Loading Dock Lift

EasyRack Dock Lifts

Transfer Loads from any truck bed height to any loading dock height... even ground level!

The Advantage of a EasyRack Dock Lift:

Dock lifts are more versatile than dock levelers, faster than manual loading and unloading, safer than ramps and inclines, and less expensive than recesses truck wells. That's why every building should have a EasyRack Dock Lift.

A Model for Every Application:

EasyRack offers seven standard dock lift modelswith capacities from 5,000 to 20,000 lbs., platform sizes up to 8' x 12' and a variety of installation configurations to accommodate any loading dock requirement. Models featuring an "M" designation are built for use with two wheel dollies, hand carts,  and hand pallet trucks. "H" model designations can be used with powered devices like powered pallet trucks, counterbalanced stackers and fork lift trucks.

The Fast, Safe, Easy Way to Service Any Truck:

With nearly 5' of travel range, dock lifts can service any type of truck from vans and pickups to tractor trialers and container trucks. Loads on dock lifts are always kept level making transport safer and easier than traveling up or down inclines created by dock levelers or ramps.

Rugged Weatherproof Construction:

All EasyRack Dock Lifts are manufactured with structurally reinforced heavy steel plate platforms to minimize deflection. Wide base design provides increases rigidity to create the industry's most stable dock lift. Model SWDL5-59 and SWDL6-59 DURADOCK" dock lifts feature corrosion resistant galvanized base and legs as standard, resulting in longer trouble-free service even in hostile environments. 

Pit of Top of Ground Mounting:

EasyRack Dock Lifts can be recessed in a pit for ground level lowering or surface mounted on a concrete pad (requires optional ramp for grade level access).

Features and Options

Mechanical Features:

Bevel toe guard platform

Diamond tread deck for improved traction

Diamond tread hinged throw-over plate with lifting chain

Removable steel handrails with mid-rail, 4' side kick plate and safety chain

Maintenance strut supports lift for servicing

Removable lifting eyes for ease of installation

Conforms to ANSI MH 29.1 Standards

Electrical/Hydraulic Features:

Pre-wired power unit and control panel

Weatherproof NEMA 4 push-button control pendant with 20' coil cord

Oversized, low pressure hydraulic cylinders

Heavy-Duty hoses with burst strength 4x greater than operating pressure

Flow control valve with adjustable lowering time

Excess flow protection for controlled descent of lift in the unlikely event of a hydraulic line rupture

Standard Voltages: 208/230/460V - 3 Phase

Options and Accessories:

Grade level access ramp (for above ground lifts)

Accordion skirting or roller shade

NEMA 4 enclosures

Environmentally friendly biodegradable hydraulic fluid (standard on Dura-Dock models)

Mechanical wheel chock to prevent fork truck from inadvertently rolling off lift while elevated

Upper travel limit switch- mounted and wired

Warning bell with flashing light

Special paint finishes and custom colors

Corrosion resistant coatings (standard on Dura-Dock models)

Other bridge plate sizes available

Specifications

H-Series - Heavy-Duty Dock Lifts

Model	Lift Capacity	Roll-Over Capacity	Standard Platform	Maximum Platform	Vertical Travel	Low Height	Throw-Over Plate	Rise Time	Motor	Approx. Weight
SWDL10-59H	10,000 lbs	10, 000 lbs	6' x 10'	8' x 12'	59"	16"	18" x 60"	34 sec.	5 HP	5,000 lbs
SWDL 12- 59H	12,000 lbs	12,000 lbs	6' x 10'	8' x 12'	59"	16"	18" x 60"	36 sec.	5 HP	5,200 lbs
SWDL16-59H	16,000 lbs	16,000 lbs	6' x 10'	8' x 12'	59"	16"	18" x 60"	50 sec.	5 HP	5,500 lbs
SWDL 20-59H	20,000 lbs	20,000 lbs	6' x 11'	8' x 12'	59"	22"	18" x 60"	60 sec.	5 HP	7,900 lbs

This Web Page Created with PageBreeze Free HTML Editor