidental impacts from forklifts and other large material handling tools.
Easy Rack bollards come in a wide range of sizes and mounting options, offering today�s warehouses and factories the full gamut of choices necessary to separating sensitive areas from areas of heavy traffic.
Bollards actually originated as outdoor safety devices around shipping docks, and they can still be used both outdoors and indoors today. Many warehouses use them near delivery access points to prevent trucks from backing into doors and walls. Other specialized types carried by Easy Rack have specific applications to indoor industrial environments.
The following list represents just a few of the many styles clients of Easy Rack can select from in either new or used condition.
This is the most common type of bollard and can be used both indoors and outdoors to protect work areas, racking and personnel. Consisting of a welded steel construction, they are extremely durable and impact resistant.
Cigarette butts thrown on the floor can cause everything from slips to fires. A smoker�s bollard solves this problem by giving employees on break a designated point of disposal that trap smoke and eliminates fire litter. The unit features a removable top that is connected to the steel container that holds the butt, and it can be locked with a padlock or combination lock to secure the top.
The unique design features an offset base plate that won't interfere with traffic. The base plate includes 4 pre-drilled mounting holes. A removable rubber top cap and black/yellow safety tape comes included with the unit.
These bollards can be set permanently in concrete. The extra length of the pour in place bollard allows you to maintain the needed height while fixing the bollard in concrete. It comes with welded anchoring tabs and a removable cap so the bollard can be filled with concrete to increase its strength and durability.
Chrome-plated bollards add a more attractive touch to the environment. These units are made from a hollow steel core and feature a removable top cap that allows the core to be filled with concrete for greater strength and stability.
Removable Bollard A removable Bollard comes with a sleeve that can be set in concrete to hold the bollard. When access is needed into an area that is protected by the bollard, simply lift the bollard out of the sleeve. Replace the bollard in its sleeve to reinstate the protective barrier. Powder coated yellow for high visibility. Sleeve is included.
Like chrome-plated units, removable ornamental bollards are both functional and decorative. They are ideal for barrier access to restricted parking areas. They include eyes for attaching chain or rope and can be padlocked as well. Socket covers move over holes to prevent the socket tops from protruding above the surface.
This is another bollard that proves ideal for blocking off restricted parking areas. It is designed to slide down into the ground or floor when not needed. Each unit includes a sleeve that can be set in the ground with concrete, and it has a handle in the top to allow for easy lifting and lowering.
The folding bollard provides a secure, adjustable, barrier to secure areas. The bollard locks in the raised position with a padlock (padlock not included). When the padlock is removed, the bollard may be lowered to the ground to allow for access.
Movable Bollards provides portable visual barrier when an area needs temporary protection. They are ideal for keeping traffic out of hazardous areas or areas under repair. They can be used either indoors or outdoors and are manufactured with mold-on-rubber wheels standard.
This bollard can be ordered with a light/siren option that adds a visual and audible warning to personnel. The unique spring-loaded design will bend and not break like rigid bollards. Unit is very energy efficient and only requires two 9-volt batteries to operate.
Easy Rack carries a wide variety of commercial shelving, material handling equipment, commercial lighting, used pallet racks, and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you.
Used Pallet Racks & Used Pallet Rack Decking
Used pallet racks offer savings of up to 40% for companies that
require the structural stability, safety, and organizational benefits of pallet
racking systems. Used pallet racks are equivalent in quality and performance to
new systems. A wide range of types and styles can be obtained at significant
discounts through an Easy Rack material handling specialist.Pallet racking systems can be standard
or custom built according to environment, terrain, indoor or outdoor conditions,
and seismic quality of the floor or ground on which they are installed.
Used Teardrop
Pallet Racks
Teardrop
pallet racks are the industrial standard for most pallet racking applications.
They feature a boltless design that makes it easier to assemble and adjust them.
