Shark Bite "Standard" Tooth Bars for 1/2" or 3/4"
Blade are the most popular tooth bars for Skid-Steer and other loaders
in the 800 to 1800 lbs capacity range. Quality materials and workmanship produce
a tough long lasting tooth bar. Shanks are 1" Heat Treated Cast Steel and
conform to ASTM 4150 for greater strength and abrasion resistance. Features
include 1/2" x 4" beveled mounting bar, 1 3/4" wide fabricated
pin-on teeth - 3/16" side roll pin and mounting brackets with dual elongated
holes. Simple and quick to install. Slip the tooth bar onto your blade, mark
and drill a hole on each side. Install the two 3/4" bolts and nuts, tighten
and it's ready to dig.
See table below for Specs.
BUCKET SIZE (I.D. WIDTH OF BUCKET) |
NO. OF TEETH |
30" to 41" |
5 |
42" to 53" |
6 |
54" to 64" |
7 |
65" to 68" |
8 |
69" to 75" |
8 |
76" to 78" |
9 |
79" to 84" |
9 |
Please Note: The following dimensions are required
when ordering tooth bars: Bucket inside width - Bucket I.D. and thickness of
cutting blade.
*Please select appropriate options when ordering.
Available Options: |
Width: |
|
|