Easy Rack’s edge of dock leveler permanently installs to face of dock. It is designed for docks to be at least forty-eight (48) inches high. When the trailer pulls away, the lip drops automatically behind the face of the bumpers. Concrete recess is not required. It comes complete with 2″ x 8″ x 18″ dock bumpers and installation manual. Standard ramping is twenty-nine (29) inches, (29-13/16″ with 30,000 lb. capacity), with a (36-5/8″) inch long ramping length available for smaller grade. A steel dock edge, or approach ramp is required for proper installation.

 Our mechanical dock leveler is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The worker then pushes the handle forward until the lip rests on the truck bed. As the trailer leaves, the lip retracts behind the bumper face automatically.

Our manual hydraulic hand pump system is used to lift the leveler and extend the lip. The employee activates the lowering valve permitting the deck to come down and rest upon the trailer. Hydraulic dock leveler comes complete with hand pump, wall-mount brackets, cylinder, 15 feet of hydraulic line and oil. Truck must pull away from dock for leveler to return to stored position.

Our electric hydraulic edge of dock leveler is simple to operate. After the truck is backed against the dock, push and hold the control button. The leveler raises and the lip will extend. 115V, 1-phase power standard. Electric dock leveler comes complete with motor, pump, control box, cylinder, lines, and oil. Truck must pull out for leveler to return to stored position.

For A FREE Dock Leveler Quote Call 888-776-3720