Gas Cylinder Storage Racks

While there are many creative and innovative ways to transport and store all kinds of materials, gas cylinders are very important exceptions to the convenient storage rule. Due to the many hazards associated with compressed, and sometimes toxic gases, these cylinders require special storage racks and cabinets specifically designed for the purpose of safely handling and maintaining and inventory of compressed, liquefied gases contained in portable cylinders.

If you improperly store or handle gas cylinders, you risk creating some very severe safety hazards including, but not limited to, fire, contamination of the environment, asphyxiation, and possible explosion. Not only do these hazards represent heavy penalties and fines if your facility is found in violation of NFPA safety codes, but the level of risk these dangers represent literally make it a matter of life and death to properly handle and store gas cylinders correctly and safely.

Gas cylinder storage racks and cabinets represent an investment you canʼt afford NOT to make. A number of models can be obtained from Easy Rack that will keep your facility in full compliance with safety codes and help keep your property and employees safe from worse-case scenario accidents.

Portable Cylinder Clutcher
This portable gas cylinder rack is engineered for lifting and moving LP tanks. It offers smooth, ergonomic, automatic control that allows the operator to simply raise and lower handle while in use. This portable cylinder clutcher works with gas cylinder diameters that range from 8½ " to 12½". It includes two rigid and one swivel caster for easy, ergonomic maneuverability.

Cylinder Caddies
You can safely transport cylinders safely with these fork-mounted or pallet jack style gas cylinder racks. These units can hold anywhere from 2 to 6 cylinders each, and they come complete with safety chains to secure cylinders in place. Made of all steel construction, these cylinder caddy racks hold cylinders up to 9-1/2" in diameter.

Wall Mounted Single Cylinder Cabinet Brackets
These ingenious wall mounted gas cylinder storage cabinets are designed to store one LP cylinder each. The unit is easy to install. Simply bolt it to a wall and then secure the cylinder to the cabinet bracket with the strap. You can choose either steel or molded plastic brackets, and you can also order an optional steel chain for extra safety.

Welded Cylinder Torch Cart
Cutting torches with a gas cylinder fuel cell require their own portable cabinet to safely transport. The welded cylinder torch cart does exactly this. It is intended to contain and transport a cutting torch wherever it is needed. This portable cylinder torch cart includes gas cylinder tank storage cabinets, torch holding brackets, a torch holding box, and an overhead crane lifting point. Two handles and fork pockets allow it to be moved either by hand or with a fork truck. The unit rolls smoothly on two 10" x 3½" pneumatic wheels.

Gas Cylinder Tank Truck
The LP-6 is an all-in-one cart that allows users to transport gas cylinders to the location they are needed, and then switch out tanks in a safe and efficient manner. With a sturdy, user friendly design, this gas cylinder tank truck is the ergonomic solution to the many lifting, transporting, and storing problems associate with LP tanks. The built in crane can be used to safely load full gas cylinders into fork trucks. The crane pivots 360 degrees for maximum versatility. The tank attachment at the end of the boom utilizes steel hooks to securely clamp each end of the cylinder. Built in racks allow for convenient storage of gas cylinders in two sets of racks. The lighter, empty gas cylinders can be easily removed from the fork truck by hand and stored in the two vertical racks. Full gas cylinders can be stored in the four horizontal racks, allowing them to be picked up by the built in crane. Simply pull the pin, and the top racks pivot outward easily to allow access to the bottom two tanks. Units feature two rigid and two swivel casters for easy portability, and a floor lock is included to keep the unit immobile while in use. The ergonomic push handle is bolted in, and is easily removable. The crane boom is raised and lowered with a manual hand pump hydraulic lift. This allows one operator to raise the gas cylinder from the storage racks on the unit, or to lower them from the fork with a convenient lowering valve.

Easy Rack carries a plethora of Material handling supplies, commercial shelving, material handling equipment, commercial lighting, used pallet racks, and modular prefab buildings delivered and installed nationwide.

If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you. Our home office is located in Houston, Texas with regional distribution centers located in all 50 States including New York NY, Los Angeles CA, Miami, FL. Chicago, IL. Denver CO., Dallas TX, San Antonio, TX, Austin, TX, Boise ID, Atlanta GA, Albuquerque NM, Raleigh-Durham NC, Washington DC, Albuquerque NM, Huntsville AL, Fayetteville AR, Norfolk VA , Madison WI.

Gas Cylinder Storage Cabinets & Storage Shelving Racks at Discount Prices from Easy Rack.

Gas cylinder storage cabinets and gas cylinder racks allow you to safely store cylindrical containers in specially designated places. This is important because such containers often contain sensitive supplies or hazardous materials that require a specially designated location for storage. Gas cylinder racks can be purchased from Easy Rack in used or new models, and a variety of material builds and sizes are available through your Easy Rack specialist.

Easy Rack also supplies special moving tools for gas cylinders so you can load and unload them safely from cabinets and racks during times of high activity and/or maintenance.

Cylinder Caddies
Cylinder caddies are come in either fork mounted or pallet style designs. They allow you to safely transport cylinders to and from cabinets and racks with a minimum of stress and possibility of content spillage. These units can hold anywhere from 2 to 6 gas cylinders and come complete with safety chains to secure contents firmly in place. Cylinder caddies are made with all steel construction, and they can store gas cylinders up to 9-1/2" in diameter.

Galvanized Gas Cylinder Storage Cabinets
Store cylinders of all sizes in these heavy duty Gas Cylinder Discount Storage Cabinets. Constructed of rugged galvanized steel, each rust resistant unit has steel angle frames, 8-gauge galvanized welded wire, and a 12 gauge galvanized steel roof.

In addition, a galvanized rust resistant finish helps the unit to stand up even further to harsh indoor and outdoor environments. These gas cylinder storage racks can store 4, 8, or 16 units horizontally and 10-20 units vertically.

Galvanized gas cylinder racks feature padlock hasps for security, display a "Danger Flammable Material" sign, and meet with all OSHA 1910.110 requirements. All necessary anchoring hardware is included with your order.

Assembly is required and can be performed by Easy Rack upon request.

Fork Truck LP Tank Storage
This gas cylinder storage rack features all steel construction and holds up to 6 LP tanks measuring as much as 12” in diameter. Each fork truck mounted gas cylinder caddie unit comes with safety chains to hold the tanks in place. Units with casters may also be ordered from Easy Rack to allow for more precision control in transporting and position.

Easy Rack carries a wide variety of used storage racks, commercial shelving, bulk storage racks, material-handling equipment, commercial warehouse lighting, used pallet racks, and modular prefab shelters installed nationwide. We drop ship both used and new equipment anywhere in the United States. If you cannot find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you.

Our headquarters is located in Houston, Texas with regional distribution centers located throughout the United States that enable us to service all 50 states including New York NY, Denver CO., El Paso, Texas, Dallas TX, San Antonio, TX, Austin, TX, Boise ID, Atlanta GA, Albuquerque NM, Raleigh-Durham NC, Washington DC, Albuquerque NM, Los Angeles CA, Miami, FL. Chicago, IL., Huntsville AL, Fayetteville AR, Norfolk VA, Madison WI., Corpus Christi, TX, Plano, Texas, Garland, TX, Laredo, Texas, Lubbock, TX, Jersey City, NJ Newark, New Jersey.

We invite you to learn more about gas cylinder storage racks and shelving storage supplies by visiting our material handling blog. There you will find many interesting articles covering all types of new and used material handling equipment.