The boltless design also offers the additional benefit of keeping the platform
more stable and preventing buckling in the middle.Easy Racks� used teardrop pallet racks
are braced with heavy channel steel and supported by tensile steel columns to
provide you with the safest and most reliablewww.easyrack.orgONT>
Industrial & Heavy Duty Used Pallet
Racks
Heavy
duty used pallet rack have metal shelving designed for high traffic and fork
truck access.�Industrial� is a
synonym for �heavy duty� and often refers to pallet racking with weight
capacities of up to 48,000 pounds.They are constructed from structural steel and designed to withstand
occasional fork truck collisions.
Used Pallet
Rack Decking
Used wire decking is the most popular type of decking installed in
used pallet racks. Easy Rack supplies all three major forms of wire decking:
waterfall, reverse waterfall, and lay-in decking.Wire decks offer the advantage of
allowing dust and debris to fall through to the floor.Also, if the sprinkler system is
triggered, the water will run through the wire rather than collecting around
components. Fire codes are beginning to require this so that fire suppression
systems can more effectively put out fire.
Wood
decks can also be obtained by special request, but are not generally recommended
due to the trend to use wire for fire codes. Heavy duty steel decking should be
used for heavy duty industrial storage.
Used Pallet
Rack Systems
Easy Rack
material handling specialists will help you custom build your system and
coordinate the installation of your racks. Two of our most popular system types
are warehouse pallet systems and structural pallet systems.
Used Warehouse Pallet Racking Used
warehouse pallet racks are designed to function as organizational and storage
starting points for operations that anticipate growth or expansion.These systems are designed for
adaptation and modification as process flow increases or changes.Custom systems can be built from used
pallet rack decking and structural supports that maximize your existing vertical
cube and floor space, provide you with the best storage density within safety
parameters, and facilitate either hand or fork truck access.
Used Structural Pallet Rack Used
Structural Pallet Racks are extra sturdy, more stable, and more impact resistant
than standard rolled pallet rack systems. Structural upright systems are
available in a variety of well-known, standard styles that include, but are not
limited Inca, Sturdibilt, Steel King, Frazier, Arco, and Speedrack.Some pallet racking systems are designed
for use exclusively indoors, while others can be used outdoors in construction
or shipping areas.
If you
are unsure which type of rack, support, style, or decking to order with your
used system, call 1-888-776-3720
and provide an Easy Rack specialist with the details of your
storage volume and inventory cycle and we will run the necessary calculations to
locate the optimal system for your needs.
Easy
Rack carries a wide variety of used pallet racks, commercial shelving, material handling equipment, commercial lighting,
used pallet racking,and modular prefab
buildings installed nationwide. If you can not find
what you are looking for call us toll free at 1-888-776-3720 and
we will find it for you. Our home office is located in Houston,
Texas with warehouses located throughout the United States that
enable us to service all 50 states including New York NY, Los Angeles CA, Miami,
FL. Chicago, IL. Denver CO., New
Orleans, La., Cleveland, Ohio, Kansas
City, Mo., Mesa,
Arizona, Virginia Beach, Va., Omaha, Nebraska, Oakland, California, Miami,
Florida, Tulsa, Oklahoma, Minneapolis, Minnesota, Colorado Springs, Colorado,
Arlington, Texas, Beaumont, Texas, Denton, TX, McKinney, Texas, Midland, TX,
Killeen, Texas, Dallas TX, San Antonio, TX, Austin, TX, ALBQ, NYC, LA,
MPLS.
One of the most important areas of any production process is the ability to move equipment and materials easily from one person to the next in order to ensure that they will be able to carry out their work efficiently without having to waste time gathering things together.Utility carts are one of the main means for moving things around the factory or warehouse, and are a general piece of equipment that come in many different forms to cover various different tasks.
You can get a number of different styles of utility cart to suit whatever cargo you need to move, and whatever kind of job that needs to be carried out.From light weight plastic utility carts that feature straightforward containers on a number of different levels through to heavy duty carts designed to carry a much heavier selection of weights.
The most popular plastic utility carts typically boast 3 trays on different levels that are removable for loading and cleaning, and can easily be filled with whatever tools and equipment is required.These lightweight carts have four sturdy wheels, and can easily handle weights up to around 65 lb depending on the configuration of the cart that you choose.
