Portable Security Gates

Each gate is made from two 6 ft. wide sections and stands 6 1/2 ft. tall when folded. It can be easily carried through any standard door and rolled easily for storage. Additional 6ʼ sections can be added to a gate so it can be used to cover larger openings or to block off outdoor areas. The gate is made from standard type 14 gauge channel and locks to the wall by means of a locking bar and padlock.

A number of organizations and institutions use portable security gates to protect their property and restrict access on an as need basis.

Hospital Portable Security Gates
Traffic in hospitals falls off greatly after visiting hours. Only those people who are spending the night with a loved one tend to be in the building. These individuals do not need access to the entire building. They only require access to the personʼs room, break rooms, and restrooms. Hospitals will use steel portable security gates to block access to hallways that are not being used and to limit access to specific units by blocking off all entryways except for one. This keeps the facility quieter so patients can rest. It also helps keep the hospital cleaner by only allowing only limited traffic in hallways.

School Portable Security Gates
Schools have to keep a close watch on theft and vandalism. They commonly use portable security gates both in the building and outside the building to prevent access to the building. Places such as athletic equipment storage areas, science labs, cafeterias, and school offices are vulnerable to break-in if not protected. Certain outdoor structures and areas can also be the targets of vandalism. Portable folding security gates can be placed in front of these areas as a protective measure.

Construction Site Portable Security Gates
Many times when buildings are erected doorways are immediately cut in the wall. However, the interior of the new structure is not yet ready for general human occupancy. Workers who assume that an open door in the side of the building is the best and quickest way to enter may walk into any number of dangerous, or even deadly, safety hazards. Portable security gates placed over these doors can literally save a workerʼs life. Some crews may required by safety codes to use them. If you are a general contractor, mechanical contractor, or electrical contractor, it is always good to keep portable industrial security gates on hand just in case.

Public Event Portable Security Gate
Cities will often host public events and holiday celebrations at the city hall or civic center. Portable security gates are ideal for these events in two respects. They can be used to cordon off sidewalks that lead to areas where people do not need to be. Doorways into the building can be blocked with them as well it to prevent access to sensitive areas, and interior hallways that lead to break areas and restrooms can be open to the public and adjoining areas blocked with portable metal security gates.

Choosing Your Portable Security Gate
Decide if you will mount the gate within the entrance or in front of the door casing to the entrance, and measure the appropriate height or width. Consult with an Easy Rack specialist if you need a custom size, or find a standard size portable security gate in our inventory that matches the dimensions you require.

Easy Rack specialists can answer all questions. If you can not find what you are looking for call us toll free at 1-888-776-3720 and we will find it for you or we invite you to visit our material handling blog for a plethora of information on hose reels and material handling products.

Our industrial distribution center is located in downtown Houston, Texas with regional hubs located in all 50 States including New York NY, Los Angeles CA, Miami, FL. Chicago, IL. Denver CO., Dallas TX, San Antonio, TX, Austin, TX, Boise ID, Atlanta GA, Albuquerque NM, Raleigh-Durham NC, Washington DC, Albuquerque NM, Huntsville AL, Fayetteville AR, Norfolk VA , Madison WI

Folding Security Gates

Folding Security Gates limit access to buildings and passageways without blocking ventilation or obstructing visibility. Warehouses and factories often use folding security gates to protect building entrances, bay doors, docks, and rear entrances to plants. Educational facilities and medical care institutions also use them to restrict building access after normal working hours. Homes and offices can also benefits from folding security gates when extra security measures are desired and determined appropriate.

The classic folding gate design is that of an interlocking lattice of steel, riveted back to back to provide a sturdy barrier against intrusion and to withstand exposure to environmental elements. Standard sizes offered by Easy Rack from 4-1/2' wide by 5-1/2' high single gates to 16' wide by 8-1/2' high double gates. Door gates are made for door openings between 24” to 48” wide in heights from 61” to 83”. Portable gates are available in sizes 6 and 12 feet wide. Easy Rack will also provide custom size single and double security folding gates up to 10’ high.

Folding Security Door Gates
These gates are made to secure door openings ranging from 24" to 48" wide and 61" to 83" high. They feature a unique reversible hinge design that allows them to be mounted to either the right side or the left side of the doorway in either the casing or the face of the opening. Each folding security door gate includes with a locking bar that can be secured with a padlock. When not in use, the gate will pivot 180 degrees out of the way when open.

Single Folding Security Gates
These one piece gates are manufactured for standard openings, patio doors, garages, and industrial and commercial entrances measuring 4-1/2' to 7-1/2' wide and up to 8' in height. Single folding security gates are shipped assembled to lock on the left (default position), but an Easy Rack specialist can have them manufactured to lock on the right side. A ball bearing caster, welded to the lead rail of the gate, is used to aid in the extension and retraction of the gate. Like door gates, single gates will pivot 180 degrees when not in use. To compensate from the loss of structure when the gate is stretched open, a drop pin holds the center of the gate in place.

Double Folding Security Gates
These gates are needed for larger openings, overhead doors, dock doors, storefronts, and bay doors in factories and warehouses. These two-piece gates can be custom fitted to any size width, and a maximum height of 10'. Because they are Double Folding Gates, each side will swing 180 degrees out of the way, allowing the gates to be used with dock and overhead doors in industrial facilities that need an unobstructed passage for vehicles and material handling equipment to pass through.

Portable Folding Security Gates
These gates are very frequently used in public schools and hospitals to seal off hallways, cafeteria areas, and sensitive areas within the building. They are made with a a two piece design consisting of dual 6’ X 6.5’ sections. Portable Folding Security Gates are easy to install because they are designed to pass through standard door heights and be can be rolled up for convenient storage. For very large entrances or hallways, additional 6’ sections can be added on.

If you can not find what you are looking for contact us toll free at 1-888-776-3720 and we will find it for you. Read our testimonials section, product reviews or visit our material handling blog to learn more about Easy Rack.

Our home office is located in Houston, Texas with regional distribution centers located in all 50 States including New York NY, Los Angeles CA, Miami, FL. Chicago, IL. Denver CO., Dallas TX, San Antonio, TX, Austin, TX, Boise ID, Atlanta GA, Albuquerque NM, Raleigh-Durham NC, Washington DC, Albuquerque NM, Huntsville AL, Fayetteville AR, Norfolk VA , Madison WI.