The trays are 24” by 36”, which leaves plenty of space for whatever cargo you need to move, and have a handy 4” lip around all fours sides to ensure that the load is unable to simply roll off when the cart is being moved around.
Choose from either a two level utility cart that allows for plenty of space in the lower tier for bulkier items, and can carry a total of 47lb, or opt for the 34 tier design that carries up to 65lb, but will not allow as much space.
As useful in offices as a mail truck as they are for moving light industrial equipment around a warehouse, your staff will find that the simple design with 2 swivel and two fixed casters makes the utility carts available from Easy Rack a useful addition to their standard equipment.
Simple assembly, and a design that has been thought out to require very little ongoing maintenance mean that from the moment that you get the cart ready for service it will become a fixture in your facility, and soon pay for itself in view of the increased efficiency that it will offer for staff when they are moving equipment and items around from one location to another.
Thanks to its rugged construction and stable design, the utility cart can be used almost anywhere, and for almost any light weight load, meaning that it is extremely flexible and can fit in with your plans from the moment it is ready to use.
Although the utility cart is not really designed for heavy duty work, and can only carry relatively light weights around from one place to another within the factory or other working environment, you will still find that the sheer variety of roles that this small cart is capable of will more than justify your investment in it, not least because it will free up more expensive heavy duty carts for other work around the facility.
As you continue to read through our selection of Utility Carts, keep in mind we stand ready to answer any questions you may have about our offerings. Call us at 1-888-776-3720 whenever such questions arise and let us help you make the best investment within your budget. We are located in Houston, Texas.
Easy Rack carries a wide variety of commercial shelving, material handling equipment, commercial lighting, used pallet racks, and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with regional distribution centers located in all 50 States including New YorkNY, Los AngelesCA, Miami, FL. Chicago, IL. Denver CO., Dallas TX, San Antonio, TX, Austin, TX, Boise ID, Atlanta GA, Albuquerque NM, Raleigh-Durham NC, Washington DC, Albuquerque NM, Huntsville AL, Fayetteville AR, Norfolk VA , Madison WI.
Wire shelving units are ideal for any industrial, office, retail, or food service organization.They represent one of the most durable and adaptable types of storage in existence.They are easy to configure for use in any environment thanks to their adjustability.Any number of item types and sizes can be stored on these systems, depending on the individual weight capacities and size of each shelf and the total capacity of the unit itself.
The greatest benefit that wire shelving systems bring to businesses is the ability to transform unused and empty space into organized storage space.After everything is consolidated, accessibility improves once workers know where to find materials and supplies.Operations become efficient and streamlined.Employee morale improves as well because the frustration factor of always feeling behind has been removed.
Safety is another thing that improves when materials and inventory are neatly arranged in proper rows and bins.When nothing is cluttered about on the floor, trip hazards are minimized.Wire also improves the safety factor of a building in the event of a fire.It will not burn, and it allows water from sprinkler systems to pass through it in the event of a fire.
�They are heavily used in the restaurant industry.
�Health care systems rely on them as well.
�Wire shelving systems are idea for the storage of computer parts.
�Offices require wire storage units for storing supplies and paperwork.
�Mobile wire units are used to store and move objects that require transport.
Many people are surprised to learn that wire shelving units are used in restaurant storage.
This should not be a surprise when we consider that there is more to a restaurant than the dining area.Behind the dining area, there lies a huge volume of stock.Everything from cooking utensils, cook ware, and food products must be stored and inventoried.Trucks are constantly restocking supplies as food is prepared and consumed. The back of a restaurant is often busier than the shipping and receiving dock in a small warehouse.
Because wire shelving systems are available in all in all sizes and can be mounted in any number of ways, even a small restaurant can turn the most limited or oddly-shaped spaces in the kitchen into organized, efficient storage areas.
The most important factor to consider when buying wire shelving systems is thesize and mounting style that will offer the maximum conversion of vertical and horizontal cube space into storage space.A few simple questions can help guide the decision.
�Is there a small space that would work best with shelves that mount directly to the wall?
�Is there a high ceiling or a low ceiling?
�Is there a small room where a wire unit on vertical stands can fill the back wall?
�Is there a need for transporting stored products?
The answers to these questions help narrow down options to the best possible unit for the task.
Easy Rack carries a wide variety of used pallet racks, commercial shelving, material handling equipment, commercial lighting,and modular prefab buildings installed nationwide. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with warehouses located throughout the United States that enable us to service all 50 states.
RSS News Feed
Join us on Facebook!
Quick Find
Subscribe to receive the latest news & specials on our products:
Used storage racks prove ideal for facilities needing to convert empty wall-space into storage space for boxes and non-hazardous materials that require less care and handling and less attention to maintain.
Choosing the right build and material for your storage rack depends on the nature and weight of the materials you are storing.
.jpg)
Masonry
Tow/Load/Haul
In Plant Modular Offices Prefabricated Installation & Sales Nationwide.
In plant Modular offices can be supplied to your exact specifications, and will allow you the ability to create a dedicated office space in the heart of your operations that will provide you with the space in which to work and run your business with easy access to the areas of the business that your decisions will directly affect. 
The nature of the in plant modular office systems provided by Easy Rack means that you can specify the exact space that you need, and then the office can be installed to meet your needs. No matter how many people that you need to accommodate, and the restrictions that are in place due to the amount of space available, the in plant office systems are designed to give you what you need. 
LED Commercial Outdoor Lighting.
With manufactured prefabricated buildings such as those provided by Easy Rack, the main advantage is that the systems are completely modular.
Couple this flexibility of manufactured prefabricated buildings with the fact that the construction process is so much cleaner than traditional methods, and you get accommodation that is ready much faster, and without any of the negative aspects of building such as the immense amounts of dirt, dust and other waste that the process creates.
•
Prefabricated Commercial Modular Clean Room Sales & Installation Services Nationwide.
Modular Cold Storage Buildings
Thanks to the ever changing nature of business, and the fact that maintaining a competitive edge is dependent on the ability to adapt, many businesses find that they have constantly changing requirements when it comes to the internal office space in their buildings.
One of the key advantages of a modular office building is that it is ready to grow with you, and thanks to the latest construction methods and the quality of the components that are supplied by Easy Rack, you will be able to get started on a project and complete it very fast.
.jpg)
.jpg)
.jpg)
Nylon Netting
Protective and Protection Netting
Modular
Another advantage of modular building construction is that if your needs change over the lifetime of the building, changes can be made very simply.
Modular Prefabricated Environmental Enclosures & Buildings.
In its simplest form, an environmental enclosure is simply a room within a building where the operators have a great deal of control over all factors that affect the interior.
Modular Prefabricated Lunchrooms & Break Rooms.
Prefabricated Modular Office Partitions, Commercial Wall Dividers & Installation Services. 
The actual facilities in the booths can be specified by you when you order, and a comprehensive range of equipment is available to ensure that the system you get fully meets your needs.
The main requirements of a security guard shack are that the building is able to protect the occupant, and allow them a great deal of access to the surrounding area.
Shade canopies provide important protection from the sun�s damaging rays.
Canvas & Fabric Sun Shade Structures & Awning Canopies.
Ultraviolet Protection Canopies
A number of advanced outdoor fabrics are used to make these stretched membrane structures.
Nesting Stack Racks.
Tire Storage Stack Racks
Railcar Shipping Racks
Shipping Racks
Suspended Roll Stack Racks
Coiled Roll Stack Racks
Steel Storage Mezzanine Installation & Sales Nationwide.
While a generation ago, planning for the long term could be detailed and exact, and most directors would know where they intended to be ten years ahead, the rapid changes of the modern market mean that such detailed strategic planning is no longer possible, and instead of knowing the exact structure of future expansion, it is much more important to build flexibility into the way that the future is planned for.
The greatest benefit that 
Safety is another thing that improves when materials and inventory are neatly arranged in proper rows and bins.
There are many other advantages of a 
